February 19, 2001
One of the most common metalworking methods is drawing, which involves forming flat sheet metal into "cup-shaped" parts. If the depth of the formed cup is equal to or greater than the radius of the cup, the process is called deep drawing.Deep drawing involves placing a sheet metal blank over a...
Compared to conventional laser processing machines, the OPTIPLEX Fiber significantly increases the productivity of thin worksheet cutting with impressive accuracy and cuts up to 0.875” in CRS. The laser is designed to process reflective materials with greater thicknesses and at greater speeds than its CO2 counterpart.
Tool- and diemakers in short supply ... where does the fault line lie? - by Kate Bachman
The tool- and diemaker shortage may be blamed on the educational system's bias toward college preparatory coursework, but it's likely that other factors come into play as well. These include the 2008 near-death knell for the stamping and automotive industries, manufacturing's lingering negative image, and the expense of setting up "shop" classes in today's highly technical industrial age.
North America's leading magazine for the metal forming and fabricating industry, delivering news, technical articles, and case histories. Print subscriptions are free to qualified persons in North America involved in metal forming and fabricating.