President
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
W.B. "Bud" Graham
Welded Tube Pros
P.O. Box 202
Doylestown, OH 44230
330-408-3447
How do you measure success?
- By W.B. "Bud" Graham
- Jul 11, 2006
- Tube and Pipe Production
- Article
Contrary to common opinion, a high production rate is not the key to success in making tube. Attempting to low-ball the price — while cutting corners in maintenance and upgrades -- is a poor strategy in this industry. Columnist Bud Graham provides four production scenarios that compare various rates of capacity utilization and line speed and how these affect profitability.
Envelope, please!
- By W.B. "Bud" Graham
- Jun 13, 2006
- Tube and Pipe Production
- Article
Bud Graham revisits his January/February column on problems that plague tube mills (or nearly any manufacturing company, for that matter) and shares some reader feedback. Also, he provides the runners-up and winner of a caption contest for a photo that also appeared in the January/February issue.
Eliminating problems that cause flaws
- By W.B. "Bud" Graham
- Apr 11, 2006
- Tube and Pipe Production
- Article
Problematic material? Yes, bad coil is out there. It could be mislabeled; the yield strength could vary from one part of the coil to another; it might have damaged edges; and so on. In the second part of this two-part series, columnist Bud Graham discusses steel coil, how its characteristics can vary, and how these variations can result in substandard tube.
Happy New Year!
- By W.B. "Bud" Graham
- Jan 10, 2006
- Tube and Pipe Production
- Article
How can we make 2006 better than 2005? One way is to adopt a few work-related new year's resolutions. The author lists five factors that hold the industry back--factors that everyone should resolve to overcome for a successful year.
Relief ahead in 2006?
- By W.B. "Bud" Graham
- Dec 13, 2005
- Tube and Pipe Production
- Article
An overview of the pressures faced by the tube and pipe producing industry in 2005 and the author's views on how 2006 will be similar, but with a greater emphasis on energy costs, conservation, and availability. Ends with a few reminders about tube mill maintenance and efficiency.
Scarfing tube and pipe—cut to the quick
- By W.B. "Bud" Graham
- Oct 11, 2005
- Tube and Pipe Production
- Article
Weld bead scarfing (cutting, removing, and disposing) exposes mill operators to numerous hazards, including cuts and burns from the scarf. Part I of this article discusses the reasons scarf is removed from tube and the mill parameters that affect the scarf removal process. Part II discusses a variety of manual and automated removal and disposal methods. Part III discusses strategies for improving ID weld bead removal and disposal.
Pulling taffy and producing tube
- By W.B. "Bud" Graham
- Dec 11, 2003
- Tube and Pipe Production
- Article
Do you remember going to the county fair and watching candy makers make taffy? As a child I often would watch the whirling motion of the taffy pull machine as it whipped and pulled and whipped and pulled again and again until the candy was the right consistency, texture, and color. As long as the...
Plotting for success
- By W.B. "Bud" Graham
- Oct 23, 2003
- Tube and Pipe Production
- Article
The butler slipped through the pantry area with the warm milk and, after adding some arsenic, served the beverage to his master. The butler had been gradually increasing the amount of arsenic over many months, so the change in the milk's taste wasn't noticeable. Soon the mistress and her nefarious servant would be rid of the one thing stopping their affair.
Measuring tube as it grows and shrinks
- By W.B. "Bud" Graham
- Aug 28, 2003
- Tube and Pipe Production
- Article
We always have some confusion at our house concerning desserts. My wife claims that I like only two kinds of pie: hot and cold. Well, she is mostly right. My favorite is cherry, and I love it served either hot or cold. Here's our family recipe—you be the judge. Grandma's Cherry Pie Ingredients:...
The little-known life of the scarfing tool
- By W.B. "Bud" Graham
- Jun 26, 2003
- Tube and Pipe Fabrication
- Article
Who cares about scarfing tools? There are more important things in life. When the beauty pageant contestant is asked what problem she would like to solve, she's more likely to answer "I'd like to establish world peace" than "I wish I could find ways to help scarfing tools last longer."
Solving the mysteries of the fin pass—Part 2
- By W.B. "Bud" Graham
- May 15, 2003
- Tube and Pipe Production
- Article
Editor's Note: This article is the second part of a two-part series about fin passes. Part I discusses their location, what they do, and how they do it. Part II focuses on troubleshooting.
Solving the mysteries of the fin pass—Part 1
- By W.B. "Bud" Graham
- Apr 10, 2003
- Tube and Pipe Production
- Article
The fin pass was not the first time your father gave you five bucks for your allowance. The fin passes are those forming passes that immediately follow the breakdown or initial forming stages on a tube mill. Their role is paramount in the successful final presentation of the formed tubular section to the welding process.
Don't lose your bearing!
- By W.B. "Bud" Graham
- Feb 27, 2003
- Tube and Pipe Production
- Article
It's Monday morning after a long holiday weekend, and the first shift is starting with a bang. The slit coil supplier is late with your delivery, the second-shift maintenance person has called in sick, the mill operator is going to be late to work, and you wish you were still at the beach with the family.
Inline gauge control in welded tube production: Reducing conversion losses
- By W.B. "Bud" Graham
- Jul 26, 2001
- Tube and Pipe Production
- Article
Reducing scrap when converting strip to finished tube is a huge step in bettering your bottom line.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1