Assembly and Joining Products

Assembly is much more than welding. This technology area covers adhesive mixing, metering, and dispensing equipment; hardware-insertion presses; clamps; fixtures, holders, jigs, and vises; part counters; part feeders; and part positioners.

Filter Content

Assembly press designed for short bed, large-stroke, daylight applications

April 15, 2008

Beckwood Press Co. manufactures an assembly press, designed for a short bed requirement, for large-stroke and daylight applications. The press, which features a two-post frame with a 10-in. bed...

Continue Reading

Remote compliance device corrects alignment errors in assembly applications

March 11, 2008

The Compensator, a remote center of compliance (RCC) device from ATI Industrial Automation, is designed to correct alignment errors with peg-in-hole automated assembly applications.The device features...

Continue Reading

Wire thread inserts eliminate need to account for tangs

February 12, 2008

Spiralock says that, in independent tests, bolts installed into the company's Drive Notch (DN™) wire thread inserts showed no loss of tension after 24 hours of continuous vibration (1 million...

Continue Reading

Fastener-installation press introduced

January 15, 2008

The new PEMSERTER® series 3000™l automatic fastener-installation press has been introduced by PennEngineering. According to the manufacturer, the press can install self-clinching fasteners...

Continue Reading

Servo-press workstations can be customized

September 11, 2007

Promess Inc. has introduced a line of customizable servo-press workstations, based on the company's electromechanical assembly press (EMAP), intelligent control, and sensor technologies integrated...

Continue Reading

Rivet machine designed for delicate applications

September 11, 2007

AIM Joraco offers a line of delicate rivet machines based on its standard line of Toggle-Aire® presses.The machine is a fully pneumatic press integrated with AC-powered, cam belt-driven rivet...

Continue Reading

Standard pin clamp enhanced

August 7, 2007

Humphrey Products Co., working with Japanese partner Koganei, has added a vanadium carbide coating to the pin on its standard pin clamp and redesigned the power lock cylinder.The company applied the...

Continue Reading

Press manually installs self-clinching fasteners

May 8, 2007

The PEMSERTER® Series 4® manual press can install self-clinching fasteners in applications in which automated systems would be impractical.The pneumatic-powered press uses shop air. An 18-in....

Continue Reading

Clamps provide enhanced ergonomics, holding power

January 9, 2007

DE-STA-CO's Horizontal Handle Hold-Down Action Clamps (models 2013, 2017, 2027, and 2037) deliver 60 percent more holding capacity than the legacy models in the same envelope, the company says.A knob...

Continue Reading

Hydra-pneumatic cylinder offers high-speed, all power-stoke operation

January 9, 2007

AEC/Hypercyl's HZ series hydra-pneumatic cylinders offers a power-stroke operation for various assembly clamping, piercing, metalworking, pressing, marking, resistance welding, and riveting...

Continue Reading

Vertical-handle clamps save space

November 7, 2006

Vertical-handle hold-down action clamps from De-Sta-Co allow users to save space without compromising holding capacity.Available in 2002, 2007, and 2010 series, the clamps have an ergonomic handle...

Continue Reading

Blind rivet fastener joins 1/8- to 7/8-in.-thick assemblies

November 7, 2006

Huck Fasteners' HuckLok™ blind rivet fastener provides a -in. grip range for joining a range of assemblies from truck bodies to HVAC. Assemblies from 1/8 to 7/8 in. thick can be joined.The...

Continue Reading

Impact riveter sets solid rivets up to 7/16 in. diameter

September 12, 2006

Orbitform has introduced the HP2000 hydrapneumatic impact riveter.The 20-ton-capacity riveter available with up to a 24-in. throat autofeeds and quickly sets solid rivets up to 7/16 in. diameter.Other...

Continue Reading

Robot vision system option available

September 12, 2006

FANUC Robotics America has introduced the iRVision™ integrated robot vision option for the company's R-J3iC controller.The ready-to-use vision system has a 2-D robot guidance tool to conduct...

Continue Reading

Pierce units are self-equalizing

August 8, 2006

Aries Eng. Co. Inc. offers the HyperPierce® self-equalizing press unit for high-production piercing and assembly. It incorporates HyperCyl® hydrapneumatic drive units.The press unit operates...

Continue Reading