Schwarze-Robitec GmbH Showroom
|
|
Schwarze-Robitec GmbH - Related
Found 11 results for "Schwarze-Robitec GmbH"...
Just show me: Everything | Articles | News | Products
-
Tube bending machine produces small radii for shipbuilding, offshore plant construction
Product
April 22, 2013
Schwarze-Robitec offers the CNC 320 HD tube bending machine. The unit allows extremely small bending radii (1.5 x D), even for large tubes and pipes with very thin walls and diameters up to 12.75 in. The machine is suitable for use in the... Read more... -
Trilogy takes over representation of Schwarze-Robitec in North America
News
April 18, 2013
Schwarze-Robitec, Cologne, Germany, has named Trilogy Machinery Inc., Belcamp, Md., as the exclusive North American representative for its tube and pipe cold bending systems for the automotive, shipbuilding and offshore, chemical, and power plant... Read more... -
Optical measuring system integrates into tube bending tool
Product
December 3, 2012
Schwarze-Robitec has developed the Springmatic optical measuring system. Integrated into a bending tool, it measures bent tubes directly while tensioned on the bending machine and either starts the required bending process or saves the... Read more... -
Cold bending machine processes large quantities with short setup times
Product
October 22, 2012
Schwarze-Robitec offers the CNC 220 HD MW tube and profile cold bending machine. It is designed for bending large quantities of many different tube types, such as for shipbuilding, chemical industry, or power plant construction applications.... Read more... -
Tips for buying a second-hand bending machine
Article
September 10, 2012
A smaller investment and adequate production capacity—the arguments for buying a second-hand machine are obvious. Is it that simple though? Particularly in the case of complex tube bending machines, many factors determine the efficiency of... Read more... -
Update from Germany
Article
June 13, 2012
“Oil and gas are the drivers right now,” said Karl Kunkel, global strategy director for Quaker Chemical Corp., commenting on the state of the tube and pipe industry. Quaker’s position as a global supplier of metalworking process fluids... Read more... -
Separator integrated into bending tool to reduce tube cutting waste
Product
April 23, 2012
Schwarze-Robitec has developed a new separator integrated directly into the bending tool for bending and separating in one stage. To allow bending of short components, the parts to be bent generally are extended artificially with span and... Read more... -
When a good tube bends bad - Part II
Article
April 11, 2006
Editor's note: This is the second part of a two-part article that examines tube bending defects, possible causes, and suggested remedies. Part I discusses surface defects; Part II covers other defects, such as wall thinning, ovality, buckling,... Read more... -
When a good tube bends bad
Article
April 11, 2006
Editor's note: "When a good tube bends bad" is a two-part article that examines tube bending defects, possible causes, and suggested remedies. Part I discusses surface defects; Part II covers other defects, such as wall thinning, ovality,... Read more... -
When a good tube bends bad - Part I
Article
March 7, 2006
The clamp used to bend this 16-gauge, 3-in.-OD aluminized steel tube slipped about 2 in. at about 75 degrees into the bend. The clamp continued to move forward, but the material did not, causing the slippage marks (horizontal lines) and... Read more... -
Managing rotary-draw tube bending
Article
March 8, 2005
Most information published about tube bending relates to a specific aspect of the process, such as tooling, control and equipment features, or component technology. This type of information is valuable for keeping tube fabricators... Read more...
