|
|
Stamping >
Press Feeding Tech Cell >
Press Feeding News Release List
Press feeding related products
There are 10 products releases related to press feeding.
Presto Lifts Inc. offers the PowerStak™ counterbalanced stacker that works with any type pallet or skid and is suitable for servicing racks, loading and unloading trucks, feeding machinery, and other applications in which straddle legs could get in the way.
With a load capacity of 1,100 lbs....
3/11/08
Peerless Industries has installed a Cooper-Weymouth, Peterson 36-in.-wide conventional press feed line for processing plasma and projection television brackets. The system processes 36-in.-wide coils of CRS from 0.030 in. to 0.164 in. thick with a weight capacity up to 8,000 lbs.
The press feed l...
10/9/07
Green Valley Mfg. Inc. has introduced the Titan 2327, a 12,000-lb.-capacity coil manipulator that allows the operator to safely transfer palletized steel coils to a coil cart. The load deck rotates 90 degrees to invert the coil, and a cart is then positioned under the coil for extraction and placeme...
9/11/07
Coe Press Equipment has developed a new series of zigzag servo roll feeds for staggered feeding applications of narrow-width coil.
The roll feeds process coil widths from 12 to 30 in. and thicknesses of 0.020 to 0.187 in. The press-mounted units provide processing speeds of 576 FPM and accelerati...
9/12/06
The WigWag™ feed from Dynamic Feeds Inc. achieves a zigzag (nested) pattern in a small footprint by pivoting motion.
The system is controlled by a single software package and uses CAN bus communication protocol and a B&R Power Panel 251 as a visualization device with integrated control funct...
8/8/06
A new servo feed system for presses from Straus-Artys Corp. works with round bar, wire, tubing, and profile parts. Four models are available that handle up to 1.00-in. barstock or 2.750-in.-OD by 0.062-in.-wall tubing.
The line incorporates 16 rolls in two planes with five driven and three adjust...
3/7/06
Eriez offers its Hi-Powr sheet fanners for hard-to-handle steel sheets. According to the company, the fanners eliminate doubles and increase production.
The enclosed magnetic circuit is tamper proof and can withstand severe usage. Semi-sticky, oily, bent, and heavy-gauge sheet steel can be fanned...
1/10/06
Unist Inc. offers it’s uni-Roller® positive-displacement coil stock lubrication system for coating coil and blank stock in metal stamping, fineblanking, roll forming, and metal fabricating.
The system can deliver fluid to both the top and bottom of the stock, and fluid is applied uniformly w...
11/8/05
Schuler Inc. has introduced its Crossbar Feeder that can link individual mechanical and hydraulic presses.
The feeder can be fitted to existing mechanical and hydraulic press lines— regardless of press spacing and without having to increase upright width— and can raise output to up to 13 SPM, the c...
12/7/04
The Whiplash™ series of telescopic press feeding systems from ATR-Strothmann is designed to handle small- to large-sized parts with payloads ranging from 88 to 330 lbs. (40 to 150 kg) and Y-axis accelerations from 10 to 12.5 m/s2.
Each of the feeders functions as a press loader, press unloa...
4/8/04
|
|
833 Featherstone Rd. 
Articles