|
|
Welding >
Cutting and Weld Prep Tech Cell >
Cutting and Weld Prep News Release List
Cutting and weld prep related products
There are 9 products releases related to cutting and weld prep.
Metabo Corp. now offers its expanded Choice Cuts line of thin cutting wheels matched to specific applications.
The expanded line features four wheel types with a wider selection of job-matched abrasive grains and engineered resin bond formulas to enhance cutting speeds and wheel life.
Suitable...
9/9/09
Dynabrade's air-powered Dynascaler is a descaling and surface preparation tool suitable for heavy-duty applications. The tool powers Roto Peen bonded flap assemblies for removing rust, oxide, scale, old paint, and tough coatings.
Hand-held tools are available in both straight-line and right-angle...
7/14/09
Peddinghaus Corp. has introduced a new thermal processing technology called Ring of Fire. It has the capacity to process all AISC structural shapes, including beams, columns, angle iron, channel iron, HSS square and rectangular tubes, and plate and flat stock.
The compact machine uses plasma cut...
6/9/09
Metabo Corp.'s compact W8-125, a 5-in. angle grinder, is suitable for finishing welded seams, rough grinding for weld preparation, and sanding and cutting applications. The grinder employs cooling technology with repositioned brushes for unrestricted airflow and a fan that pulls air through the tool...
11/11/08
Esco Tool offers the MILLHOG® Dictator ID clamping welding end prep tool. It is designed for beveling pipes in which the weld is critical because of high temperatures and pressures.
The tool is suitable for use on heavy-wall steam or process pipes up to 20 in. dia. made of stainless steel, s...
5/13/08
Metabo Corp. has introduced the W6-115, a 4-1/2-in. angle grinder.
The 4.5-lb. grinder has a 2-3/16-in.-dia. grip and can be used in many different positions, the company reports. It has a 650-W, 6-amp motor and a no-load speed of 11,000 RPM. Maximum torque is 16 in.-lbs.
The grinder features ...
4/15/08
Exair has introduced its Micro Air Nozzle™ that provides blowoff with a directed high-volume, high-velocity airflow.
The nozzle projects less than 1 in. past the mounting surface, which allows for installation where space is limited. The stainless steel construction is suitable for blowoff, ...
11/8/05
Abtex Corp. BRADEX® fiber abrasive brushes are designed to fit most deburring machines.
The fineblanking brushes have extra fill density for placing more fibers across the face of the workpiece. The fibers are embedded in a composite resin disk.
Brush diameters range from 2 in. to 48 in., with a 6...
2/8/05
Weiler Corp. offers the Nylox® line of abrasive nylon brushes designed to deburr and finish in one setup.
Abrasive grain-impregnated nylon filaments act like flexible files, deburring and edge blending as they wipe. Suitable for automated, in-machine processes, the brushes remove burrs and finish p...
1/11/05
|
|
833 Featherstone Rd. 
Articles