Found 9 results for "Davi Inc."...
Just show me:
March 6, 2013
Four-roll machine's overhead support lifts 100 tons
Davi has supplied a four-roll machine that it says is the largest in the world with the heaviest overhead support ever made.
The overhead support is able to lift 100 tons — the equivalent of an Airbus 330.
January 24, 2013
Davi earns highest quality degree from ThyssenKrupp
Following annual supplier evaluations, ThyssenKrupp has assigned an A rating, the highest supplier degree, to Davi, Dallas.
ThyssenKrupp purchased four Davi plate rolls in 10 years for its facility in South America. The company uses the... Read more...
October 23, 2012
Davi delivers large-capacity plate roll to wind tower manufacturer
Davi has installed a four-roll plate roller with a capacity of 4,000 by 145 mm at Bladt, Denmark's largest wind energy fabricating company. The machine cold-rolls monopiles for offshore wind towers.
The machine is automated via iRoll,... Read more...
July 24, 2012
Davi completes production of heaviest plate roll
Dallas-based Davi has manufactured and commissioned what it says is the heaviest four-roll machine ever built. The 13.12-ft. by 10-in. machine was dismantled and delivered to the customer via 17 trucks. It will be used for the production of... Read more...
December 9, 2011
Los rodillos para placa siguen rolando placa más pesada
Las máquinas de la actualidad están hechas para rolar en frío placa bastante gruesa. Aquí, se está probando una máquina rolando en frío una placa de 8 pulgadas de espesor. Ahora se han construido algunas máquinas para... Read more...
June 2, 2011
Plate rolls keep rolling heavier plate
Today’s machines are rated to cold-roll seriously thick plate. Here, a machine is being tested to roll 8-in.-thick plate cold. Some machines today have been built to cold-roll up to 11-in.-thick plate. Photo courtesy of... Read more...
January 13, 2009
EuroBLECH 2008: A celebration of metal fabricating and forming
What does a European metal fabricating and forming tradeshow mean for a U.S. fabricator? Apparently, a whole lot.
"It means everything. It has influenced who we are," said Don Begneaud, speaking about his company, BEGNEAUD Manufacturing, in... Read more...
January 15, 2008
Figure 1 A double-beam folding machine can bend heavy-gauge material both in the positive and negative directions. A 4- by 4-foot, 1/4-inch-thick plate can weigh more than 113 pounds. Even a 4- by 4-ft., 3/16-in.-thick plate can weigh more... Read more...
October 9, 2007
Dealing with Mother Nature's wrath
Protecting a two-mile-long, 10-lane bridge from earthquake damage is not an easy task. Replacing the eastern span of the San Francisco-Oakland Bay Bridge requires the talent and time of numerous design firms and fabricators and tens of... Read more...