<?xml version="1.0" encoding="utf-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" version="2.0">
  <channel>
    <title><![CDATA[Latest "Safety" Products on The Fabricator]]></title>
    <link>http://www.thefabricator.com/view/productlist</link>
    <description><![CDATA[]]></description>
    <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    <lastBuildDate>Sun, 21 Mar 2010 01:00:08 +0000</lastBuildDate>
    <generator>Zend_Feed</generator>
    <language>en-us</language>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <item>
      <title><![CDATA[Small footprint dust, fume collection system available in units up to 10,000 CFM]]></title>
      <link>http://www.thefabricator.com/product/safety/small-footprint-dust-fume-collection-system-available-in-units-up-to-10000-cfm</link>
      <guid>http://www.thefabricator.com/product/safety/small-footprint-dust-fume-collection-system-available-in-units-up-to-10000-cfm</guid>
      <description><![CDATA[The Torit&amp;reg; PowerCore&amp;reg; TG series from Donaldson Co. Inc. is designed for the collection of dust generated in thermal processes, such as welding, laser cutting, plasma cutting, and thermal spray application. It has a footprint that is up to 65 percent smaller than most cartridge collectors and is available in units up to 10,000 CFM. The unit's compact filter packs are accessible through one large door, and quick-release latches provide immediate access; no tools are required. One offset-stack filter pack can replace up to three traditional cartridge filters, according to the company. The filter packs use flame-retardant Ultra-Web&amp;reg; media, which incorporates a layer of nanofiber designed to intercept even small dust and fume particles at the surface of the media flutes. Fluted channels are alternately sealed, allowing air to enter through an open flute and forcing it to exit through an adjacent flute.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Hard hat respiratory system retrofits to welding helmets]]></title>
      <link>http://www.thefabricator.com/product/safety/hard-hat-respiratory-system-retrofits-to-welding-helmets</link>
      <guid>http://www.thefabricator.com/product/safety/hard-hat-respiratory-system-retrofits-to-welding-helmets</guid>
      <description><![CDATA[ArcOne's&amp;reg; new Clean-Air Flow&amp;trade; respiratory system with hard hat is the first of its kind allowing welders to retrofit any ArcOne welding helmet into a hard hat respiratory system, the company says. Available in different configurations, the system has been developed from the ground-up incorporating longer battery life; quick-charging batteries; smart chargers; audible alarms for low battery and clogged filters; a stronger blower motor; varying speed adjustments; automatic speed changes as filters become clogged; single P3 cartridges; ergonomic belts; and comfortable hard-hat protection.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Redesigned safety glasses come in eight different configurations]]></title>
      <link>http://www.thefabricator.com/product/safety/redesigned-safety-glasses-come-in-eight-different-configurations</link>
      <guid>http://www.thefabricator.com/product/safety/redesigned-safety-glasses-come-in-eight-different-configurations</guid>
      <description><![CDATA[ArcOne's&amp;reg; redesigned 5000 Series safety glasses combine style and comfort in a lightweight frame. The 5000 series comes in eight different configurations including IR3 and IR5 for cutting, and polarized for outdoor activities. Outdoor mirrored versions are available in ice blue, red Revo, and silver.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Power press safety sign comes in two sizes]]></title>
      <link>http://www.thefabricator.com/product/safety/power-press-safety-sign-comes-in-two-sizes</link>
      <guid>http://www.thefabricator.com/product/safety/power-press-safety-sign-comes-in-two-sizes</guid>
      <description><![CDATA[Danray Products LLC has released a new safety sign for power presses. Registered with the U.S. copyright office, the sign addresses the main safety hazards created by moving slides and dies on power presses.The adhesive sign can be applied to mechanical, hydraulic, direct-drive (servo), and pneumatic power presses. It is available in sizes of 5 by 6 in. and 8-3/4 by 10-1/2 in.The sign has been designed to comply with OSHA 29 CFR 1910.145 and the ANSI Z535 standards for the design, application, and use of signs, colors, and symbols for accident prevention.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Midsize mist collector produces 1,200 CFM of air cleaning power]]></title>
      <link>http://www.thefabricator.com/product/safety/midsize-mist-collector-produces-1200-cfm-of-air-cleaning-power</link>
      <guid>http://www.thefabricator.com/product/safety/midsize-mist-collector-produces-1200-cfm-of-air-cleaning-power</guid>
      <description><![CDATA[Micro Air has added a midsize mist collector to its recently introduced line of MistMax&amp;trade; high-efficiency mist collectors. The new MM1200 uses a 5-HP blower to produce 1,200 CFM of air cleaning power at a sound level of 74.5 dBA at 5 ft.Patented filters are included in the package and offer filter efficiency of 99.98 percent. The manufacturer reports tested filter life up to five years.The compact footprint of 25 by 25 in. allows the unit to fit into confined areas and is suitable for multiple-station applications. Several options are available, including the IntelliTouch&amp;trade; control panel.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Automated barrier door prevents entry into robotic welding machine area]]></title>
      <link>http://www.thefabricator.com/product/safety/automated-barrier-door-prevents-entry-into-robotic-welding-machine-area</link>
      <guid>http://www.thefabricator.com/product/safety/automated-barrier-door-prevents-entry-into-robotic-welding-machine-area</guid>
      <description><![CDATA[Frommelt Safety Products offers the Slimline automated barrier door for robotic welding applications. The unit helps eliminate weld flash and flying debris and prevents entry into the machine area.The door can open in 1 to 2 sec. for most applications. Category 4 noncontact safety switches provide communication between the door and controls to ensure the guard is in the down position before welding can start.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[OSHA, ANSI compliant safeguarding systems developed for power presses, press brakes]]></title>
      <link>http://www.thefabricator.com/product/safety/osha-ansi-compliant-safeguarding-systems-developed-for-power-presses-press-brakes</link>
      <guid>http://www.thefabricator.com/product/safety/osha-ansi-compliant-safeguarding-systems-developed-for-power-presses-press-brakes</guid>
      <description><![CDATA[The SSC-1500 dual-microprocessor-based control system and the SSC-3000 solid-state press automation control system from Rockford Systems Inc. are safeguarding systems that comply with OSHA regulations and ANSI safety standards.The dual-microprocessor-based control system, featuring a larger keypad/display, is designed for use on part-revolution-clutch power presses and press brakes. It uses redundant inputs from devices such as palm buttons, foot switches, and light curtains to provide control reliability.  Standard, custom, and remote operator-style control boxes are available.The solid-state press automation control system features a larger color touchscreen and is designed for use on part-revolution-clutch mechanical power presses. It is a rack-mounted, modular control system with expandable options that permit changes to be made or features to be added or deleted as press requirements change. The standard control rack, furnished with a power supply module and a main CPU card, is designed to hold eight additional cards for expandable options.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Door interlock allows exit even when door is locked]]></title>
      <link>http://www.thefabricator.com/product/safety/door-interlock-allows-exit-even-when-door-is-locked</link>
      <guid>http://www.thefabricator.com/product/safety/door-interlock-allows-exit-even-when-door-is-locked</guid>
      <description><![CDATA[Fortress Interlocks' DM-I door interlock features an internal release mechanism that allows exit from a dangerous area, even when the door is locked.The unit is mounted on the outside of the guard, allowing normal entry and exit using a Fortress key. It is fitted to the doorpost and allows operators to enter through one access point and exit through another in multiaccess applications.The interlock features a large, red button that releases the door when depressed, even though the unit is still locked. The action also breaks dual safety circuits wired to the safety system of the machine to help ensure it stops. Once the operator has exited, the machine cannot restart until the interlock has been latched back into place and reset.The interlock can be mounted on many different panel thicknesses. Locks are available as standard units, which can hold up to 10 modules, or full stainless steel units, which can hold up to five modules. Both feature &amp;plusmn;5-degree fine adjustment.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Flashback arrester designed for medium gas consumption requirements]]></title>
      <link>http://www.thefabricator.com/product/safety/flashback-arrester-designed-for-medium-gas-consumption-requirements</link>
      <guid>http://www.thefabricator.com/product/safety/flashback-arrester-designed-for-medium-gas-consumption-requirements</guid>
      <description><![CDATA[Witt-Gastechnik offers 85-20, a flashback arrester for medium gas consumption requirements in gas welding, cutting, and burning applications. It delivers up to 1,589 SCFH for acetylene and other oxyfuel gases.The arrester measures about 5.1 in. long and 2.4 in. in diameter. Two versions are available: one with a box nut for connection to tapping points and one with a female thread for installation into pipes.The arrester prevents the formation and ignition of explosive gases with the triple protection of a gas nonreturn valve, a flame arrester, and a cutoff valve.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Storage, dispensing system designed for corrosive chemicals, abrasive fluids]]></title>
      <link>http://www.thefabricator.com/product/safety/storage-dispensing-system-designed-for-corrosive-chemicals-abrasive-fluids</link>
      <guid>http://www.thefabricator.com/product/safety/storage-dispensing-system-designed-for-corrosive-chemicals-abrasive-fluids</guid>
      <description><![CDATA[The IFH Group now offers a Special Product Package version of its fluid storage and dispensing system for lubricant storage.The package is designed for applications involving corrosive chemicals and other abrasive fluids that require special handling for safety and efficiency. The standard PVC sight gauge on the front of the steel containers is replaced with a Glass Sight Gauge equipped with ball check fittings at both ends. Underneath the containers are &Acirc;&frac34;-in. NPT fittings and flex steel hose for resistance to fluids that may damage the PVC hose on standard IFH systems.The Special Product Package can be supplied with new IFH fluid storage and dispensing systems or as a retrofit to existing systems.]]></description>
      <pubDate>Sun, 21 Mar 2010 01:00:08 +0000</pubDate>
    </item>
  </channel>
</rss>
