Testing and Measuring Products

Whether you need to measure dimensions or perform some sort of flaw detection on sheet, tube, or pipe, you'll find what you need in this technology area. It discusses measuring coordinates, diameters, and hardnesses; flaw detection using eddy current, ultrasonic, radiographic, and X-ray systems; and using a few other equipment types, such as vision systems and material composition analyzers.

Filter Content
Optical CMM updated for welded studs - TheFabricator.com

Optical CMM updated for welded studs

May 10, 2012

Aicon has updated its DPA optical measurement system, which uses a high-resolution digital camera as a sensor to measure any size object. The new features include scale bar generation, welded stud measurement, and a telescope camera stand. Scale bar generation handles four rather than two...

Continue Reading

Multisensor vision measuring machine inspects complex features

May 3, 2012

Hexagon Metrology has released the Optiv® Classic 321GL tp benchtop vision measuring machine. It features 6.5x motorized, CNC zoom optics that contribute to levels of accuracy approaching 2μ. Each unit is preconfigured to add a touch-probe for multisensor measurement. The unit is suitable for...

Continue Reading

Shop floor CMMs designed for portability - TheFabricator.com

Shop floor CMMs designed for portability

April 24, 2012

Hexagon Metrology has announced the launch of Brown & Sharpe 4.5.4 SF shop floor CMM. With a focus on portability, the new CMM has a small footprint of 52.2 by 32.8 by 79.5 in., which fits through a standard door. Its computer, controller, and interface boxes are integrated into one self-contained...

Continue Reading

Tonnage monitor works with most press machines

April 16, 2012

Helm Instrument has introduced the PTM-4500 LoadGard tonnage monitor. It accepts input from up to six frame or in-die-mounted strain-gauge sensors. The monitor can be used with most press machines, including hydraulic, thermoforming, die cast, injection molding, and forging. Built-in alarms help...

Continue Reading

Welding inspection system is laser-based

March 14, 2012

Servo-Robot has introduced the Wiki-Scan hand-held wireless system for welding inspection. The laser-based tool can measure part fit-up before welding to help ensure that the joint preparation meets procedure requirements. It provides a 3-D scan of joints and weld beads, measuring them for...

Continue Reading

Part inspection system features expanded field of view - TheFabricator.com

Part inspection system features expanded field of view

March 13, 2012

George Products Co. Inc. has introduced the CoreX2 part inspection system. Its field of view is 3.40 by 2.80 in., allowing users to measure parts up to 3.375 in. long and up to 2.75 in. dia. to an accuracy of ±0.0002 in. Working with a shadow (profile view) of the part, the system takes...

Continue Reading

Tension hydrotester updated

March 8, 2012

Brandt Engineered Products Ltd. has introduced improvements to its tension hydrotester. Hydraulic flow to the pressure intensification system has been doubled. Higher-flow vertical turbine pumps provide up to 1,200 GPM, and a 180 percent larger air purge valve results in less back pressure and...

Continue Reading

Bolt-on carriage lets crawler inspect variety of pipe sizes - TheFabricator.com

Bolt-on carriage lets crawler inspect variety of pipe sizes

February 16, 2012

The Envirosight ROVVER X™ can inspect many pipe sizes with the addition of a bolt-on carriage that raises the crawler and expands its wheelbase and ground clearance. The carriage, which attaches in seconds, accepts all ROVVER wheels, as well as two new pneumatic wheel options. When used...

Continue Reading

Inline, 2-D optical micrometer available in three sensor head sizes - TheFabricator.com

Inline, 2-D optical micrometer available in three sensor head sizes

December 14, 2011

The new TM-3000 2-D optical micrometer from Keyence is designed to combine the functionality of a laser scan micrometer, machine vision system, and optical comparator into a single device for 100 percent automated high-speed, inline, or offline measurement and inspection applications. It is...

Continue Reading

Portable measuring system features dynamic referencing function

December 6, 2011

MoveInspect from Aicon, a portable measuring system that works with high-resolution digital cameras and a hand-held probe, features a dynamic referencing function that compensates for object and measuring device movement so they do not affect results. The system uses optical reference points so...

Continue Reading

Bending simulation software features virtual gauge check

September 26, 2011

Aicon has launched the new software version 4.7 for its TubeInspect optical tube measuring system. The software lets operators simulate the bending process considering individual correction values. It also verifies the effect of those values on accuracy to gauge via a virtual gauge check. With the...

Continue Reading

Noncontact tube inspection system measures tubes without risking deflection - TheFabricator.com

Noncontact tube inspection system measures tubes without risking deflection

September 8, 2011

Hexagon Metrology offers the Romer tube inspection system for measuring soft, fragile, or flexible tubes without risk of deflection. New to the system are noncontact infrared probes that provide visual notification via a laser stripe indicating the measured area. To inspect brackets, flanges,...

Continue Reading

Stereo microscope combines long focal length, large viewing field, distortion-free vision

August 1, 2011

The new FX-4 stereo microscope from Titan Tool Supply Inc. combines long focal length, a large field of view, and distortion-free vision with a depth of field up to 0.1875 in. at 10x to deliver 3-D views. Featuring an adjustable aluminum stand, the microscope is designed for assembly operations,...

Continue Reading

Hardness testers introduced - TheFabricator.com

Hardness testers introduced

May 31, 2011

The MicroMet 6000 series, a new class of dead-weight microindentation Vickers/Knoop hardness testers, is available from Buehler. The unit's hybrid user interface combines a touchscreen LCD for setup and data entry with hard-switch buttons for daily operation. A tabbed menu structure enables...

Continue Reading

Portable measurement arm/laser probe available in three working volumes - TheFabricator.com

Portable measurement arm/laser probe available in three working volumes

May 2, 2011

Faro Technologies Inc. has introduced the Faro Edge portable measurement arm and V4 laser line probe. The portable measurement arm allows manufacturers to verify their product quality by performing inspections, tool certifications, CAD-to-part analysis, and reverse engineering via hard probing...

Continue Reading