Sawing Products

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content
Circular saw blades designed for smooth, fast cuts; less vibration; longer life - TheFabricator.com

Circular saw blades designed for smooth, fast cuts; less vibration; longer life

August 30, 2010

The M. K. Morse Co. has introduced Metal Devil NXT™ metal cutting circular saw blades. The line comprises 10 new steel cutting blades from 5-3/8 to 14 in. The blades' rake angles and tooth geometries have been optimized for each diameter of blade, resulting in smooth, fast cuts; less...

Continue Reading

Pneumatic saw, quick-clamp assembly can be used wherever 90-PSI compressed air supply is available - TheFabricator

Pneumatic saw, quick-clamp assembly can be used wherever 90-PSI compressed air supply is available

July 12, 2010

Esco Tool offers the APS-438 air-powered saw and quick-clamp assembly. The 3-HP saw allows users to cut steel plate up to 2 in. thick and 15 ft. wide wherever a 90-PSI compressed-air supply is...

Continue Reading

Concentrated cutting fluids introduced

June 21, 2010

DoALL Sawing Products' Cutting Fluids Division has introduced the Ultra series of cutting fluids, including Kool-ALL Ultra®, Kleen-Kool Ultra®, and Power-Cut Ultra®. Concentrated forms of...

Continue Reading

Integrated sawing, machining center designed for tubing, solid bar industries

June 7, 2010

Rattunde Corp. has introduced the ACS + CFMcurve integrated sawing and machining center for the tubing and solid bar industry. The ACS sawing function uses electronics, servomotors, and...

Continue Reading

High-speed miter saw designed for cutting aluminum, brass, other relatively soft nonferrous materials - TheFabricator

High-speed miter saw designed for cutting aluminum, brass, other relatively soft nonferrous materials

May 3, 2010

The model KM10HS, a 10-in., high-speed miter saw from Kalamazoo Industries, is designed for cutting aluminum, brass, and other relatively soft nonferrous materials. The saw miters 45 degrees left, 60...

Continue Reading

Sawing system designed for both ferrous, nonferrous materials

March 15, 2010

Advanced Machine & Engineering Co. (AME) offers the AMSAW® S300, a sawing system designed to cut both ferrous and nonferrous materials. It has a capacity of 3 to 12 in. and uses saw blade...

Continue Reading

Pipe saw and track system cuts concrete-lined, ash, superduplex SST, other hard alloys

March 5, 2010

ESCO Tool offers a pneumatic pipe saw and wraparound track system for making square cuts to within ±0.0625 in. on heavy-wall pipe up to 60 in. in diameter and 4.375 in. thick. The APS-438...

Continue Reading

Double-column mitering band saw allows serial cutting of various lengths, sizes, blade speeds, quantities

March 5, 2010

Kalamazoo Machine Tool's model H6A-NC double-column mitering band saw is an automatic machine designed for vibration-free sawing of structural, solid, and difficult materials. The saw is programmable...

Continue Reading

Wet benchtop saw cuts up to 1.5-in. solids, 2.2-in pipe

March 5, 2010

Kalamazoo Industries offers the model K10WBT enclosed wet cutting benchtop abrasive saw. The manual saw has a capacity of up to 1.5-in. solids and 2.2-in. pipe. The saw features a magnetic switch; an...

Continue Reading

Double swivel band saw has quick-slide vise

February 9, 2010

Scotchman® Industries has introduced the DS-20 double swivel, 20-in. band saw. The horizontal band saw swings 45 degrees right or 60 degrees left with a quick-slide vise. The saw's capacity is 14...

Continue Reading

Plate saws available for both traverse and longitudinal sawing

January 12, 2010

Pat Mooney Saws offers the Nishijimax NHC-SQA automatic plate saws in two models.The NHC-850SQA is designed for traverse sawing of plate up to 3 in. thick and 24 in. wide. The NHC-8310SQA saws...

Continue Reading

Automatic carbide circular cold saw cuts up to 5.0-in.-rounds, 5.3-in. squares

January 12, 2010

The HCS 150 Behringer Eisele automatic carbide circular cold saw is available from Behringer Saws Inc. It cuts rounds up to 5.9 in. in diameter and squares up to 5.3 in. in size.All models are...

Continue Reading

Automated stop/gauge, pusher system attaches to new or existing cold saws, punch presses, ironworkers

December 15, 2009

TigerStop® offers automatic stop/gauge and pusher systems that attach to new or existing cold saws, punch presses, and ironworkers. They can be used as automated stop positioners or to push or...

Continue Reading

Manual cold saw suitable for prototype, limited production work

December 15, 2009

Kalamazoo Machine Tool has introduced the model C315/350 manual cold saw.The saw uses a solid, hinge-type design that makes it suitable for prototype work or for limited production work in certain...

Continue Reading

Band saw facilitates high-speed cutting, short cycle times

December 15, 2009

The HBM 540A/ALU band saw, designed for high-speed cutting of metals and short cycle times, is available from Behringer Saws Inc.Using bimetal or carbide-tipped saw blades, the heavy-duty machine cuts...

Continue Reading