- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
ISM ROB: Down 1.6 percentage points from December, manufacturing economic activity still expanding
- February 2, 2015
- News Release
- Shop Management
Economic activity in the manufacturing sector expanded in January for the 20th consecutive month, and the overall economy grew for the 68th consecutive month, said the nation’s supply executives in the latest Manufacturing ISM Report on Business®.
The report was issued by Bradley J. Holcomb, CPSM, CPSD, chair of the Institute of Supply Management™ Manufacturing Business Survey Committee. "The January PMI® registered 53.5 percent, a decrease of 1.6 percentage points from December's seasonally adjusted reading of 55.1 percent. The New Orders Index registered 52.9 percent, a decrease of 4.9 percentage points from the seasonally adjusted reading of 57.8 percent in December. The Production Index registered 56.5 percent, 1.2 percentage points below the seasonally adjusted December reading of 57.7 percent. The Employment Index registered 54.1 percent, a decrease of 1.9 percentage points below the seasonally adjusted December reading of 56 percent. Inventories of raw materials registered 51 percent, an increase of 5.5 percentage points above the December reading of 45.5 percent. The Prices Index registered 35 percent, down 3.5 percentage points from the December reading of 38.5 percent, indicating lower raw materials prices in January relative to December. Comments from the panel indicate that most industries, but not all, are experiencing strong demand as 2015 kicks off. The West Coast dock slowdown continues to be a problem, negatively impacting both exports and imports as well as inventories."
Of the 18 manufacturing industries, 14 reported growth in January in the following order: Primary Metals; Wood Products; Printing & Related Support Activities; Miscellaneous Manufacturing; Fabricated Metal Products; Electrical Equipment, Appliances & Components; Petroleum & Coal Products; Paper Products; Transportation Equipment; Chemical Products; Machinery; Food, Beverage & Tobacco Products; Computer & Electronic Products; and Furniture & Related Products. The two industries reporting contraction in January are: Textile Mills, and Nonmetallic Mineral Products.
The full report can be found here.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Capturing, recording equipment inspection data for FMEA
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Hypertherm Associates implements Rapyuta Robotics AMRs in warehouse
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI