Selected articles from the October 2003 issue available online:

Material handling safety

October 23, 2003

By:

Handling material is a daily function in the workplace. All too often it is a task taken for granted, with little knowledge of or attention to the consequences if done incorrectly. Management and employees need to look at and evaluate how material goods are handled inside and outside their facilities. Whether the operation involves delivering or receiving material, an area should be designated for that purpose.

Continue Reading

Tube Hydroforming Design Flexibility—Part IV

October 23, 2003

By:

Material selection is a very important aspect of design flexibility when striving to fulfill part functionality requirements. Choosing the correct material is fundamental to making the part effectively and efficiently. The way a material is formed and the conditions it needs to withstand for...

Continue Reading

Blast Cleaning Equipment: What you need to know before buying

October 23, 2003

By:

If you are a fabricator of metal parts that need to be primed or painted, then you more than likely will have to prepare the part surface before finishing to produce the desired end result.

Continue Reading

Using a gel-type tube lube

October 23, 2003

By:

As one manufacturer of automotive exhaust assemblies recently discovered, selecting the most appropriate lubricant for a tube bending operation can have a dramatic impact on part quality, workplace cleanliness, and economic efficiency. Although the liquid lubricant it was using was reliable and...

Continue Reading

Shedding light on negativity—Part 1

October 9, 2003

By:

Read Part II. Are you a negaholic—someone who almost always sees the glass as half or totally empty? Do you live or work with one? If you answered, "No" to both of these questions, I'd like to know what planet you live on.These days—which are rife with economic uncertainty,...

Continue Reading

Promoting back safety—one company's approach

October 9, 2003

By:

Over the years, our midsize company, Aeroglide Corp., has used numerous methods to battle back injuries. We have tracked injuries in five-year increments and developed battle plans based on the trends we've observed.Dealing with InjuriesWe noticed that very few of the injuries were serious strains....

Continue Reading

Controlling bend angles

October 9, 2003

By:

Bend angles are among the most frustrating geometric features to control in metal stamping. This is due primarily to two factors – the inconsistency of the mechanical properties in the metal being bent and the die design.

Continue Reading