Materials Handling Products

The material handling technology area encompasses systems and equipment for handling coil, sheet, plate, profiles, tube and pipe, raw materials, and scrap. It also covers peripheral accessories such as C-hooks, clamps, die storage systems, hoists, lifters, and sheet stackers and destackers.

Filter Content
On/off magnet bars introduced - TheFabricator.com

On/off magnet bars introduced

April 18, 2011

Bug-O Systems has introduced a new line of Bug-O/Magswitch on/off magnet bars, lifting magnets, and accessories. The compact magnet bars are available for use with the company's rail systems, as well as those from other...

Continue Reading

Feeder handles 0.050- to 0.125-in.-thick steel sheets from 20 to 44 in. wide, 60 to 70 in. long - TheFabricator.com

Feeder handles 0.050- to 0.125-in.-thick steel sheets from 20 to 44 in. wide, 60 to 70 in. long

April 5, 2011

The Union Tool Corp. has introduced the new Union Sheet Feeder, designed to destack, align, and feed steel sheets from 20 to 44 in. wide and 60 to 76 in. long with thicknesses of 0.050 to 0.125 in. The unit can feed up to five parts per minute and features a PLC with operator touchscreen...

Continue Reading

Self-propelled trailers introduced

March 29, 2011

The Wheelift Systems Group of Doerfer Companies has introduced its self-propelled trailers in capacities to 100 tons and more. The trailers are suitable for in-plant operation in congested, confined areas and narrow intersecting aisles. Features include remote control operation, low-profile...

Continue Reading

Rectangular vacuum cups designed for handling narrow, high-capacity loads with inadequate gripping areas - TheFabricator.com

Rectangular vacuum cups designed for handling narrow, high-capacity loads with inadequate gripping areas

February 17, 2011

Anver Corp. offers rectangular vacuum cups designed for handling narrow, high-capacity loads with inadequate surface areas for gripping. The vacuum cups feature NBR rubber bonded onto a machined aluminum hub and include an internal safety seal for a sure grip. Each cup is rated at up to 550...

Continue Reading

Sit-down lift trucks have capacities from 5,000 to 10,000 lbs.

December 13, 2010

Linde Material Handling-North America Corp., a wholly owned subsidiary of Linde Material Handling GmbH, has introduced the new RX60 series of electric counterbalanced sit-down lift trucks. The eight models in the series have capacities from 5,000 (RX60-25C and RX60-25L) to 10,000 (RX60-50) lbs....

Continue Reading

Vacuum lifter designed for lifting precision metal coils up to 4 ft. dia. - TheFabricator.com

Vacuum lifter designed for lifting precision metal coils up to 4 ft. dia.

December 6, 2010

The VPFL-4 air-powered, below-the-hook vacuum lifter, designed for lifting precision metal coils up to 4 ft. dia. from the skid to the winding machine, has been introduced by Anver Corp. The lifter has an X frame with adjustable suction pads and spring suspensions to accommodate and grip...

Continue Reading

Metal detector provides high-sensitivity metal separation - TheFabricator.com

Metal detector provides high-sensitivity metal separation

November 29, 2010

Eriez' compact E-Z Tec® 9100 metal detector provides high-sensitivity metal separation. It is used to detect and reject very small ferrous, nonferrous, and stainless steel materials. Features include balanced coil technology for sensitivity to all metals; an adjustable, air-powered reject...

Continue Reading

Belt conveyor designed for heavy-duty industrial and packaging applications - TheFabricator.com

Belt conveyor designed for heavy-duty industrial and packaging applications

November 29, 2010

Dorner offers the new 3200 series iDrive belt conveyor. The motor, gearbox, and motor controller are integrated within the frame of the conveyor, allowing it to fit in tight spaces. The conveyor, designed for heavy-duty industrial and packaging applications, comes with indexing capabilities and...

Continue Reading

Hydraulic leveler designed for leveling round parts - TheFabricator.com

Hydraulic leveler designed for leveling round parts

November 15, 2010

Arku has introduced the FlatMaster® 88 hydraulic parts leveler, designed for the leveling of round parts. Axially symmetric parts often have to be leveled twice with intermediate rotation by 90 degrees. The machine can level in both directions and is equipped with an automated turntable for...

Continue Reading

Stamping scrap conveyor meets space requirements for retrofit in-floor applications - TheFabricator.com

Stamping scrap conveyor meets space requirements for retrofit in-floor applications

October 18, 2010

Prab has released an offset trough design for its ScrapVeyor™ stamping scrap conveyor to meet the space requirements for retrofit in-floor applications. The offset design, as opposed to the traditional symmetrical V-style trough design, allows the conveyor to fit within tighter spaces....

Continue Reading

Workpiece return conveyors permit one-person operation at one-sided edgebanding machines - TheFabricator.com

Workpiece return conveyors permit one-person operation at one-sided edgebanding machines

October 11, 2010

Available from Stiles Machinery, LIGMATECH®'s two new workpiece return conveyors — ZHR 100 BOOMERANG® and ZHR 200 BOOMERANG — permit one-person operation at one-sided edgebanding machines. They are suitable for small to medium-sized companies looking to add productivity...

Continue Reading

Internal combustion forklift introduced

September 27, 2010

Crown Equipment has unveiled an internal combustion Crown C-5 series pneumatic-tire, industrial forklift for heavy-duty and outdoor applications. The class V forklift is equipped with an industrial John Deere Power Systems engine and a dual, open-core radiator that offers independent engine and...

Continue Reading

Bowtie conveyor designed to convey pipe, other cylindrically shaped products within small footprint

September 27, 2010

TKF Inc. offers custom bowtie conveyor systems designed to convey pipe and other cylindrically shaped products within a small footprint. Sometimes called a V roller, the trough shape of the roller allows the product to be conveyed while nearly eliminating the side-to-side movement associated with a...

Continue Reading

Vacuum lifter designed to lift heavy pipe from top and prevent surface damage - TheFabricator

Vacuum lifter designed to lift heavy pipe from top and prevent surface damage

August 10, 2010

A new compact, below-the-hook vacuum lifter for pipe handling has been introduced by Anver Corp. The VPFL series can be equipped with a custom pad attachment featuring a rugged foam pad mounted on a...

Continue Reading

Permanent magnets lift up to 10,000 lbs. of steel, iron

July 26, 2010

Eriez’ SafeHold® permanent lifting magnets allow manufacturers to lift, pile, and transfer up to 10,000 lbs. of steel and iron of any weight and shape without slings, hooks, or cables. The...

Continue Reading