Director, Procurement Technical Assistance Center
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
10 steps to winning a government contract - Step 8
Submitting your proposal
- By John DiGiacomo and Jim Kleckner
- April 11, 2006
- Article
- Shop Management
So it's finally time to submit your bid. Now you must decide how to send it. You can use any mail carrier, but the U.S. Postal Service is the only postal carrier that the government recognizes when considering a late bid. Keep that in mind if you're running close to the deadline.
Next, use the following check list before you send your proposal:
- I've read the bid carefully. I went over it and answered all of the questions in my mind. Remember, once you have signed it and sent it in, it's too late to say, "Oops, I made a mistake."
- I carefully read the specifications and standards that apply to the bid. Remember, it's your responsibility, not the government's ,to get the information you need to bid successfully.
- I got the entire technical package. Nothing is missing, and I haven't missed an amendment. If you miss acknowledging an amendment, the government will have to reject your offer, even if yours is the best offer.
- I bid on exactly what the buyer wants, not what I think the buyer wants. If the bid deviates from what the buyer wants, make sure your offer does include what the buyer requests. Explain yourself if necessary.
- The approval number is correct and current. I noted if the product requires special qualification approval.
- I am complying with the packaging, marking, and radio frequency identification (RFID) requirements. I have what I need from my packaging partner.
- My bid delivery schedule meets the solicitation-specified delivery requirements. I can meet the delivery schedule.
- Solicitation requirements meet my acceptance time.
- I classified my company correctly (i.e., small, woman-owned, or veteran-owned business).
- I entered all discounts (if applicable) correctly.
- I signed the contract.
- I read the entire contract before I signed it.
- I listed all of the amendments I received. I have received all necessary amendments.
- I included conditions that might modify the requirements. (Note: Beware of your cover letter. If your letterhead includes, for example, a statement about terms, price, or time of delivery that might reflect badly on your bid, it could be thrown out.)
-
I made the correct number of copies, as requested.
- I put enough postage on the bid package.
- I gave enough time for the package to get to the buying agency.
- I read the bid.
Now that you completed your check list, send in your bid. Then it's the government's responsibility. Once it receives your bid document, the government forgets that it sent you a solicitation and views it as a new and wonderful opportunity to meet a new supplier. If it's an invitation for bid (IFB), you might not even have a human buyer to deal with. In this case, everything—intake, evaluation, and award—is done electronically by a friendly computer.
The last two steps in this series will address the bid evaluation and award, quality standard, and what to do when things go wrong—and, of course, how to get paid.
John DiGiacomo is the director of the Rock Valley College Procurement Technical Assistance Center, 605 Fulton, Rockford, IL 61103, 815-921-2091, JDiGiacomo@ rvc.cc.il.us, www.wingov.com.
Jim Kleckner is a retired acquisition specialist from the Department of Defense and owner of Government Contracting Assistance, 2168 Spaulding Ave., West Dundee, IL 60118-3521, 847-426-7003, klecknerj@yahoo.com.
About the Authors
John DiGiacomo
605 Fulton
Rockford, IL 61103
815-921-2091
Jim Kleckner
Owner
Government Contracting Assistance
2168 Spaulding Ave.
West Dundee, IL 60118
847-426-7003
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY