Sawing Products

The sawing technology area has enough depth to cover more than just band and circular sawing machines. It has information on blade selection and use, lubricant selection, and sawing safety.

Filter Content

Manual cold saw suitable for prototype, limited production work

December 15, 2009

Kalamazoo Machine Tool has introduced the model C315/350 manual cold saw.The saw uses a solid, hinge-type design that makes it suitable for prototype work or for limited production work in certain...

Continue Reading

Band saw facilitates high-speed cutting, short cycle times

December 15, 2009

The HBM 540A/ALU band saw, designed for high-speed cutting of metals and short cycle times, is available from Behringer Saws Inc.Using bimetal or carbide-tipped saw blades, the heavy-duty machine cuts...

Continue Reading

Carbide-tipped band saw blades designed to cut various materials

November 10, 2009

The L.S. Starrett Co. has introduced a line of carbide-tipped band saw blades named Advanz™. The line offers a tooth tip cylinder of submicron-grain carbide with a triple-chip grind, welded to a...

Continue Reading

Sawing system cuts ferrous, nonferrous metals

October 13, 2009

Advanced Machine & Eng. Co. (AME) has announced the introduction of the AMSAW® S300 sawing system, designed to cut ferrous and nonferrous metals.Its capacity is 3 to 12 in., and it uses cermet or...

Continue Reading

Vertical column cold saw suitable for high-volume work

September 9, 2009

The Kalamazoo Machine Tool Model C320SA vertical column cold saw is designed for semiautomatic production sawing of tubes, profiles, and small solids. The saw features two spindle speeds, 17 and 34...

Continue Reading

Circular sawing machines hold cut-length tolerances as close as ±0.0008 in.

September 9, 2009

Klingelhofer Corp.'s Bimax automatic circular sawing machines are designed for accurate cutting of bars, tubes, and shapes.The high-precision Swiss machines hold cut length tolerances as close as...

Continue Reading

Benchtop miter band saw has variable electronic speed control, ergonomic grip

August 11, 2009

Dayton's benchtop dry cut miter band saw features a variable electronic speed control and ergonomic grip with a built-in start/stop switch. The saw head swivels and locks for miter cutting while the...

Continue Reading

Horizontal band saw now available with hydraulic vising

July 20, 2009

Marvel Mfg. Co., Oshkosh, Wis., has announced that its Spartan Model S330 horizontal band saw now is available with hydraulic vising.The new Model S330HV features an hydraulic work holding vise in...

Continue Reading

Vacuum system for carbide circular saws introduced

July 20, 2009

Marvel Mfg. Co., Oshkosh, Wis., has introduced a vacuum system for use with carbide circular saws used in cutting tubing.The vacuum removes the hardened chips from the center of the tube, preventing...

Continue Reading

Twin post band saw designed for specialty steels

July 20, 2009

Marvel Mfg. Co., Oshkosh, Wis., has added the PA460-HD production band saw designed to cut specialty steels to its Spartan line.The twin post machine combines rigid construction, a 10-HP blade drive,...

Continue Reading

Band saw handles large billets, bundles

July 20, 2009

Marvel Mfg. Co., Oshkosh, Wis., has added the PA700HD production band saw with a capacity of 28 in. by 32 in. to its Spartan line. The saw is suitable for large billets and bundles.The twin post...

Continue Reading

Band saw blades suitable for interrupted cutting applications

July 14, 2009

The L.S. Starrett Co. has introduced the Versatix™ MP line of multipurpose band saw blades. They feature a new tooth design that is suitable for interrupted cutting applications in structural...

Continue Reading

Automatic band saw for job shops released

June 9, 2009

Hyd-Mech Group Ltd. has released the SM10CNC single-miter automatic band saw for job shops. It features a 10-in. round or 7 - by 11-in. capacity at 90 degrees; a 1-in. blade; a 2.5-HP direct-drive...

Continue Reading

V-blocks facilitate cutting with 14-in. saws

May 12, 2009

The M. K. Morse Co. offers Metal Devil® V-blocks for cutting with 14-in. saws. The blocks strengthen clamping performance of a saw's vise system by holding round, square, and rectangular materials...

Continue Reading

10.25-in. carbide saw introduced

May 11, 2009

Tsune America LLc has added the TK5C-260G ferrous carbide saw to its product line. The machine is equipped with a resharpenable 830 mm diameter carbide saw blade that provides a cutting capacity from...

Continue Reading