Laser Cutting Products

The laser cutting technology area has information on 2-D and 3-D cutting machines, optics, resonators, cutting gases, and automated material handling systems. In addition to conventional CO2 systems, it has information on solid-state fiber and disk lasers.

Filter Content
Fiber laser system designed for sheet metal cutting - TheFabricator.com

Fiber laser system designed for sheet metal cutting

February 22, 2012

The new PLATINO® fiber laser from Prima Power is a flexible laser cutting machine designed for sheet metal processing. Supplying laser power from 2,000 to 3,000 W, the machine handles a sheet size of 59.06 by 118.11 in. The working area is accessible from three sides. This open structure...

Continue Reading

Fiber laser systems designed for applications including marking and fine-feature cutting

February 7, 2012

Hypertherm has released two new HyIntensity fiber laser systems — the 2-kW HFL020 and the 1-kW HFL010 — designed specifically for cutting applications, including marking and fine-feature cutting on thicknesses from gauge to plate. The machines cut a variety of materials, including brass and...

Continue Reading

Fiber-guided, solid-state laser cuts construction steel, stainless steel, aluminum, and nonferrous metals - TheFabricator.com

Fiber-guided, solid-state laser cuts construction steel, stainless steel, aluminum, and nonferrous metals

December 6, 2011

TRUMPF Inc.'s TruLaser 5030 fiber, with a TruDisk fiber-guided solid-state laser, is designed for cutting parts out of thin sheet material at high speeds. In fusion cutting of stainless steel up to 0.16 in. thick, the fiber achieves feed rates up to three times faster than the CO2 version,...

Continue Reading

Laser cutting system processes mild steel up to 1 in. thick - TheFabricator.com

Laser cutting system processes mild steel up to 1 in. thick

November 10, 2011

The Optiplex 3015 2-D laser cutting system is available from Mazak Optonics. The system features a flexible, two-pallet changer that provides high throughput and AO/5 automated setup technologies. The machine processes mild steel up to 1 in. thick. It features the PreView II touchscreen control...

Continue Reading

Replacement CO2 laser optics designed to eliminate the need for beam centering upon installation

October 24, 2011

II-VI Infrared provides replacement cut lenses used in TRUMPF®'s latest-generation TruLaser single-cutting-head machines. The lenses feature a contoured flat on one edge that works with TRUMPF's LensLine monitoring system. The system monitors cut lens contamination and provides feedback to the...

Continue Reading

Laser cutting system designed for large-diameter, thick-walled tubes and nontubular open structural sections - TheFabricator.com

Laser cutting system designed for large-diameter, thick-walled tubes and nontubular open structural sections

October 3, 2011

BLM Group USA has introduced the LT Jumbo series automatic laser tube cutting system for large-diameter, thick-walled tubes. The system can be used to cut round, square, and rectangular tubes, as well as nontubular open structural sections in diameters from 3 to 20 in. and lengths up to 60 ft....

Continue Reading

Fiber-optic laser machine designed for tube and profile processing

September 26, 2011

Haven Mfg. Corp. offers the SOCO Machinery SLT-150 fiber-optic laser machine to the U.S. market. Designed for tube and profile processing, the laser cutting machine combines multiple machining processes in one system. The company manufactures tube cutting and processing equipment, including...

Continue Reading

Optics designed for multikilowatt steel cutting lasers - TheFabricator.com

Optics designed for multikilowatt steel cutting lasers

August 29, 2011

High-power CO2 laser optics from Laser Research Optics, optimized for 10.6 µm and offered in 1.5- to 2.5-in. diameters, are designed for multikilowatt steel cutting lasers. With focal lengths from 3.5 to 12 in., the lenses are A/R-coated and exhibit total absorption of less than 0.2...

Continue Reading

Laser cutter specifically designed, built around fiber-optic technology

August 23, 2011

Salvagnini America offers the new L3 fiber laser cutter, which the company says is the first laser cutter specifically designed and built around fiber-optic technology. Features include high speed, low energy consumption, low maintenance, low cost per part, increased accuracy and realiability, and...

Continue Reading

6,000 W 2-D laser cutting system processes thicker mild steel, stainless - TheFabricator.com

6,000-W 2-D laser cutting system processes thicker mild steel, stainless

August 9, 2011

Mazak Optonics Corp. has increased the power output of its SuperTurbo-X Mark III 2-D laser cutting system to 6,000 W for processing thicker mild steel and stainless materials. Built using the company's hybrid platform, the system has a constant-beam-length construction to provide uniform cutting...

Continue Reading

Rotary index configuration simplifies switch from flat sheet to tube, pipe cutting - TheFabricator.com

Rotary index configuration simplifies switch from flat sheet to tube, pipe cutting

August 1, 2011

Amada has added a rotary index to its FOM2 laser cutting system for cutting medium to thick materials. The rotary index is located on one of three interchangeable shuttle pallets, simplifying the switch from flat sheet cutting to tube or pipe cutting. The FOM2RI-3015 can process round, square,...

Continue Reading

Fiber laser tube cutting system processes galvanized steel and highly reflective materials - TheFabricator.com

Fiber laser tube cutting system processes galvanized steel and highly reflective materials

July 25, 2011

LT Fiber from BLM Group USA is the first automated laser tube cutting machine to use a fiber laser resonator, the company reports. With its 2-kW IPG fiber laser source, the system can process highly reflective materials such as brass, copper, and aluminum, as well as galvanized steel. The...

Continue Reading

500-W fiber laser suitable for cutting metals up to 0.12 in. thick

June 27, 2011

JK Lasers, part of the GSI Group, has added the JK500FL to its range of fiber lasers. With features including 500-W CW output power, single-mode beam quality, and patented back reflection protection, the fiber laser can process a variety of materials with high accuracy and at a quick rate, the...

Continue Reading

Open-table CO2 laser machine allows position to be monitored, corrected as needed by the CNC - TheFabricator.com

Open-table CO2 laser machine allows position to be monitored, corrected as needed by the CNC

May 16, 2011

Bell Laser LLC offers the BL-C-4896-400 open-table, CNC laser machine. The rigid, precision-cutting machine features a ball-screw servomotor drive that serves as a closed-loop feedback system, allowing the position to be monitored and corrected as needed by the CNC. The welded steel frame...

Continue Reading

Laser system combines fiber technology with 12,000-IPM linear-motor axis drives

April 18, 2011

Cincinnati Incorporated has expanded its laser cutting product line with the CL-900 series fiber laser cutting system. It combines fiber laser technology with 12,000-IPM linear-motor axis drives to cut mild steel two to three times faster than conventional lasers, according to the manufacturer....

Continue Reading