Testing and Measuring

Whether you need to measure dimensions or perform some sort of flaw detection on sheet, tube, or pipe, you'll find what you need in this technology area. It discusses measuring coordinates, diameters, and hardnesses; flaw detection using eddy current, ultrasonic, radiographic, and X-ray systems; and using a few other equipment types, such as vision systems and material composition analyzers.

Filter Content
Hands-free UV-A LED light source suitable for yoke inspection - TheFabricator.com

Hands-free UV-A LED light source suitable for yoke inspection

July 22, 2013

Spectronics Corp. has introduced the EK-3000 EagleEye™ UV-A/white light LED inspection kit for magnetic particle inspection. It enables NDT inspectors to detect fluorescent flaws in ferrous materials. This portable kit features a compact, battery-operated inspection lamp. It has two...

Continue Reading

ASME certification

Building your first ASME code vessel, start to finish

July 16, 2013

By:

Taking your shop to the next level might involve ASME certification. Just what does this entail? It begins with an agency.

Continue Reading

Portable flaw detector introduced - TheFabricator.com

Portable flaw detector introduced

July 10, 2013

Olympus has introduced the OmniScan® SX flaw detector for linear zero-degree inspections, such as corrosion mapping and composite inspection, as well as weld inspection using one phased-array group or one time-of-flight diffraction (TOFD) channel. Two models are available: the SX PA and SX...

Continue Reading

Borescopes extendible for tube, pipe inspections - TheFabricator.com

Borescopes extendible for tube, pipe inspections

July 10, 2013

Lenox Instrument Co. offers sectional, extendible, modular borescopes for tube and pipe inspections. Users can add extender sections to provide long working lengths up to 120 ft. The borescopes, available in diameters of 0.91, 1.38, 1.77, and 2.76 in., allow identification of flaws as small as...

Continue Reading

Unit performs photogrammetry, 3-D scanning automatically

June 26, 2013

The ATOS Plus from Capture 3D integrates photogrammetry, 3-D scanning, and inspection to provide dimensional analysis and verification. It eliminates the need for precise fixtures, streamlining the measurement process while decreasing overall project time, the company states. The unit is available...

Continue Reading

Flaw detection system uses guided-wave technology - TheFabricator.com

Flaw detection system uses guided-wave technology

June 20, 2013

Olympus has introduced the UltraWave™ LRT, a flaw detection system that uses guided-wave technology to perform long-range inspections on pipes and pipelines. The NDT technique inspects and localizes areas of potential degradation, such as corrosion and metal loss. The technology is based...

Continue Reading

Metrology software includes 40 updates

June 20, 2013

Hexagon Metrology has launched PC-DMIS 2013 metrology software. It focuses on the collection, evaluation, management, and presentation of manufacturing data to help reduce scrap, improve throughput, and build lean manufacturing operations. The new Width Construction feature facilitates the...

Continue Reading

Laboratory Testing adds customer service supervisor - TheFabricator.com

Laboratory Testing adds customer service supervisor

June 20, 2013

Laboratory Testing Inc. (LTI), Hatfield, Pa., has hired Brad McVaugh as its customer service supervisor. He is responsible for providing customer support services and monitoring all operations in the department, which prepares quotes; provides information about material testing, calibration, and...

Continue Reading

Laboratory Testing names assistant manager, chemistry and metallography - TheFabricator.com

Laboratory Testing names assistant manager, chemistry and metallography

June 19, 2013

Laboratory Testing Inc., Hatfield, Pa., has promoted Marion Crooks to assistant manager of chemistry and metallography. The department performs instrumental and wet chemistry, corrosion testing, microscopic and macroscopic examination, microhardness testing, SEM/EDS analysis, RoHS testing, and...

Continue Reading

Flange, base plate scale fits in combination square for multiple measurements - TheFabricator.com

Flange, base plate scale fits in combination square for multiple measurements

June 12, 2013

J & B Specialty Tool Inc. offers a new scale for laying out the holes on steel beam flanges and base plates. It temporarily replaces the scale in an existing combination square, according to the manufacturer. Rather than using as many as four other tools and having to readjust the...

Continue Reading

Laboratory Testing Inc. announces two promotions

June 10, 2013

Laboratory Testing Inc., a provider of tensile, impact, hardness, fracture toughness, and stress rupture testing in Hatfield, Pa., has announced the promotions of Glenn Derstine to senior technical adviser for mechanical testing and machining and Brandon McVaugh to destructive testing manager for...

Continue Reading

Baosteel orders Shapeline flatness system

June 10, 2013

Baosteel has placed an order for a flatness measurement system from Shapeline, Linköping, Sweden, to be installed at the high-strength steel plate mill at Baoshan Iron & Steel Co., Shanghai. The laser-based flatness system is designed to measure up to 6.56-ft.-wide plates online with high...

Continue Reading

Coord3 marks 40 years in business

June 3, 2013

Torino, Italy-based Coord3, with a U.S. location in Wixom, Mich., recently celebrated 40 years in business with a two-day program of activities for employees, customers, and sales and manufacturers representatives. Founded in 1973 by the Berri family, the company originally designed and built a...

Continue Reading

Hexagon Metrology launches online technical support center

May 23, 2013

Hexagon Metrology, North Kingstown, R.I., has established the Hexagon Metrology Support Center, an online portal at http://support.hexagonmetrology.us that serves as a centralized resource for support of the company’s products. Customers have 24/7 access to FAQs and receive lifetime diagnostic...

Continue Reading

Tube fin removal tool peels rapidly for tube inspection - TheFabricator.com

Tube fin removal tool peels rapidly for tube inspection

May 23, 2013

The Fin MILLHOG® tube fin removal tool from Esco Tool is designed to peel back 4 in. of fin in less than 2 min. to permit rapid inspection and X-ray of the weld for quality control. Suitable for tube repair and replacement, this portable tool mounts rigidly in the tube ID, has no reaction...

Continue Reading