|
|
Cutting >
Waterjet Cutting Tech Cell >
Waterjet Cutting News Release List
Waterjet cutting related products
There are 23 products releases related to waterjet cutting.
Bystronic Inc. has introduced a new manual bevel angle cutting head option for the Byjet waterjet cutting system. This option allows cutting at up to a 45-degree angle. In conjunction with the integrated height control and collision protection, the bevel head can be used for weld preparation or cutt...
5/13/08
Bystronic Inc. has introduced the Bypump 50 APC (active pressure control) intensifier pump for its line of Byjet precision abrasive waterjet cutting systems.
The pump incorporates a dual-cylinder intensifier design. With CNC for each of the cylinders, the pump maintains constant pressure without ...
5/13/08
The iP55-280DS diesel-powered waterjet intensifier pump from Jet Edge Inc.—suitable for use in remote and mobile locations in which electricity is scarce—is powered by a 280-HP Cummins turbo diesel engine that meets domestic and international Tier 3 emissions standards.
The intensifie...
4/15/08
MTC Software Inc. says its ProNest® nesting software now offers support for laser and waterjet cutting brands commonly used in Asian markets, such as Hankwang, Daewoo, Nisshinbo, and TOPS. The software already supports the TRUMPF®, Bystronic, Mitsubishi, Amada, OMAX®, and Flow brands....
4/15/08
Bystronic Inc. has introduced the Byjet L, an abrasive waterjet cutting system designed to process large sheet sizes. The machine is suitable for steel service centers and companies that process large volumes of waterjet-cut parts or large sheets.
The base frame of the machine has a modular const...
3/11/08
The Hydro-Jet Eco prototyping waterjet cutting system from Knuth Machine Tools USA Inc. is intended for low-volume work and suitable for companies seeking to bring outsourced work back in-house. Using pure-water and abrasive cutting, the system cuts nearly any material.
The included software pack...
11/6/07
Jet Edge Inc. offers a high-rail-gantry, precision waterjet cutting system, an iP60-50 ultrahigh-pressure intensifier pump, and a self-feeding pneumatic drill.
The waterjet system can produce complex parts out of nearly any material, the company reports. It features a stable overhead design that ...
10/9/07
Flow Intl. Corp.'s WMC2 waterjet machining center is now available with 87,000-PSI cutting capability with the company's HyperPressure technology. The company says waterjet cutting at 87,000 PSI provides faster cutting; increased production; lower abrasive consumption, with 30 to 50 percent less abr...
10/9/07
OMAX® Corp.'s patented control software for abrasive waterjet machines runs on the Windows® Vista operating system.
Version 11 of the software supports the company's Intelli-MAX® technologies and includes DWF and PDF file importing, updated DWG, DXF, IGES, and other file import fil...
9/11/07
ProMotion Controls, in cooperation with Kollmorgen Servotronix and Koike Aronson, has developed a high-performance digital AC drive amplifier system for shape-cutting machinery. The AC iDrives are the first AC drives designed to work with various motors, different motor sizes, and small to large mac...
4/10/07
OMAX will use its 2626|xp JetMachining® Center to demonstrate abrasivejet machining at the Pacific Design & Manufacturing Show and MD&M West 2007. The machine is capable of up to ±0.001 in. positioning accuracy over the entirety of its 26 in. by 22 in. axis travels, the company says.
...
2/13/07
WARDJet's pneumatic drill mount automatically drills a hole through material at a specific offset from the waterjet cutting head. Once the hole is drilled, the waterjet then starts the cut inside the predrilled hole. The CAD/CAM program IGEMS automates the entire process.
The drill, which require...
1/9/07
MC Machinery Systems Inc. offers a Mitsubishi waterjet line designed to work with EDM technology.
Three models are available. The two- or three-axis Classica, four-axis Suprema, and five-axis Evolution waterjets feature stainless steel tanks for simplified maintenance and clean cutting conditions...
9/12/06
MC Machinery Systems Inc. now offers three waterjets—the Classica, a two-axis unit; the Suprema, a four-axis with tilt head; and the Evolution, a five-axis unit.
The Classica features 2-D CAD/CAM software with nesting capabilities and an accuracy and repeatability of ± 0.004 in.
Suprema and Ev...
5/9/06
The Byjet 3015 waterjet cutting system from Bystronic Inc. has a shuttle table that the company says can increase productivity up to 30 percent.
The new CNC intensifier produces consistent square edges that the machine cuts without requiring tilting heads to compensate for taper.
The HPT (hi...
3/7/06
Flow Intl. Corp. offers the FlowMaster® 6.01, an upgraded version of the company’s Windows®-based waterjet control system.The system allows the waterjet to cut up to 10 percent faster than the version 6.0, depending on material and part geometry. It also features Active Tolerance Control, ...
2/7/06
MG Systems and Welding has introduced the version 3.0 of its Global Control software.
The new version includes a Job List feature that allows users to load several part programs into memory, assign unique cut parameters to each program, and set a location on the cutting table. A programmer can cr...
2/7/06
Bystronic has introduced its ByVision Control CNC operating platform with a 15-in. touchscreen that allows users to maneuver through screen selections quickly for easy setup and operation.
The user is guided through the programming and manufacturing process with a user interface operating within ...
2/7/06
The M-Series of waterjets from WARDJet Inc. enables operators to use a laser, robotic arm, oxyfuel cutter, or plasma cutter as a waterjet and drive the intensifier off compressed air in the shop.
A tent specifically designed and built to contain all the abrasive and water inside the tank makes it...
1/10/06
The 2652 JetMachining® Center from Omax® cuts standard-size steel and aluminum sheets. It has a direct-drive, high-pressure water pump capable of pressurizing water to as high as 55,000 PSI.
The Tilt-A-Jet® feature tilts the waterjet nozzle so the stream contacts the material at a varie...
5/10/05
Knuth USA offers the Hydro-Jet Eco 1005, a compact waterjet cutting system with a 20- by 40-in. work area.
The abrasive model is suitable for cutting aluminum, steel, and compound materials. It combines servomotors and precision-tuned drives with simple programming via an integrated PC control with...
12/7/04
Machine Tools USA offers the Knuth USA Hydro-Jet five-axis waterjet cutting machine designed to produce complex ,3-D shapes in a single-pass operation.
The system operates with both pure water and abrasive-added cutter heads and includes a computer-controlled gantry. Made of stainless steel, the ...
9/14/04
Bystronic Inc.’s waterjet cutting system, Byjet, is an abrasive, cold-cutting system that produces clean, burr-free cutting edges. The system cuts a variety of flat sheet, tubular, and profiled materials without heat-induced structural changes. Optional rotary axis and shuttle table are availa...
7/13/04
|
|
833 Featherstone Rd. 
Articles
