Graduate Research Associate
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Aanandita Katre
Center for Precision Forming at The Ohio State University
1971 Neil Ave. Room 339 Baker Systems Engineering Building
Columbus, OH 43210
- From The Fabricator
R&D Update: Predicting springback when bending AHSS and aluminum alloys, Part II
- By Aanandita Katre, Ali Fallahiarezoodar, and Taylan Altan, Ph.D.
- Jan 12, 2017
- Bending and Forming
- Article
Editor’s Note: This article is Part II of a two-part series. Part I, which appeared in the November/December 2016 issue, discussed the challenges of determining Young’s modulus, one of the most important parameters for springback prediction.
- From The Fabricator
R&D Update: Predicting springback when bending AHSS and aluminum alloys, Part 1
- By Aanandita Katre, Ali Fallahiarezoodar, and Taylan Altan, Ph.D.
- Dec 5, 2016
- Bending and Forming
- Article
Editor’s Note: Part II of this article, which will appear in the January/February 2017 issue, will discuss the results and case studies of the newly introduced inverse analysis method for improving springback prediction. In the automotive industry, the use of advanced high-strength steels (AHSS)...
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Steel industry reacts to Nucor’s new weekly published HRC price
How to set a press brake backgauge manually
Capturing, recording equipment inspection data for FMEA
Are two heads better than one in fiber laser cutting?
Hypertherm Associates implements Rapyuta Robotics AMRs in warehouse
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1