- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
More from The Fabricator
- From The Fabricator
Quality Air Breathing System from Martech supplies air for two people at once
- Jan 29, 2018
- Safety
- Product Release
Martech Services Co.’s Quality Air Breathing System can help companies comply with the OSHA requirement for Grade D breathable air for painters, blasters, and welders. When placed near the point of use, the system works with the existing compressed air supply. The four-stage filtration filters...
- From The Fabricator
MVMGT Reflective Guardrail Bolts moves to new location in West Virginia
- Jan 29, 2018
- Shop Management
- News Release
MVMGT Reflective Guardrail Bolts LLC, a subsidiary of MVM Green Technologies Inc., has announced plans to move to a new location in Princeton, W.V. It intends to manufacture low-profile, reflective guardrail bolts. A ribbon-cutting ceremony is scheduled for Feb. 5, and operations will begin by...
- From The Fabricator
Georgia Manufacturing Alliance launches Middle Georgia Chapter
- Jan 29, 2018
- Shop Management
- News Release
The Georgia Manufacturing Alliance (GMA), Macon, Ga., is launching a new chapter in the central region. The kickoff meeting on Jan. 30 will include a Networking Lunch & Learn at the Middle Georgia Regional Commission, followed by a plant tour of Erdrich USA in Dublin, Ga. “The GMA Middle Georgia...
- From The Fabricator
AAM and Drexler partner to provide electronic differential
- Jan 29, 2018
- Shop Management
- News Release
Detroit-based American Axle & Mfg. Inc. and Drexler Automotive GmbH, a manufacturer of high-performance limited slip differentials, racing transmissions, drive shafts, and wheel hub systems, have entered into an agreement to expand their relationship, integrating electromechanical limited slip...
- From The Fabricator
Dawn Equipment announces new Underground Agriculture company
- Jan 29, 2018
- Shop Management
- News Release
Dawn Equipment, a manufacturer of farm equipment and accessories in Sycamore, Ill., has announced the launch of a new company called Underground Agriculture.
The new company manufactures agricultural equipment for farmers employing organic, no-till methods.
- From The Fabricator
Solar Atmospheres of California completes facility expansion
- Jan 29, 2018
- Shop Management
- News Release
Solar Atmospheres of California (SCA) has completed the expansion of its facility in Fontana, Calif. With the 25,000-sq.-ft. building, the company has doubled its heat-treating capacity on the West Coast. The company has added four vacuum furnaces from sister company Solar Mfg. in Souderton, Pa.,...
- From The Fabricator
SigmaTEK names marketing coordinator
- Jan 29, 2018
- Shop Management
- News Release
SigmaTEK Systems LLC, Cincinnati, has named Catherine Burns as the marketing coordinator.
Burns received her bachelor’s degree in strategic marketing management from Liberty University in 2017. She previously worked in the company’s finance department.
- From The Fabricator
Large-format dispensing system offered
- Jan 29, 2018
- Shop Management
- Product Release
The RD 2500 large-format dispensing table from Dispense Works Inc. combines a workbench with a built-in, precision, overhead servo XYZ gantry system. It is accessible from the front, sides, and top, requiring less operator reach to the center of the table. The T-slot table base plate has 25...
- From The Welder
Consumables Corner: Heat input and its effects on material properties
- By Nino Mascalco, Rob Koltz, and Steve Sigler
- Jan 29, 2018
- Consumables
- Article
Columnists Nina Mascalco, Rob Koltz, and Steve Sigler dive into the world of heat input.
- From The Welder
Aluminum Workshop: Two flowmeters don’t make a right
- By Frank Armao
- Jan 26, 2018
- Aluminum Welding
- Article
Frank Armao rings in the new year by cautioning welders about a poor practice that is fairly commonplace.
- From The Fabricator
Dillon line card shows workholding products
- Jan 26, 2018
- Machining
- Product Release
Dillon Mfg. has published a two-page line card that gives an overview of its line of workholding products. Among the products detailed are hard and soft chuck jaws, full grip pie jaws, collet pads and collet pad jaws, and vise jaws. Standard products are available in materials, sizes, and...
- From The Fabricator
Goudsmit Magnetics power gripper handles heavy steel parts
- Jan 26, 2018
- Materials Handling
- Product Release
Goudsmit Magnetics has introduced a magnetic power gripper. It serves as a lifting magnet for picking up or gripping heavy ferromagnetic parts, such as solid steel beams, grilles, plates, and milled parts. In addition, the compact neodymium magnet is suitable for use as a handling magnet in robotic...
- From The Fabricator
Staufen and Schuler partner to provide consulting for North American press shops
- Jan 26, 2018
- Bending and Forming
- News Release
Germany-based Staufen and Schuler, Canton, Mich., have announced they are offering their combined services to provide consulting services and process optimization for press shops in North America. Process improvement experts from both companies analyze press shop processes and identify and address...
- From The Fabricator
Steel executive to keynote FMA Annual Meeting
- Jan 26, 2018
- Shop Management
- News Release
Ladd Hall, executive vice president of flat-rolled products for Nucor Corp., will give a keynote presentation, "Successfully Navigating an Unpredictable Steel Market," on Thursday, March 8, at the Fabricators & Manufacturers Association Intl.’s (FMA’s) 2018 Annual Meeting. His presentation will...
- From The Fabricator
Phillips Corp. sells Haeger Insertion Machine division to PennEngineering
- Jan 26, 2018
- Assembly and Joining
- News Release
Phillips Corp., a Hanover, Md.-based supplier of manufacturing technology products and services focused on CNC machine tools and additive manufacturing, has sold its Haeger Insertion Machine division, based in Oakdale, Calif., to fastening equipment manufacturer PennEngineering, Danboro, Pa....
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
AI, machine learning, and the future of metal fabrication
Employee ownership: The best way to ensure engagement
Steel industry reacts to Nucor’s new weekly published HRC price
How to set a press brake backgauge manually
Los operadores de prensa dobladora inexpertos hacen indispensable el repensar la seguridad
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1