Finishing Products

The finishing technology area has information on blast cleaning machines, cleaning and degreasing machines, deburring machines, drying systems, grinders, ovens, polishing and sanding machines, painting equipment, powder coating equipment, and vibratory finishing machines.

Filter Content

Stainless steel surface treatment kit introduced

April 10, 2015

Suhner offers the Inox-Kit for the removal of contaminants such as aggressive deposits and flash rust from stainless steel. The company recommends two steps for effective surface treatment. First is to use the Sun-Clean deep cleaner to remove rust and deposits from the pores. It is not a...

Continue Reading

Black oxide, zinc phosphate coatings produced on same process line

April 8, 2015

Birchwood Technologies offers a dual-process line that produces a black oxide finish using the TRU TEMP® low-temperature process and a zinc phosphate finish using the MICROLOK® MZN process on the same system. Comprising 10 tanks with 100-gal. capacity, the line incorporates a Near-Zero™...

Continue Reading

Coating resists high heat

March 30, 2015

Cortec® Corp. has introduced VpCI®-386 HT Black, a high-heat-resistant, water-based acrylic silicone primer/topcoat that provides protection in harsh, unsheltered outdoor applications. The primer can be applied to areas that are cracked and corroded to protect the equipment and prevent any...

Continue Reading

Powder coating meets AAMA 2604 specifications

March 26, 2015

TCI Powder Coatings has introduced the TruAnodize line of powder coatings, which meet AAMA 2604 specifications. As part of the TruDurance architectural coatings product line, these powder coatings are designed for architectural applications that require an anodized look. The smooth, low-gloss...

Continue Reading

Rotary table wet blasting system offered

March 24, 2015

Guyson Corp. has introduced a rotary table wet blast system with manual and semiautomatic modes of operation. The model SS-10 SA is designed to use abrasive or bead-type media for dustless blast cleaning, descaling, surface preparation, and cosmetic finishing of components that might be too damp or...

Continue Reading

Pass-through industrial washer has adjustable belt flow from 2 to 20 FPM

March 19, 2015

Viking Blast & Wash Systems has released the CBW 2412H industrial washer. It has a 24- by 12-in. wash zone on a chain-mesh belt conveyor. The redesigned unit is made for standard manufacturing applications. Belt flow speeds are adjustable from 2 to 20 FPM on a continuous pass-through basis. The...

Continue Reading

Powder coating formulated with cross-link polymer

March 17, 2015

PPG Industries offers ENVIROCRON® HTE (high transfer efficiency) powder coating. The BPA-free coating is engineered for appliance, architectural, wire goods, and extrusion applications. Formulated with a cross-link polymer, the coating offers faster application build rates, less material waste,...

Continue Reading

Vertical oven saves space on factory floor

March 13, 2015

Davron Technologies Inc. has designed and manufactured the DTI-1135, an electrically heated vertical oven used to cure a coating on steel components for a Tier 1 automotive supplier. The vertical oven features one heated zone where parts index up and down in a vertical orientation. After...

Continue Reading

Nonwoven abrasive wheels, brushes designed for steel, brass, aluminum

March 11, 2015

Osborn has introduced a new line of JacksonLea® brand nonwoven abrasive wheels and brushes. The heavy-duty, nonwoven abrasive cleans, finishes, and polishes such materials as steel, brass, and aluminum. The line includes soft-density, medium-grit, silicon-carbide convolute surface finishing...

Continue Reading

Parts cleaning/collection unit handles larger parts

March 10, 2015

Custom Service Solutions Inc. has introduced the 12-in. MiJET™ parts cleaning and collection unit. It offers a larger-diameter opening than the original 8-in. model, allowing users to clean larger parts. Using one existing shop air line at a CNC machine, the pneumatically driven unit cleans...

Continue Reading

Blade designed for blast machine processing of narrow workpieces

March 6, 2015

Wheelabrator has introduced a concave blade for its 35 Ezefit blast wheel, which achieves a narrow blast pattern and a tight “hot spot” at high abrasive speeds. The blade design is suitable for blast machines processing narrow workpieces, such as wire, rod, tube, pipe, bar, and...

Continue Reading

CNC grinder equipped with software to allow full 3-D simulation

March 3, 2015

Schütte has introduced the 325linear machine, a 5-axis CNC grinder with extended X- and Y-axis movement plus two auxiliary slides for workpiece clamping and improved grinding wheel guidance over the entire machining envelope. Microtools, gun drills, hob cutters, and complex geometries can be...

Continue Reading

Powder coating’s polyester formulation enables uniform film builds on complex parts, surfaces

March 3, 2015

PPG Industries’ industrial coatings business has introduced ENVIROCRON® HTE (high-transfer-efficiency) powder coating, featuring a proprietary bisphenol A (BPA)-free polyester formulation that offers a fast application build rate while providing uniform coverage on complex parts and surfaces and...

Continue Reading

CNC grinding machine offers compact design

February 26, 2015

Okuma’s GI-10NII grinding machine is equipped with extremely rigid, high-speed grinding wheel spindles for automated production environments. Capable of simultaneous 2-axis control, the machine can handle a variety of workpiece shapes in a simple data setting. Centralized control of...

Continue Reading

Abrasive products offered in several styles

February 18, 2015

Better Tools offers coated abrasive belts, surface conditioning belts, flap discs, flap wheels, and flap brushes. The company reports that in most cases it can supply samples and full production quantities...

Continue Reading