- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Demag V-type crane earns Red Dot Award
- April 2, 2015
- News Release
- Materials Handling
Terex MHPS GmbH has announced that its Demag V-type crane has won the 2015 Red Dot Award: Product Design. The international jury made up of designers, design professors, and trade journalists from 25 nations recognized the V-type crane girder for high design quality in the machinery product category.
The crane is characterized by its V-shaped structure, comprising vertical struts and tapered diaphragm joints. True to bionics, the developers based their design on the honeycomb-like structure of bones, deliberately using material only where needed.
The crane’s architecture reduces the vibration frequency by 30 percent, lowers the weight by an average of 17 percent, and doubles the lifetime to over 500,000 load changes compared to conventional cranes with closed box-section girders or I-beam girders, says the manufacturer.
About 5,000 products from 56 countries were submitted for the award. The V-type crane will be shown in an exhibition from June 29 to July 26, 2015, at the Red Dot Design Museum in Essen, Germany, and will be part of the museum’s permanent exhibition in the following months.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/19/2024
- Running Time:
- 43:07
Omar Nashashibi, co-founder of The Franklin Partnership and a lobbyist representing manufacturing trade associations, joins The Fabricator Podcast...
- Industry Events
NASCC: The Steel Conference
- March 20 - 22, 2024
- San Antonio,
The Fabricator's Manufacturers & Suppliers Event (MSE)
- March 26, 2024
- Schaumburg, IL
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,