- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Waterjet pump has redundant intensifier system
- June 7, 2010
- Product Release
- Waterjet Cutting
Jet Edge's iP60-50R waterjet pump has two intensifier systems. If one of the intensifier systems fails or requires service, the second intensifier system can continue operations until the intensifier pump can be shut down for service.
The pump produces 1.1 GPM of ultrahigh-pressure water for precision waterjet cutting, water blasting, cleaning, and surface preparation applications. It supports orifices up to 0.015 in.
The pump's tie-rod design has no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder, helping to prevent cracking. Matched-metal components prevent galling of hydraulic system components.
Hydraulic accumulators reduce wear on the hydraulic pump. Hydraulic fluid also is cooled and filtered. A hydraulic center section incorporates a high duty cycle-rated piston seal and wear rings. Attenuators smooth pressure fluctuations and deliver a constant and steady stream of ultrahigh pressure water to the cutting tool.
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI