Waterjet Cutting Products

Filter Content

Five-axis waterjet cutting machine introduced

August 17, 2010

Jet Edge Inc. has introduced the Idro line five-axis precision waterjet cutting machine. Capable of cutting almost any material, it is available in three sizes: 5.5 by 6.5 ft. nominal, 5.5 by 13 ft. nominal, and 6.5 by 13 ft. nominal. The machine features the IKC five-axis waterjet cutting head...

Continue Reading

Waterjet intensifier pumps available in sizes from 30 to 200 HP - TheFabricator

Waterjet intensifier pumps available in sizes from 30 to 200 HP

July 12, 2010

Jet Edge Inc. has released a brochure highlighting its precision waterjet intensifier pumps in sizes from 30 to 200 HP. The pumps can produce pressures from 60,000 to 90,000 PSI and flow rates of 0.65 to 4 GPM for waterjet cutting and surface preparation applications. The intensifier pumps...

Continue Reading

System quickly removes spent waterjet abrasive - TheFabricator

System quickly removes spent waterjet abrasive

June 28, 2010

Barton Mines Co. offers the Barton Abrasive Removal Tool (BART), a portable abrasive removal system for the waterjet industry. The system achieves removal rates of more than 2,000 lbs./hour. Powered by a common pressure washer, the stainless steel wand is designed to fit between the table slats...

Continue Reading

Five-axis cutting head introduced - TheFabricator

Five-axis cutting head introduced

June 7, 2010

TECHNI Waterjet™ has released the PAC 60™ (Precision Angle Control) five-axis cutting head. The machine is capable of a true angle up to ± 60 degrees with continuous...

Continue Reading

Waterjet pump has redundant intensifier system - TheFabricator

Waterjet pump has redundant intensifier system

June 7, 2010

Jet Edge's iP60-50R waterjet pump has two intensifier systems. If one of the intensifier systems fails or requires service, the second intensifier system can continue operations until the intensifier pump can be shut down for service. The pump produces 1.1 GPM of ultrahigh-pressure water for...

Continue Reading

Waterjet cutting system designed for distortion-free contour cutting - TheFabricator

Waterjet cutting system designed for distortion-free contour cutting

June 1, 2010

Knuth Machine Tools USA offers the Hydro-Jet Eco 0615 S waterjet cutting system. According to the company, the compact system provides distortion-free contour cutting on almost any type of material, including coated and uncoated metals, aluminum, copper, and stainless steel. Equipped with a...

Continue Reading

Digitizing waterjet allows reverse engineering

February 9, 2010

WARDJet offers a waterjet system with a digitizing capability, allowing reverse engineering of physical parts that have no drawings or electron files. Large parts can be laid on the waterjet table, and the waterjet memorizes the part profile. With the X series controller, the waterjet cutting head...

Continue Reading

Pressure valve runs multiple waterjets

January 12, 2010

Jet Edge's patented Dual Pressure Valve® helps increase waterjet cutting productivity by allowing waterjet operators to control water pressure independent of the waterjet pump.With the remotely mounted valve, waterjet operators can run multiple waterjet tables simultaneously at various...

Continue Reading

Integrated diamond cutting head introduced

December 3, 2009

Barton Mines Company, a supplier of waterjet abrasives and waterjet replacement parts, has introduced the TRIDENT2 integrated diamond cutting head.The TRIDENT2 combines all the advantages of an integrated diamond design with the versatility of a replaceable orifice.According to the company,...

Continue Reading

Lower-end waterjet cutting machine features high-end components

November 10, 2009

Flow Intl. Corp. has introduced the Mach 2 series waterjet cutting machines. The line comprises economical machines for those new to waterjet or on a limited budget, the manufacturer states. Featuring a high-pressure pump, software, and abrasive cutting head found on the company's high-end systems,...

Continue Reading

Articulated waterjet cutting head allows nozzle tilting of 0 to 60 degrees from vertical position

October 13, 2009

OMAX® has introduced the new A-Jet™ articulated jet cutting head. It cuts accurate beveled edges at angles determined by the machine operator or part program.Controlled by the company's proprietary Intelli-MAX® software, the cutting head adds two motion axes that allow tilting the...

Continue Reading

Machine combines wire EDM, waterjet technologies

September 24, 2009

Mitsubishi's MD+CELL combines the MD+PROII wire EDM with a Suprema DX44 waterjet for high speed and precision in one automated unit. The machine is designed to minimize operator intervention and maximize unattended run time for piece-part manufacturers.The MD+CELL uses a Mitsubishi MELFA six-axis...

Continue Reading

Single-intensifier waterjet pump introduced

September 9, 2009

JetEdge Inc., a manufacturer of ultra-high pressure waterjets, has introduced the iP60-100S 100 HP, 60,000 PSI (4,100 bar) waterjet pump. The iP60-100S is a single intensifier version of the company's 100 HP waterjet pump.The pump produces 2.0 GPM (7.6 LPM) of ultra-high-pressure water for cutting,...

Continue Reading

Waterjet system for high-precision machining introduced

August 11, 2009

MC Machinery Systems Inc. has introduced the DX series waterjet machine. Its 700 series CNC delivers advanced programming capabilities for high-precision machining. The unit is controlled on a 15-in., waterproof screen, with improved graphics and NC design to simplify operation.The 22-in. machine...

Continue Reading

Pneumatic grate cleaning tool works in push or pull mode

July 14, 2009

Bystronic offers a pneumatic tool for cleaning cutting table grates. The reduction of back spatter helps keep cut parts cleaner, helping to reduce secondary operations and increase overall process reliability.The unit requires only one operator and is designed to work in push or pull...

Continue Reading