- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Essential versus nonessential variables for a WPS
- By Paul Cameron
- Updated February 7, 2024
- November 30, 2016
- Article
- Arc Welding
Q: I am unclear on the American Petroleum Institute’s Standard 1104 regarding a weld procedure specification (WPS). Section 5.3.2.3 says:
The ranges of specified outside diameters (ODs) and specified wall thicknesses over which the procedure is applicable shall be identified. Groupings are shown in 6.2.2 d) and 6.2.2 e).
Are they saying that outside diameter is not an essential variable in a WPS but wall thickness is?
A: We're often familiar with essential variables—those variables that, once changed beyond specific limits, require requalification of a WPS. But what is a nonessential variable? These variables may not show up in a table or list telling us what are allowable variations, but they are equally important when writing your WPS. Oftentimes these are not included on a WPS, which only leads to confusion when customers, inspectors, or welders try to interpret or apply your WPS.
When a nonessential variable is changed, no additional testing is required, but the WPS needs to be changed to reflect the new variable.
Welding Variables to Consider
Here are some examples of what I mean:
- Base Materials. Although base material groups can be essential, the individual material types are considered nonessential. You completed a WPS of a specific material and it qualified you to within a group. If you want to change or develop a new WPS to reflect a different material within the group, it is simply a matter of paperwork.
- Joint Type. Once you qualify a specific joint type that test-qualifies a large number of joint types, you only need to change your paperwork to reflect a different joint design. You can now see how a single procedure qualification record (PQR) can qualify a large number of WPSs.
- Electrode Extension. You can vary current by as much as 50 amps simply by changing your stick-out.
- Electrode Type. Are you changing your gas tungsten arc welding (GTAW) electrode?
- Welding Technique. Should you weave or whip? Are you allowed to oscillate?
All of these should be addressed in the WPS.
A Few More Tips
It surprised me that diameter is not an essential variable per Section 5.4 of the standard. But listing it on the WPS is required. According to 5.3 Welding Procedure Specification, 5.3.1 General:
The welding procedure specification shall include the information specified in 5.3.2 where applicable.
So thickness is an essential variable, but diameter is considered a nonessential variable. However, both must be listed on the WPS.
About the Author
Paul Cameron
Braun Intertec
4210 Highway 14 East
Rochester, MN 55904
About the Publication
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/05/2024
- Running Time:
- 65:35
After Ludlow Manufacturing Inc. (LMI) received The Fabricator's 2024 Industry Award, Todd Ludlow, founder and president of the...
- Trending Articles
A welding instructor’s career path to working with metal
Urban Steel Rockstars festival will highlight welding and steel industry
Keys to adopting welding automation successfully
Aluminum Etc.: You can cut aluminum on a CNC plasma system
Portable MIG welding machines offer automatic setup
- Industry Events
NASCC: The Steel Conference
- March 20 - 22, 2024
- San Antonio,
The Fabricator's Manufacturers & Suppliers Event (MSE)
- March 26, 2024
- Schaumburg, IL
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,