Roll Forming News

Successful roll forming requires more than a roll forming line and tooling. Robust finite element analysis software, and understanding the material's yield strength and elasticity, are critical. This technology area is full of information on equipment, tooling, and simulation software.

Filter Content

Bradbury announces sales team leader

June 12, 2007

The Bradbury Co. Inc., Moundridge, Kan., has promoted Matt Werner to sales team leader for the Hayes International product line in the U.S. and for Bradbury Trim Shop equipment. He assists customers with equipment selection and system design. Werner joined the Bradbury inside sales staff in 2004...

Continue Reading

Roll-Kraft installs machinery

February 13, 2007

Roll-Kraft has installed additional CNCs at its headquarters facility in Mentor, Ohio. The addition brings the facility's capacity to 36 CNC machines.The company operates other facilities in Frankfurt, Ill., and Brampton,...

Continue Reading

Roll-Kraft adds to sales staff

November 7, 2006

Roll-Kraft, Mentor, Ohio, has added Jim Cahill to its sales team.Cahill focuses on the Canadian market and works with Roll-Kraft Ltd., Brampton, Ont. He joins the company from Titan Steel Corp., Baltimore, where he was an account manager. He also worked at Olympic Steel, Cleveland; MacSteel Intl.,...

Continue Reading

Roll-Kraft receives safety awards

October 10, 2006

Roll-Kraft, Mentor, Ohio, received two awards for safety from the Lake County Safety Council. One award was for reducing the annual incident rate by 25 percent or more over the previous year. The other award was for operating without an injury requiring lost time from work during 2005.Quarterly...

Continue Reading

Roll-Kraft Ltd. installs CNC machine

September 12, 2006

Roll-Kraft, Mentor, Ohio, has installed a vertical CNC machine at Roll-Kraft Ltd., Brampton, Ont., for additional production of tooling for the tube and pipe industry.The machine is the eighth CNC model at the facility. Its role is to manufacture large roll tooling with a diameter up to 49 in. The...

Continue Reading

Elrae receives OSHA's SHARP recognition

August 8, 2006

Elrae Industries Inc., Alden, N.Y., was awarded a national Safety and Health Achievement Recognition Program (SHARP) honor by OSHA.SHARP recognizes small businesses that operate an exemplary safety and health management system. The recognition singles out award recipients among its business peers...

Continue Reading

Roll-Kraft completes seminars

August 8, 2006

Roll-Kraft, Mentor, Ohio, recently completed a series of seminars for manufacturers of tube and pipe and roll forming equipment.In addition to regional seminars held in Los Angeles, the company offers the option to hold seminars in a company's facilities for its own employees. This instruction is...

Continue Reading

Hayes adds to sales team

August 8, 2006

Hayes Intl., Rotorua, New Zealand, a member of The Bradbury Group of companies, has added Sean Wiebe to its U.S. sales team. Wiebe is based at the company's facility in Moundridge, Kan., and assists customers with equipment selection and system design.Hayes Intl. produces coil handling, roll...

Continue Reading

Universal Tube & Rollform completes roll form line

August 8, 2006

Universal Tube & Rollform Equipment Corp., Perrysburg, Ohio, in cooperation with Universal Controls Group, has completed a roll form line for the Batesville Casket Co.The line comprises a Tishken 25-ton prepunch with feeder, a Tishken MW2 roll former, and a Tishken cutoff with a U-Trak length...

Continue Reading

Addison Machine adds to engineering department

August 8, 2006

Addison Machine Engineering, Reedsburg, Wis., has added Courtney Fassel and Tom Onate to its engineering department.The addition of Fassel increases the department's drafting capacity, while Onate brings many years of experience in roll tooling...

Continue Reading

Roll-Kraft adds to staff

July 11, 2006

Roll-Kraft, Mentor, Ohio, has added several personnel in a variety of positions.Joe Korzen and Jarred Esborn have been added to the engineering staff. Other new hires are Kevin Myers, John Dowler, and Stephan Betts as machinists; Tom Turk as polisher; and Scott Bickel as equipment assembler. The...

Continue Reading

Orbitform names Northwick Associates as European distributor

July 11, 2006

Orbitform Group, Jackson, Mich., has named Northwick Associates, Worcestershire, U.K., as European distributor for the company's products, including orbital forming machines, Adtech and Milford impact riveting machines, rollforming machines, Arbor Automation conveyors, and Marathon welding...

Continue Reading

Hess Industries appoints president, CEO

June 1, 2006

Hess Industries Inc. has announced the appointment of David Zenger as president and CEO for all operations and business activities worldwide. The announcement, made by Justin Hillenbrand, chairman of Hess Industries Inc., unites all Hess subsidiaries, Hess Engineering Inc., Capitol Technologies...

Continue Reading

FKM moves North American headquarters

May 9, 2006

FKM-USA, the North American division of FKM-Walzentechnik, Duisburg, Germany, has relocated its North American headquarters to Frankfort, Ill.The new facility has 3,000 sq. ft. of office space and 30,000 sq. ft. of manufacturing space. There are three manufacturing bays, each equipped with a...

Continue Reading

Macsteel Service Centers USA announces expansion

April 17, 2006

Macsteel Service Centers USA Inc., owned by the global steel company Macsteel Holdings of South Africa, has announced that it is constructing a $10 million metals manufacturing and distribution facility in Tucson, Ariz. The company plans to hire 25 employees within the next few years, with possible...

Continue Reading