Plasma Cutting Products

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content

Plasma cutting system processes all AISC structural shapes

June 9, 2009

Peddinghaus Corp. has introduced a new thermal processing technology called Ring of Fire. It has the capacity to process all AISC structural shapes, including beams, columns, angle iron, channel iron, HSS square and rectangular tubes, and plate and flat stock.The compact machine uses plasma cutting...

Continue Reading

Manual plasma cutting inverters suitable for cutting all electrically conductive materials

May 12, 2009

Kjellberg Finsterwalde has introduced a new series of manual plasma cutting machines. Models CUTi 40, CUTi 70, CUTi 90, and CUTi 120 are suitable for cutting all electrically conductive materials. Inverter technology makes the machines lightweight for portability and allows them to operate with...

Continue Reading

90-degree manual plasma cutting torch released

March 10, 2009

Thermal Dynamics has announced the release of the 90-degree 1Torch. It uses the same 30 consumables as the 75-degree model to cover the spectrum of manual plasma cutting and gouging from 20 amps through 120 amps.Designed as a replacement torch, it can be combined with an adapter to allow for...

Continue Reading

Plasma cutting, gouging system designed for both hand-held, mechanized applications

December 16, 2008

Hypertherm has introduced the Powermax45®, a portable, 1/2-in. plasma cutting and gouging system. The single-gas system (air and nitrogen) is designed for both hand-held and mechanized applications.With a recommended 1/2-in. cut capacity and 1-in. severance, the 37-lb. system is suitable for...

Continue Reading

Replacement parts designed for Kaliburn Proline plasma torches

November 11, 2008

The American Torch Tip Co. offers replacement parts for use on the Kaliburn Proline 2200 and 2600 plasma torches.The parts are manufactured in the company's Bradenton, Fla., facility. The emphasis has been on developing a high-quality product with extremely close tolerances to help ensure good...

Continue Reading

275-amp plasma cutting consumables introduced

August 12, 2008

Hypertherm's Centricut brand has announced the availability of 275-amp consumables for InnerLogic (Kaliburn) ProLine 2260 and FineLine 260 systems.The new consumable line includes the company's patented SilverLine® electrodes, which have a solid silver front end welded to a copper electrode...

Continue Reading

Manual plasma cutting line expanded

August 12, 2008

ESAB Welding & Cutting Products has launched two new models in its PowerCut™ line of Plasmarc™ manual cutting packages. The lightweight, portable 1600 and 1300 models offer the highest speeds and thickness capabilities in their class, as well as high duty cycles, the company reports.The...

Continue Reading

Plasma cutting system suitable for HVACR applications

July 15, 2008

Thermal Dynamics has introduced the AirCut 15C manual plasma cutting system, which is suitable for HVACR applications.The 29-lb. system, which has a built-in air compressor, cuts up to 3/16 in. with a 1/8-in. recommended cut. It includes a 120-V, 15-amp...

Continue Reading

Replacement bodies designed for Powermax— torches

July 15, 2008

Thermacut Inc. has introduced a line of replacement parts for Hypertherm® Powermax® T-60® and T-80® hand torch bodies; 25- and 50-ft. lead sets; and torch with leads assemblies. The parts are compatible with Powermax 1000 and 1250 power...

Continue Reading

Uniframe plasma cutting system has compact footprint

June 17, 2008

AKS Cutting Systems has introduced the tru-kut heavy-duty, 5-ft. by 10-ft. plasma cutting system. The rigid, fully welded steel frame provides a stable platform, the company reports.Single setup machining of the frame and mounting surfaces helps improve system accuracy. The uniframe design provides...

Continue Reading

Plasma cutting machine suitable for HVAC, small shops

March 11, 2008

3D Mfg. Inc.'s Razor Cut EL plasma cutting machine has a welded tubular frame and linear-motion rails—which are driven by a servo positioning system—on the X, Y, and Z axes.The system has a light-duty power supply suitable for HVAC and small sheet metal shops. It can cut at more than...

Continue Reading

Nesting software offers plasma cutting support

March 11, 2008

The ProNest nesting system from MTC Software Inc. now offers plasma cutting support. A sheet and plate processing software program, the system automates industry-standard CNC, automatic gas plasma power supplies, and torch height controls.The company says the software also reduces the manual...

Continue Reading

150-amp set added to consumable line

January 15, 2008

Hypertherm has added a 150-amp consumable set to its Centricut® brand Innerlogic Proline2200 consumable line.The consumables feature patented SilverLine® electrode technology, which involves welding a solid silver front end to a copper electrode base and inserting a hafnium pin into the...

Continue Reading

Plasma cutting machine offers unitized construction, multiple torch options

January 15, 2008

MG Systems and Welding has introduced the EdgeMax plasma cutting system, which offers unitized construction and multiple plasma torch options.The system is suitable for HVAC, general fabrication, and precision plasma cutting with three basic models: the H, the G, and the P. The H is designed for...

Continue Reading

Consumable kit simplifies plasma cutting

December 11, 2007

Hypertherm offers a consumable kit designed to simplify and optimize plasma cutting for owners of Powermax1000®, 1250, and 1650.Consumables for all types of cutting possible with a Powermax are included in the new kit. It has shielded consumables for everyday drag cutting in which the operator...

Continue Reading