|
PennEngineering Showroom |
|
PennEngineering - Related
Found 41 results for "PennEngineering"...
Just show me: Everything | Articles | News | Products
-
Self-clinching, flush-head studs made for thin stainless steel assemblies
Product
April 29, 2013
PEM® Type FHP™ self-clinching, flush-head studs from PennEngineering® install permanently into thin stainless steel sheets for attachment applications requiring corrosion resistance. They help contribute to thinner, lighter designs for... Read more... -
Self-clinching fasteners enable permanent flush joining of two sheets
Product
February 12, 2013
PEM® SpotFast® self-clinching fasteners from PennEngineering® enable two sheets to be joined permanently in a flush-attachment connection without protrusions on either side. They can be used to attach two metal sheets too thin to weld, fasten... Read more... -
PennEngineering appoints new field staff
News
February 4, 2013
Fastener manufacturer PennEngineering®, Danboro, Pa., has announced several appointments to its field staff. Matthew Llewellyn has been named territory manager for the U.K. and Ireland, and Matthias Kreuter becomes key account... Read more... -
Tool converts round holes to hexagonal for insert installation
Product
January 21, 2013
The new ATLAS® RIV 990 hexcutter tool from PennEngineering® is engineered to convert predrilled round holes to hexagonal holes for installation of full- or half-hex-bodied, blind threaded inserts. The tool operates on 90-PSI air... Read more... -
The lowdown on lean fastening
Article
January 7, 2013
Figure 1 This system feeds fasteners to a stamping press for in-die fastening, allowing stamping and fastener installation to be performed simultaneously in the die. While fabricators may quickly recognize the value in taking... Read more... -
Self-clinching pilot pins designed for positioning, alignment applications
Product
October 22, 2012
PEM® self-clinching pilot pins, offered in several variations by PennEngineering®, are designed for positioning, alignment, and pivot applications. Once installed in thin metal sheet, they become permanent parts of an assembly. Type... Read more... -
App provides fastener installation dimensions
Product
August 28, 2012
PennEngineering® has launched the new PEMspec™ app for the iPhone® and iPad®. It is available for free download in the iTunes® app store. The app is designed to enable users to access critical installation dimensions for a selected PEM®... Read more... -
Fasteners' nylon insert prevents threaded mating hardware from loosening
Product
June 26, 2012
PEM® nylon insert, self-locking fasteners from PennEngineering® provide a reusable, nonmetallic prevailing torque thread lock to prevent threaded mating hardware from loosening in service because of vibration or other application-related... Read more... -
Large-diameter stud heads help reduce stress on panels
Product
May 24, 2012
PEM® self-clinching studs from PennEngineering® are designed with large-diameter heads for heavy-duty attachment applications. The enlarged, nonflush stud head distributes axial tightening force over a large area to reduce compressive... Read more... -
New blind threaded insert installation methods added to tool line
Product
April 23, 2012
Atlas® tools for installing blind threaded inserts are now available from PennEngineering® in spin-spin, pull-to-pressure, pull-to-stroke, or combination versions to install steel, brass, aluminum, or stainless steel blind threaded inserts... Read more... -
Robotic capabilities allow hands-off installation of self-clinching fasteners
Product
March 28, 2012
Clear Automation and PennEngineering® have introduced robotic capabilities engineered for the PEMSERTER® Series 3000™ fastener-installation press. The system allows hands-off installation of self-clinching fasteners. The system picks up,... Read more... -
Tooling installs self-clinching nuts in aluminum without prepunching
Product
March 12, 2012
PennEngineering® has introduced PEMSERTER® tooling that can install PEM® Type S self-clinching nuts permanently in thin aluminum sheets without the need to prepunch a mounting hole in a separate operation. The tooling and fastener pierce... Read more... -
Fasteners enable sheet-to-sheet attachment without screws
Product
February 16, 2012
PennEngineering®'s new microPEM™ TackPin™ (Type T™) fasteners for compact electronic assemblies enable sheet-to-sheet attachment in applications that do not require disassembly. The aluminum fasteners install into properly sized... Read more... -
Concealed-head studs provide strong, permanent, reusable threads for thin-metal assembly
Product
February 7, 2012
PEM® self-clinching, concealed-head studs and standoffs from PennEngineering® provide strong, permanent, reusable threads for mating hardware in thin-metal assembly applications. Their design allows the side of the sheet opposite... Read more... -
Captive panel screws suitable for assemblies that may require subsequent access
Product
October 31, 2011
PEM® C.A.P.S.® captive panel screws from PennEngineering® integrate a captive screw with an anti-cross-threading feature and a PC/ABS colored knob to provide a fastener system for assemblies that may require subsequent access. The... Read more... -
PennEngineering named official licensee for REMINC
News
October 17, 2011
PennEngineering®, a manufacturer of fasteners for electronics, industrial, and aerospace applications in Danboro, Pa., has been named as an official Research Engineering & Manufacturing Inc. (REMINC) licensee for TRILOBULAR™ and REMFORM™... Read more... -
In-die fastener feeding system eliminates secondary operation
Product
September 8, 2011
PennEngineering®'s PEMSERTER® in-die fastener-feeding system is engineered to install self-clinching nuts, studs, and standoffs in assemblies during the stamping process. Working in tandem with a stamping press and properly tooled die to... Read more... -
Captive panel screws have two distinct mounting styles
Product
August 9, 2011
New PEM® PF7M™ and PF7MF™ captive panel screws from PennEngineering® have two distinct mounting styles for permanent installation into thin sheets. Both types feature small, compact, low-profile designs suited for limited-access areas.... Read more... -
Blind threaded insert installation tool has autoreverse mode to prevent overinstalling, double installing
Product
June 27, 2011
The new ATLAS® AE938 tool for installing blind threaded inserts, available from PennEngineering®, features pressure-controlled setting for installation of the same insert type into various material thicknesses without adjustment. A... Read more... -
PennEngineering names western U.S. distributor
News
May 9, 2011
PennEngineering®, Danboro, Pa., has expanded its network of authorized distributors for PEM® fastener products in the western U.S. Aero-Space Southwest Inc., Phoenix, which has been franchised in Arizona, New Mexico, and Mexico, now is an... Read more... -
PennEngineering awarded license for patented drive system
News
March 7, 2011
PennEngineering®, Danboro, Pa., has been awarded a license from Phillips Screw Co. for its patented MORTORQ® Super spiral drive system. The proprietary drive system was developed to deliver high torque for fasteners without damaging screw... Read more... -
Swaging collar studs attach dissimilar panel materials, multiple panels
Product
February 28, 2011
New PEM® Type SGPC™ swaging collar studs from PennEngineering® are designed to attach dissimilar panel materials and multiple panels. They can accommodate most panel materials, including stainless steel, and exhibit strong torque-out... Read more... -
Automatic fastener-installation press performs without hydraulics
Product
January 31, 2011
The PEMSERTER® Series 3000™ automatic fastener-installation press system from PennEngineering® performs without hydraulics to install all types of self-clinching fasteners in thin metal sheets. The custom-built, fully... Read more... -
Small-screw insertion system re-engineered to accommodate interchangeable nose assemblies
Product
October 11, 2010
PennEngineering®'s PEM® StickScrew® system for small-screw insertion has been re-engineered with a new StickShooter™ driver, offering the capability to accommodate interchangeable nose assemblies and allow for quick tooling changeover.... Read more... -
Self-clinching standoff fasteners designed for spacing, stacking applications in compact electronic assemblies
Product
July 12, 2010
New PEM® micro self-clinching standoff fasteners from PennEngineering® are designed for spacing or stacking applications in compact electronic assemblies. Type MSO4™ micro self-clinching standoffs are manufactured from 400 series... Read more... -
PennEngineering appoints two sales associates
News
June 21, 2010
Fastener manufacturer PennEngineering®, Danboro, Pa., has named Austin Washington as global accounts manager for the company and Jeff Rindskopf as director of sales for 3V Fasteners Co. Inc., a subsidiary of parent PennEngineering.... Read more... -
One-piece captive screw allows for quick attachment, reduces need for loose fasteners
Product
June 7, 2010
PennEngineering®'s PEM® spinning clinch bolt for thin metal panels now comes in a one-piece captive screw style. Its controlled clinching action during installation permanently captivates the screw while allowing it to spin freely in... Read more... -
Fasteners designed for thin metal parts requiring repeatable pivoting, hinging action
Product
December 16, 2008
PEM® SpotFast® fasteners, paired with a specially designed wave washer, allow attachment of two thin metal parts in applications requiring repeatable pivoting or hinging action. These self-clinching fasteners (Type SFW) from... Read more... -
PennEngineering®, Pencom announce settlement agreement
News
December 16, 2008
Penn Eng. & Mfg., Danboro, Pa., and Peninsula Components Inc., San Carlos, Calif., have announced a settlement agreement of PennEngineering's lawsuit against Pencom for infringement of certain patents and trademarks. The original complaint was... Read more... -
PennEngineering names global product manager-new products
News
October 14, 2008
PennEngineering®, Danboro, Pa., has promoted Jay McKenna to the newly created position of global product manager-new products. McKenna directs the development and worldwide launch of new PEM® fastener products; oversees and monitors new... Read more... -
Automatic fastener installation press allows quick tool changes
Product
May 13, 2008
The PEMSERTER® Series 2000® automatic press accommodates a dual-bowl option and QX™ turret tool system to allow quick changes between anvil tools while installing different types of self-clinching fasteners. With the second bowl and... Read more... -
Fastener-installation press introduced
Product
January 15, 2008
The new PEMSERTER® series 3000™l automatic fastener-installation press has been introduced by PennEngineering. According to the manufacturer, the press can install self-clinching fasteners up to 30 percent faster than traditional... Read more... -
PennEngineering files complaints against fastener manufacturers
News
December 11, 2007
PennEngineering®, Danboro, Pa., has served complaints on six fastener manufacturers that attended the National Industrial Fastener Show/West in Las Vegas in November. The complaint alleges that the six companies, four Chinese, one Taiwanese,... Read more... -
Press manually installs self-clinching fasteners
Product
May 8, 2007
The PEMSERTER® Series 4® manual press can install self-clinching fasteners in applications in which automated systems would be impractical. The pneumatic-powered press uses shop air. An 18-in. (45.7 cm) throat depth provides clearance... Read more... -
PennEngineering hires global vice president, sales/marketing
News
May 8, 2007
PennEngineering® has appointed Chris Marx as global vice president of sales and marketing. In his new position, Marx oversees the company's worldwide sales and marketing functions. Marx has extensive sales and marketing experience in the... Read more... -
Fastener-installation press system enhanced
Product
August 8, 2006
The upgraded PEMSERTER® Series 2000® automatic fastener-installation press system from PennEngineering® installs all types of self-clinching fasteners permanently in thin-metal sheets. New features include job search and recall mode... Read more... -
Self-clinching threaded standoffs allow installation close to edges
Product
February 7, 2006
PEM® type DSOS self-clinching threaded standoffs from PennEngineering® can be installed close to edges in thin metal sheet and offer a method to stack or space components in an assembly. They are suitable where space for fastening... Read more... -
In-die fastener-feeding system installs nuts, studs, standoffs
Product
November 8, 2005
The PEMSERTER® in-die fastener-feeding system from PennEngineering® Fastening Technologies, which consists of die tooling, fastener-feeding, and die-sensing systems, installs self-clinching nuts, studs, and standoffs in assemblies during... Read more... -
Self-locking nuts install close to edge in thin sheets
Product
August 9, 2005
PEM® self-locking nuts from PennEngineering® enable permanent installation close to edges in metal sheets as thin as 0.036 in. (0.91 mm). Available in thread sizes #4-40 and M3, the steel fasteners have reusable locking threads and are... Read more... -
Fastener drawings can be inserted into common CAD systems
Product
September 14, 2004
All online CAD drawings for PennEngineering® Fastening Technologies' entire line of fastener products now can be inserted directly into many CAD systems. No download or importing is required. The new tool allows designers to insert drawings... Read more... -
All-metal floating panel nuts position, spin freely
Product
May 4, 2004
PennEngineering® Fastening Technologies offers PEM® floating panel nuts designed to position and spin freely upon installation into any type of rigid material. The all-metal threaded nuts are custom-designed for specific applications and... Read more...
