Plasma Cutting Products

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content

Plasma torch height control has two torch stations

September 9, 2009

ITT Corp., through its wholly-owned subsidiary Cleveland Motion Controls Inc., has announced the release of the SmartHC Plasma Torch Height Control. The control is fully integrated with the Burny...

Continue Reading

Plasma beveling head designed for high-speed precision motion

September 9, 2009

AKS Cutting systems has introduced a plasma beveling head with rigid construction that is designed to produce high-speed precision motion.The beveling head, which can bevel small holes, has a torch...

Continue Reading

Plasma machine cuts, marks with same torch

September 9, 2009

ESAB Cutting Systems' Acer DX High Speed Precision Cutting Machine is designed to provide high-speed, high-precision plasma cutting for any size fabrication shop. With a compact footprint and simple...

Continue Reading

Plasma consumables suitable for use at high cutting current for long contour and bevel cuts

August 11, 2009

Kjellberg Finsterwalde has developed YellowXLife™ plasma consumables. According to the company, the consumables last 3.5 times longer than previous models. They are designed for use with the...

Continue Reading

Plasma cutting system processes all AISC structural shapes

June 9, 2009

Peddinghaus Corp. has introduced a new thermal processing technology called Ring of Fire. It has the capacity to process all AISC structural shapes, including beams, columns, angle iron, channel iron,...

Continue Reading

Manual plasma cutting inverters suitable for cutting all electrically conductive materials

May 12, 2009

Kjellberg Finsterwalde has introduced a new series of manual plasma cutting machines. Models CUTi 40, CUTi 70, CUTi 90, and CUTi 120 are suitable for cutting all electrically conductive materials....

Continue Reading

90-degree manual plasma cutting torch released

March 10, 2009

Thermal Dynamics has announced the release of the 90-degree 1Torch. It uses the same 30 consumables as the 75-degree model to cover the spectrum of manual plasma cutting and gouging from 20 amps...

Continue Reading

Plasma cutting, gouging system designed for both hand-held, mechanized applications

December 16, 2008

Hypertherm has introduced the Powermax45®, a portable, 1/2-in. plasma cutting and gouging system. The single-gas system (air and nitrogen) is designed for both hand-held and mechanized...

Continue Reading

Replacement parts designed for Kaliburn Proline plasma torches

November 11, 2008

The American Torch Tip Co. offers replacement parts for use on the Kaliburn Proline 2200 and 2600 plasma torches.The parts are manufactured in the company's Bradenton, Fla., facility. The emphasis has...

Continue Reading

275-amp plasma cutting consumables introduced

August 12, 2008

Hypertherm's Centricut brand has announced the availability of 275-amp consumables for InnerLogic (Kaliburn) ProLine 2260 and FineLine 260 systems.The new consumable line includes the company's...

Continue Reading

Manual plasma cutting line expanded

August 12, 2008

ESAB Welding & Cutting Products has launched two new models in its PowerCut™ line of Plasmarc™ manual cutting packages. The lightweight, portable 1600 and 1300 models offer the highest...

Continue Reading

Plasma cutting system suitable for HVACR applications

July 15, 2008

Thermal Dynamics has introduced the AirCut 15C manual plasma cutting system, which is suitable for HVACR applications.The 29-lb. system, which has a built-in air compressor, cuts up to 3/16 in. with a...

Continue Reading

Replacement bodies designed for Powermax— torches

July 15, 2008

Thermacut Inc. has introduced a line of replacement parts for Hypertherm® Powermax® T-60® and T-80® hand torch bodies; 25- and 50-ft. lead sets; and torch with leads assemblies. The...

Continue Reading

Uniframe plasma cutting system has compact footprint

June 17, 2008

AKS Cutting Systems has introduced the tru-kut heavy-duty, 5-ft. by 10-ft. plasma cutting system. The rigid, fully welded steel frame provides a stable platform, the company reports.Single setup...

Continue Reading

Plasma cutting machine suitable for HVAC, small shops

March 11, 2008

3D Mfg. Inc.'s Razor Cut EL plasma cutting machine has a welded tubular frame and linear-motion rails—which are driven by a servo positioning system—on the X, Y, and Z axes.The system has...

Continue Reading