Magnets hold stock using inside and outside edges

Strong Hand Tools® has introduced inside/outside angle magnets. Depending on the setup of each substructure, either the inside or outside surface of the magnets can be used. For inside welds, the magnets hold stock from the outside; for outside welds, they hold stock from the inside.

The magnets hold and position sheet metal; round pipes; and square, angled, and flat stock. They are fully enclosed for simple cleaning, and a narrow profile allows them to be used in tight spots.

The MLA series magnets can be adjusted from 30 to 270 degrees using an Allen wrench. Two or more magnets can be linked for use as fixturing elements.