Senior Sales Application Engineer
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Consumables Corner: Welding heat treatable steels
- By Jay Ginder and Jerry Mathison
- July 2, 2014
- Article
- Consumables
Q: Our shop won a contract that requires welding 4130 steel. I’ve been told this is a heat-treatable steel. Can you tell me which different welding procedures have to be used to weld this material?
A: The most commonly welded heat-treatable steels are 4130, 4340, and 8630. However, any steel prefaced with a 41, 43, or 86 is considered heat-treatable. When a weldment is heat treated, it is put into a furnace at a predetermined temperature and cooling rate. The heat treatment produces a desired microstructure that changes the mechanical properties of the material to a desired strength and ductility level. Do not confuse a heat treatment with postweld stress relief. The postweld stress relief is exactly that—a method to relieve stresses that are the direct result of the welding process.
To select the correct filler metal you must ask yourself the follow questions: Will the weldment be heat treated after welding or used in the as-welded condition? Are all the weld joints to be joined to the same-strength material?
If the parts are going to be heat treated, you must weld them with a similarly heat-treated filler metal to ensure that the weld metal will respond to the heat treatment consistently with the parent metal. This ensures that the weld metal will have strength and ductility similar to the base material after heat treatment.
If the welded component will be used in the as-welded or stress-relieved condition, select a low-hydrogen type electrode with a tensile strength of about 110,000 PSI. In some cases, a specification will allow or require a lower-strength filler material. On single pass fillet welds, tests have shown that diluting the weld and base material will produce an adequate strength. When a higher-strength part is welded to a lower-strength carbon steel, the filler metal should be a low-hydrogen type that matches the lower-strength material.
To prevent major welding problems when welding heat-treatable steel, you must use proper preheat and interpass temperatures to eliminate or reduce cracking. Cracks can occur in the HAZ of the material or possibly the centerline in the weld deposit. The proper preheat and interpass temperature is usually 400 to 600 degrees F for heat-treatable steels.
When welding a quench and tempered steel like T1, which has received a heat treatment to achieve a particular strength level, use much lower preheat and interpass temperatures to help control heat input so the designed strength level is maintained. Usually for T1 steels less than 1 in. thick, a 50-degree-F preheat is recommended. As thickness increases, preheat can increase: for 1 to 2 in., preheat to 150 degrees; for more than 2 in., preheat to 200 degrees.
About the Authors
Jay Ginder
Filler Metal Manufacturing Center 801 Wilson Ave.
Hanover, PA 17331
Jerry Mathison
Senior Sales Application Engineer
411 S. Ebenezer Road
Florence, SC 29501
843-669-4411
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
A welding instructor’s career path to working with metal
The importance of welding procedure specification (WPS)
Keys to adopting welding automation successfully
Urban Steel Rockstars festival will highlight welding and steel industry
Sensors use AI to assist robotic weld grinding
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY