Bending Products

The bending technology area includes all manner of machines and processes for bending sheet metal, including press brakes, folders, panel benders, corner formers, ironworkers, notchers, orbital formers, and roll benders. It also has information on accessories such as gauging and backgauging systems.

Filter Content

Punch presses handle workpieces up to 60 by 120 in.

August 9, 2011

LVD Strippit offers the Pullmax series of punch presses, including the LVD Pullmax 520, 530, 720, and 730 models. The machines perform punching, forming, marking, bending, and tapping. The hydraulic press drive combines with rapid table accelerations and high hit rates to produce prototypes,...

Continue Reading

Hydraulic sheet, plate rolls require no belts or extra gear-driving mechanisms - TheFabricator.com

Hydraulic sheet, plate rolls require no belts or extra gear-driving mechanisms

July 18, 2011

COMEQ offers 31 models of Americor hydraulic sheet and plate rolls in standard capacities from 3 ft. by 13 ga. to 10 ft. by 0.313 in. The machines are available in three-roll, single-initial-pinch and four-roll, double-pinch styles. Also available are two special four-roll, double-pinch models...

Continue Reading

Double-pinch hydraulic plate roll introduced - TheFabricator.com

Double-pinch hydraulic plate roll introduced

June 14, 2011

Carell Corp. has introduced the new SIHR series three-roll, double-pinch plate roll. Options include a heavy-duty, hydraulic-powered sheet support table; section dies installed on extended roll shafts for quick rolling of several types of barstock and structural sections; and LED digital...

Continue Reading

Press brake tooling designed to allow material to flow into die more evenly with less drag

June 14, 2011

LVD Strippit offers precision-ground tooling with the patented STONE® radius for its press brakes. The tooling is produced with a progressive radius on both sides of the V opening, allowing the material to flow into the die more evenly and with less drag. The radius helps ensure accurate bend...

Continue Reading

Four-roll plate rolling machine features simplified setup - TheFabricator.com

Four-roll plate rolling machine features simplified setup

April 4, 2011

Carell Corp. has introduced the HTH 20-150 four-roll, double-initial-pinch plate bending machine, which uses an automated work cycle for the production of cylindrical and radius segmental parts. Setup is simplified with the use of mechanical and electric limit devices. Autoloading and ejector...

Continue Reading

Press brake automation software designed to facilitate quick production

March 7, 2011

Haco-Atlantic has partnered with Robosoft to provide an automated production cell for press brakes. The software allows the production of a complete part in less than one minute, according to the manufacturer. The software can be used in combination with the new Haco robotic cell to provide...

Continue Reading

Press brake designed to eliminate bending axis misalignment

February 7, 2011

LA G has introduced the GBS internationally patented press brake. The press brake has an extremely rigid structure to help eliminate bending axis misalignment and the need for a deflection compensation system. The top beam is fixed to side frames that slide on eight linear guides. This eliminates...

Continue Reading

Power consumption reduction system incorporated in punch presses, press brakes - TheFabricator.com

Power consumption reduction system incorporated in punch presses, press brakes

January 31, 2011

LVD Strippit has incorporated the new Energy Reduction System (ERS) into its Strippit VX-series punch presses and PPEC series press brakes. The system manages power consumption during machine operation, standby, and idle times, reducing energy consumption by 15 to 30 percent over...

Continue Reading

All-electric tube bender holds up to eight tool sets - TheFabricator.com

All-electric tube bender holds up to eight tool sets

January 31, 2011

The ELECT XL™ all-electric, 12-axis tube bending machine from BLM Group USA is designed to bend tubes up to 6 in. in diameter. The multistack bender holds up to eight tool sets, permitting rapid processing of complex parts and quick changeover, according to the manufacturer. It can be...

Continue Reading

Angle roll has 6-in. pipe, 6-in. bending capacity - TheFabricator.com

Angle roll has 6-in. pipe, 6-in. bending capacity

January 3, 2011

Carell Corp. has introduced the 310HV4 angle roll with 6-in. pipe and 6-in. angle bending capacity. The three-driven-roll, double-initial-pinch, fully hydraulic universal roll bending machine has independent hydraulic adjustment of both lower bending rolls and hydraulic powered rotation of all...

Continue Reading

Press brake handles bend lengths from 79 to 276 in.

December 13, 2010

With models varying in capacity from 55 to 600 tons, Amada's new HD NT press brake series can handle applications in bend lengths from 79 to 276 in. This series features a hybrid drive system that is engineered for low energy consumption and requires less hydraulic fluid than conventional...

Continue Reading

Press brake features high-speed ram positioning - TheFabricator.com

Press brake features high-speed ram positioning

November 29, 2010

Bystronic's enhanced version of the Xpert press brake incorporates a high-speed ram-positioning system for reduced bending cycle times. The positioning system can reduce bend cycle times by 15 to 35 percent in reaching approach speeds of up to 600 IPM and bending speeds up to 47 IPM without...

Continue Reading

Press brake quick tool change system helps eliminate bad bends - TheFabricator.com

Press brake quick tool change system helps eliminate bad bends

October 18, 2010

Cincinnati Incorporated has introduced a new quick tool change system for Proform and Maxform press brakes, allowing faster setups and helping to eliminate bad bends caused by improperly seated tools. The factory-installed power clamping system bolts directly to the ram and is integrated into...

Continue Reading

Midrange press brake series available in 35- to 50-ton machines - TheFabricator.com

Midrange press brake series available in 35- to 50-ton machines

September 13, 2010

LVD Strippit now offers 35- to 50-ton configurations of its PPEC series of midrange press brakes. The machines achieve bending speeds up to 47 IPM. The Energy Reduction System (ERS) feature helps reduce the cost of operation by offering energy savings of up to 30 percent over comparable designs,...

Continue Reading

CNC tube benders feature extendability, new communication capabilities - TheFabricator.com

CNC tube benders feature extendability, new communication capabilities

August 30, 2010

Maruka offers the Chiyoda Kogyo EX series CNC tube benders with Windows® XP-based control system. The modularly designed main body has little interference area. The machine features the performance characteristics of the SP series CNC bending machine, along with extendability and new...

Continue Reading