Waterjet Cutting Products

The waterjet cutting technology area has information on the machines and processes, but it doesn't stop there. It also covers abrasives, hoses, nozzles, and pumps.

Filter Content
Waterjet pump can run continuously at 60,000 PSI - TheFabricator.com

Waterjet pump can run continuously at 60,000 PSI

November 8, 2010

OMAX® Corp. has developed the new EnduroMAX™ pump for its JetMachining® centers. The pump runs at 55,000 PSI for 1,000 hours between required pump rebuilds, the company reports. It also can run continuously at 60,000 PSI. The pump operates at 85 percent efficiency. It uses...

Continue Reading

Abrasive waterjet machine's traction drive system designed to handle abrasive environment

October 18, 2010

OMAX® Corp. offers the MAXIEM® 0707 abrasive waterjet system. It is equipped with a 30-HP, high-pressure, direct-drive, 50,000-PSI pump and Intelli-MAX® software. The machine also integrates a patent-pending X- and Y-axis traction drive system designed to handle an abrasive environment, as well...

Continue Reading

Abrasive waterjet line expanded - TheFabricator.com

Abrasive waterjet line expanded

September 7, 2010

OMAX® Corp. has added the MAXIEM® 2040 and MAXIEM 0707 to its line of abrasive waterjet machines. The machines are made in the U.S., and all models incorporate 50,000-PSI, direct-drive pump technology. The pumps deliver more cutting power per kilowatt than intensifier-type pumps and are...

Continue Reading

Waterjet cutting system pump rated at 94,000 PSI

August 30, 2010

Flow Intl. offers the Mach 4 system, which combines the company's HyperJet® pump and Dynamic Waterjet XD high-precision flat-stock and 3-D cutting technology. The pump, rated at 94,000 PSI, delivers continuous operating pressure at 87,000 PSI. Dynamic Waterjet eliminates stream lag and taper...

Continue Reading

Five-axis waterjet cutting machine introduced

August 17, 2010

Jet Edge Inc. has introduced the Idro line five-axis precision waterjet cutting machine. Capable of cutting almost any material, it is available in three sizes: 5.5 by 6.5 ft. nominal, 5.5 by 13 ft. nominal, and 6.5 by 13 ft. nominal. The machine features the IKC five-axis waterjet cutting head...

Continue Reading

Waterjet intensifier pumps available in sizes from 30 to 200 HP - TheFabricator

Waterjet intensifier pumps available in sizes from 30 to 200 HP

July 12, 2010

Jet Edge Inc. has released a brochure highlighting its precision waterjet intensifier pumps in sizes from 30 to 200 HP. The pumps can produce pressures from 60,000 to 90,000 PSI and flow rates of 0.65...

Continue Reading

System quickly removes spent waterjet abrasive - TheFabricator

System quickly removes spent waterjet abrasive

June 28, 2010

Barton Mines Co. offers the Barton Abrasive Removal Tool (BART), a portable abrasive removal system for the waterjet industry. The system achieves removal rates of more than 2,000 lbs./hour. Powered...

Continue Reading

Five-axis cutting head introduced - TheFabricator

Five-axis cutting head introduced

June 7, 2010

TECHNI Waterjet™ has released the PAC 60™ (Precision Angle Control) five-axis cutting head. The machine is capable of a true angle up to ± 60 degrees with continuous rotation.

Continue Reading

Waterjet pump has redundant intensifier system - TheFabricator

Waterjet pump has redundant intensifier system

June 7, 2010

Jet Edge's iP60-50R waterjet pump has two intensifier systems. If one of the intensifier systems fails or requires service, the second intensifier system can continue operations until the intensifier...

Continue Reading

Waterjet cutting system designed for distortion-free contour cutting - TheFabricator

Waterjet cutting system designed for distortion-free contour cutting

June 1, 2010

Knuth Machine Tools USA offers the Hydro-Jet Eco 0615 S waterjet cutting system. According to the company, the compact system provides distortion-free contour cutting on almost any type of material,...

Continue Reading

Digitizing waterjet allows reverse engineering

February 9, 2010

WARDJet offers a waterjet system with a digitizing capability, allowing reverse engineering of physical parts that have no drawings or electron files. Large parts can be laid on the waterjet table,...

Continue Reading

Pressure valve runs multiple waterjets

January 12, 2010

Jet Edge's patented Dual Pressure Valve® helps increase waterjet cutting productivity by allowing waterjet operators to control water pressure independent of the waterjet pump.With the remotely...

Continue Reading

Integrated diamond cutting head introduced

December 3, 2009

Barton Mines Company, a supplier of waterjet abrasives and waterjet replacement parts, has introduced the TRIDENT2 integrated diamond cutting head.The TRIDENT2 combines all the advantages of an...

Continue Reading

Lower-end waterjet cutting machine features high-end components

November 10, 2009

Flow Intl. Corp. has introduced the Mach 2 series waterjet cutting machines. The line comprises economical machines for those new to waterjet or on a limited budget, the manufacturer states. Featuring...

Continue Reading

Articulated waterjet cutting head allows nozzle tilting of 0 to 60 degrees from vertical position

October 13, 2009

OMAX® has introduced the new A-Jet™ articulated jet cutting head. It cuts accurate beveled edges at angles determined by the machine operator or part program.Controlled by the company's...

Continue Reading