June 29, 2015
Air bending soft aluminum has such a low tensile strength that it doesn't take much for a narrow punch tip to penetrate the surface and turn the bend sharp.
May 3, 2015
To ensure you always work within the tonnage limits of your press brake and tooling, first calculate how much tonnage you need. Second, identify your tooling’s load limits. Third, calculate the sinking tonnage limit, which, if exceeded, can embed tooling into the ram or bed. Fourth, determine your press brakes’ centerline load limit.
April 1, 2015
A material’s minimum inside bend radius shows the smallest radius that’s physically possible in an air bend, though your machines and tooling may not be able to handle the tonnage. The recommended inside bend radius, such as those found on bend allowance charts for air bends, shows you what’s optimal in typical applications
February 16, 2015
Choosing the right die for an application hinges on the tooling and press brakes you have, and the tonnage limitations of both.
July 9, 2014
Why exactly does springback occur, and how can a technician predict it? Press brake guru Steve Benson covers the basic factors.
March 24, 2014
Press brake setup is a critical part of doing any bending job correctly. By focusing on a few key areas—selection of tools and forming processes, easy-to-understand setup sheets, and ISO documentation—the press brake operator is in a much better position to succeed.
January 27, 2014
Large or profound-radius bends are those in which the inside bend radius exceeds eight times the material thickness, but is still too small to move to the plate roll. At this point, a press brake operator has to change his mindset before proceeding. This is not a typical bending job.
January 2, 2014
When bending on a press brake, thicker and harder plates require larger minimum bend radii. Finding the true minimum bend radius for steel or aluminum plate requires a little research. Nonetheless, the answers are there, waiting for you to find them.
August 1, 2013
Selecting the press brake and tooling for a job involves much more than just making sure there’s enough brute force. You need to calculate how much tonnage the job requires, then determine the best machine and tooling to handle the tonnage.
June 3, 2013
In air forming, the bend angle does not depend exclusively on the angle of the die. So why does the die angle change? There are two separate but overlapping answers; one relates to narrow die openings, and the other pertains to larger dies.