Content tagged with "cosmetic"
Results: 6
Article
January 29, 2004
Article
December 11, 2003
Filling in the blanks
Because of sluggish economies and uncertain markets, the need to hone a competitive edge is more sharply defined. Many stampers are doing this by taking control of their material inventory and production schedules by adding a cut-to-length blank shearing line. An in-house blank... Read more...
Article
September 25, 2003
The wrinkle-wiper for tube bends
Figure 1 Here's a quick quiz for you to take: What "wipes" the wrinkles from the bend in a tube and is one of the five pieces of tooling in a die set? If you guessed wiper die, you're right. A piece of tooling used to keep the inside bend of a tube from wrinkling, a wiper die... Read more...
Article
December 13, 2001
Pairing a servo feed with a pull-through straightener
Servo feeds have been in use for many years now. People have become comfortable with this technology and it is becoming commonplace. What is not commonplace is the knowledge that servo feeds can be used with pull-through straighteners as opposed to a conventional feed line that uses a... Read more...
Article
November 29, 2001
Using existing tooling for new product applications
Figure 1: This design is typical for the last fin pass for low-carbon steel using high-frequency welding. "In turbulent times, one must be innovative or be rendered defenseless." Peter Drucker said these words when addressing the Steel Service Center Institute several years ago, and... Read more...
Article
February 19, 2001
Designing for successful robotic arc welding automation
This dual robot system uses a large "Ferris Wheel" positioner to give the robots access to the underside of the parts to be welded. Automated robotic arc welding systems are used in all types of manufacturing. They can provide several benefits in certain welding applications. The... Read more...
Didn't find what you were looking for? Try our search page to refine your results
