Product Manager
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
SMAW: The lowdown on the lingo
- By Joe Gitter and Bruce Morrett
- July 25, 2012
- Article
- Arc Welding
When it comes to shielded metal arc welding (SMAW), following formal welding procedures is critical to achieving quality results and meaningful productivity. The way welding operators speak about the process, however, isn’t always so formal. Lingo related to equipment, technique, arc characteristics, and more is common throughout the industry. In many cases, you won’t find these definitions in your standard welding glossary. Still, they are a prevalent part of the culture of welding.
The following are some terms and their definitions to help you navigate your way through the lingo.
Weld Beads and Pools
It’s not surprising that so much of the lingo relates to the weld and the weld pool. After all, they are at the core of the process. Here are some terms you may encounter on the job site.
- Stringer bead
- A narrow, straight weld bead that is created by moving the SMAW electrode straight along the weld joint. A quality stringer bead should have good tie-in on both sides of the weld.
- Wetting-out
- The ability of a weld puddle to flow evenly, allowing both sides of the weld to merge smoothly with the base material.
- Root pass
- The first weld bead placed in the weld joint in a multipass weld.
- Fill
- Also referred to as a fill pass, it is the amount of weld bead necessary to fill the weld joint. This pass comes after the root pass and before the cap pass (see next term). In some applications, multiple fill passes are necessary.
- Cap
- The final weld bead in a weld joint. It may be completed in the form of a stringer bead or by a weaving motion back and forth.
- Fisheye
- The shape of the puddle while welding.It is sometimes also used to describe the shape of the crater at the end of the weld.
- Keyhole
- The shape of the hole that is formed while welding an open-root joint, particularly with an AWS 6010 SMAW electrode. It allows for good penetration and tie-in in the completed weld.
The Arc
Arc characteristics are important in any welding process. These allow you to determine the correct travel speed and motion, or method of moving, the SMAW electrode to gain the desired results. The following terms all refer to the arc or technology used to adjust the arc for improved performance.
- Stiff
- An arc that provides a lot of drive (dig) into the weld joint. It often is associated with increased spatter.
- Soft
- An arc that has less drive (dig) and potentially less penetration into the weld joint.
- Dig
- Also called arc force or arc control. It is the ability to adjust the drive of the SMAW electrode to achieve more or less penetration into the weld joint.
- Arc control
- The ability to adjust the amount of dig for the best weld result. It also refers to the technology that provides the power source with additional amperage during low-voltage (short arc length) conditions. In this case, it helps you avoid “sticking” the SMAW electrode when a short arc length is used.
- Hot start
- Function used on some SMAW power sources to simplify arc starting when using difficult-to-start electrodes. It works by adding more current to help establish the arc.
- Arc blow
- The deflection of the arc away from the direction of travel caused by either magnetic or thermal influences. For example, as the weld gets closer to the end of a plate, it may deflect to one side, forward, or backward, which typically causes heavy spatter and undercutting. Arc blow caused by magnetic buildup also is referred to as arc wander.
Techniques
Creating quality welds with the SMAW process requires special attention to welding parameters and procedures. It also demands attention to various welding positions. Across various industries, the following are some common related terms you may encounter.
- Downhill
- The technique of creating a weld in a vertical-down progression; that is, from top to bottom of the weld joint.
- Uphill
- The technique of creating a weld in a vertical-up progression; that is, from bottom to top of the weld joint.
- Weave
- Also referred to as oscillating or stitching. It is the technique of moving the SMAW electrode from side to side in order to wash the sides of the weld pool into the base material.
Weld Defects
Weld defects are an unfortunate reality in any welding process – and ones that proper technique and adherence to welding parameters can help prevent. Some in the industry call common weld defects by these terms.
- Cold lap
- A defect that occurs when there is lack of penetration on one leg of the weld. Also called lack of fusion or incomplete fusion, it most often is caused by travel speeds that are too slow or weaves that are too wide. It also can be caused by lack of heat input, which prevents the weld and base metal from fusing together.
- Undercut
- A weld defect in which the base material overhangs the weld bead. It appears as a groove or crater near the outer edges of the weld and often results from voltage that is too high or using an incorrect weld angle.
- Wagon tracks
- Also called worm tracking, this weld defect is caused by hydrogen that has been trapped by the freezing slag. The defect, typically the result of excessive voltage, appears when a bubble flows into the weld puddle and evaporates into the atmosphere.
Equipment
You can’t get the job done without the proper equipment. And even though most of the focus is on the power source, other components play an important part in the SMAW process too.
- Stinger
- Another name for the SMAW electrode holder, it comes in various sizes for light- to heavy-duty welding applications.
- Whip
- The cable—typically 10 to 15 ft. long—that is connected to the SMAW electrode holder, or stinger.
Electrodes
SMAW electrodes come in various diameters and alloys to meet the needs of differing base materials and industry applications. Each has its own unique arc and burn-off characteristics.
- Rods
- An informal term for a SMAW electrode.
- Cellulosic
- SMAW electrodes having organic material, such as paper, as the main component. These electrodes tend to have deep penetrating capabilities.
- Low hydrogen
- SMAW electrodes that provide weld deposits containing a low amount of hydrogen gas, typically 4 to 8 ml per 100 g of weldment. The low amounts of hydrogen help minimize cracking in the completed weld.
- Fingernail
- The shape of the SMAW electrode as the flux burns off the end.
- Unloading
- The way a SMAW electrode, typically an AWS 7018 classification, burns off while welding.It occurs as a large amount of the SMAW electrode releases across the arc, often resulting in additional spatter.
Keeping up with SMAW lingo isn’t critical to achieving good welds; rather, following proper procedures, practice, and careful attention to technique are critical. However, knowing some of the common lingo welders use can help you communicate effectively with others and avoid confusion on the job.
About the Authors
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI