- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
NAM-member survey points to positive year
- November 16, 2006
- News Release
- Shop Management
A National Association of Manufacturers' (NAM) 2006 Small Manufacturers Operating Survey showed respondents anticipate solid growth in the months ahead from strong sales and increases in exports and capital investment. Yet hopes were tempered by rising health care costs, taxes, and legal fees. "This is asweet and sour mix of information," said David Huether, the NAM's chief economist. "While the overall economy is downshifting due to housing, the survey shows this has not yet significantly affected manufacturers."
Well over half of respondents, or 63 percent, expect their sales to grow more than five percent this year. "This is the second most optimistic response in a decade and more positive than the expectations of sales growth in the later half of the 1990s," Huether said.
An improved focus on foreign markets is a highlight of this survey. More than one in 10 (10.7 percent) of the survey respondents say that exports account for at least a quarter of their company's sales. This is an improvement from 2001 when less than four percent of survey respondents got a quarter of their sales from exports. "This shows the benefits that come from a lower dollar and solid growth abroad," he said.
Similarly, 41 percent of survey respondents expect they will increase capital investment in 2006 by more than five percent. "These are positive figures that point to increased capital spending and job growth," Huether said. "This is the most optimistic outlook in eight years."
Dampening these positive figures is the news of rising health care costs. "According to the study, health care costs are one of the most serious problems for our members," said Jeri Gillespie, the NAM's director of human resource policy. Nearly half of respondents said their health care costs have risen from 11 to 20 percent in the past year. "They expect to cover these rising costs by asking employees to kick in more of their own money or by changing to a defined contribution or Health Savings Account (HSA) approach," she said.
"Legal fees, such as spending on death tax planning, continue to pose an unfair burden on small manufacturers," said Bob Shepler, the NAM's director of corporate finance and tax. "Congress's inability to permanently repeal this onerous tax costs small manufacturers over $94,000 a year. This is money that cannot be used for capital investment, research and development, or hiring."
Even more costly, are the increasing legal fees to fight the frivolous lawsuits brought against nearly half of the manufacturers surveyed. "These cases cost small manufacturers an average of $195,000 a year," said Larry Fineran, the NAM's vice president of legal reform policy. "They consume money and time while addressing unreasonable requests and saddling manufacturer's with unfair legal burdens."
NAM's 2006 Small Manufacturers Operating Survey is available at: www.nam.org/2006operatingsurvey.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY