The Tube & Pipe Journal®

June 2014

TPJ - The Tube & Pipe Journal® became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry and it has become the most trusted source of information for tube and pipe professionals. Subscriptions are free to qualified tube and pipe professionals in North America.


More Info Subscribe Free

Selected articles from the June 2014 issue available online:

Fabricator/entrepreneur makes the most of everything Texas has to offer

June 16, 2014

By:

Native Texan and farmer Aggie Devin Gerland earned a degree in agricultural engineering and took a succession of engineering positions in and around Bryan, Texas. Now an entrepreneur with his own fabrication shop, Gerland is putting his farming and ranching experience to work, developing his own line of farm implements.

Continue Reading

TUBE® expo exhibitors demonstrate the latest equipment for monitoring dimensions

June 9, 2014

By:

The manufacturing standards for manufacturing and fabricating tube and pipe are continuously on the rise as OEMs demand tighter tolerances and ever-greater dimensional consistency. Keeping up with these trends is a matter of keeping up with the technologies available to monitor processes and measure tubular products.

Continue Reading

Bending tube greener and cleaner

June 9, 2014

By:

For many, ideas such as green and sustainability are synonymous with recycling, but recycling is just one small part of doing things in a greener way. Minimizing the consumption that later needs to be recycled (waste) is an important aspect, too. Among tube and pipe fabricators, one area that can yield big benefits is lubricant consumption.

Continue Reading

Inverter helps manufacturer achieve improved arc starts, arc control

June 2, 2014

By:

The welders at JATCO Environmental Inc., a manufacturer of steam-to-liquids condensers for natural gas extraction, had a problem with striking and maintaining a good arc. When the company switched from a rectifier-based unit to an inverter-based unit, the welders found that the arc starts and weld characteristics were greatly improved.

Continue Reading