The FABRICATORSTAMPING JournalPractical Welding TodayTube & Pipe Journalthefabricator.comCanadian Industry ManufacturingGreen ManufacturerPWT TVTPJ TV

 
Assembly Tech Cell - News
Home \ Assembly \ News

Assembly News

Results: 50

EFG acquires Landreth Fastener's cold heading segment

Published: November 27, 2011
Tech Cell: Assembly

Elgin Fastener Group LLC (EFG), Versailles, Ind., has acquired the cold heading segment of Landreth Fastener Corp., a 35,000-sq.-ft. manufacturing...

Caplugs featured on worlds greatest program

Published: November 21, 2011
Tech Cell: Tube and Pipe Fabrication, Assembly

Caplugs, Buffalo, N.Y., was featured on the Nov. 11, 2011, episode of "World's Greatest!...", a syndicated television program that airs on...

Elgin Fastener Group announces new staff assignments

Published: November 21, 2011
Tech Cell: Assembly

Two divisions of the Elgin Fastener Group have assigned individuals to new positions in their quality control departments. Chandler Products,...

PennEngineering named official licensee for REMINC

Published: October 17, 2011
Tech Cell: Assembly

PennEngineering®, a manufacturer of fasteners for electronics, industrial, and aerospace applications in Danboro, Pa., has been named as an...

Leland Powell hires quality manager

Published: September 26, 2011
Tech Cell: Assembly

Leland Powell Fasteners Inc., Martin, Tenn., has named Greg Cool as its new quality assurance manager. He has 29 years of experience in...

Atlas Copco named among most innovative by Forbes

Published: September 19, 2011
Tech Cell: Assembly, Power Tools

Atlas Copco, Rock Hill, S.C., has been ranked No. 67 on the list of Top 100 most innovative companies in the world by Forbes magazine....

PennEngineering names western U.S. distributor

Published: May 9, 2011
Tech Cell: Assembly

PennEngineering®, Danboro, Pa., has expanded its network of authorized distributors for PEM® fastener products in the western U.S. Aero-Space...

Ohio Rod Products announces changes to inside sales staff

Published: May 2, 2011
Tech Cell: Assembly

Ohio Rod Products, a division of Elgin Fastener Group in Versailles, Ind., has promoted Ryan Detmer to the position of inside sales supervisor....

Tramec LLC acquires Hill Fastener Corp.

Published: April 5, 2011
Tech Cell: Assembly

Gary Sullo, president of Tramec LLC, Iola, Kan., has announced that Tramec has acquired Hill Fastener Corp. located in Rock Falls, Ill., owned by...

Elgin Fastener Group expands through acquisition

Published: March 14, 2011
Tech Cell: Assembly

Elgin Fastener Group has announced the latest addition to its expanding production capabilities through the acquisition of Silo Fasteners, Kansas...

PennEngineering awarded license for patented drive system

Published: March 7, 2011
Tech Cell: Assembly

PennEngineering®, Danboro, Pa., has been awarded a license from Phillips Screw Co. for its patented MORTORQ® Super spiral drive system. The...

Ohio Rod Products announces promotions

Published: February 28, 2011
Tech Cell: Assembly

Elgin Fastener Group, Versailles, Ind., has promoted two members of its Ohio Rod Products division. Joe Johannigman has been named accounting...

Orbitform owner elected to Michigan State House of Representatives

Published: November 8, 2010
Tech Cell: Assembly

Mike Shirkey, owner of Jackson, Mich.-based Orbitform Group, which designs and builds forming, fastening, joining, and assembly equipment,...

Panasonic Factory Solutions moves to new facilities

Published: September 27, 2010
Tech Cell: Assembly, Automation and Robotics, Arc Welding

Panasonic Factory Solutions Co. of America has moved into a new, dedicated demonstration and training facility in Buffalo Grove, Ill., and offices...

Elgin Fastener Group names vice president/quality

Published: September 13, 2010
Tech Cell: Assembly

Elgin Fastener Group, Versailles, Ind., has promoted Terry Elkins to the position of vice president/quality. Elkins joined the Ohio Rod...

National-Precision opens new facility in Utah

Published: July 26, 2010
Tech Cell: Assembly

National-Precision, a distributor of electronic hardware and fasteners based in Dallas, has opened a new facility in Salt Lake City, Utah. This is...

J.W. Winco wins second prize in business challenge

Published: July 12, 2010
Tech Cell: Assembly

J. W. Winco Inc., New Berlin, Wis., has won second prize in the "How I Got My Business out of Hot Water" business challenge from the Independent...

PennEngineering appoints two sales associates

Published: June 21, 2010
Tech Cell: Assembly

Fastener manufacturer PennEngineering®, Danboro, Pa., has named Austin Washington as global accounts manager for the company and Jeff...

Chandler Products announces personnel changes

Published: May 17, 2010
Tech Cell: Assembly

Chandler Products, Cleveland, has announced the retirement of Ron Siedler from the company. Siedler most recently served as the company's...

Emhart Teknologies acquires Fastener Innovation Technology

Published: May 3, 2010
Tech Cell: Assembly

Emhart Teknologies, a Black & Decker Company and producer of fastening and assembly technologies in Shelton, Conn., has acquired Fastener...

Elgin Fastener Group hires technical sales rep

Published: January 12, 2010
Tech Cell: Assembly

Elgin Fastener Group, Versailles, Ind., has announced the addition of Tim Mahan as a technical sales representative. He has 25 years of fastener...

Adept Technology hires director of global sales, marketing

Published: November 10, 2009
Tech Cell: Assembly, Automation and Robotics, Testing and Measuring

Adept Technology Inc., Pleasanton, Calif., has appointed Rush LaSelle as director of global sales and marketing. He is responsible for the...

Orbitform opens new applications lab

Published: November 10, 2009
Tech Cell: Arc Welding, Assembly, Resistance Welding, Roll Forming

Orbitform Group, Jackson, Mich., has announced additional capacity to provide prototype services for the assembly of parts within the new...

Elgin Fastener Group names VP of manufacturing

Published: November 10, 2009
Tech Cell: Assembly, Finishing, For Engineers

Elgin Fastener Group (EFG), Versailles, Ind., has promoted Phil King to the position of vice president of manufacturing. In this position, he...

Antidumping, countervailing duty cases filed against fastener imports from China and Taiwan

Published: September 24, 2009
Tech Cell: Assembly, Industry Trends and Analysis

On Sept. 23, Wiley Rein LLP filed antidumping and countervailing duty petitions with the U.S. Department of Commerce and the U.S. International...

Peddinghaus announces engineering promotions

Published: June 9, 2009
Tech Cell: Assembly, Bending, Metals/Materials, Press Technology, Punching, Sawing

Peddinghaus Corp. has announced the promotions of two senior engineers at its facility in Bradley, Ill. James Magnuson was named as vice...

Lomar Machine & Tool recognized by Eaton Corp.

Published: May 28, 2009
Tech Cell: Assembly, Testing and Measuring, Tube and Pipe Fabrication

Diversified industrial manufacturer Eaton Corp. honored 38 premier suppliers last month as part of the company's supplier recognition program....

Fastener Fair Stuttgart to move for 2009

Published: April 14, 2009
Tech Cell: Assembly

Following the success of Fastener Fair Stuttgart in September 2008, where 435 exhibitors from 37 countries met with 3,506 visitors from around the...

PennEngineering®, Pencom announce settlement agreement

Published: December 16, 2008
Tech Cell: Assembly, Automation and Robotics, Press Technology

Penn Eng. & Mfg., Danboro, Pa., and Peninsula Components Inc., San Carlos, Calif., have announced a settlement agreement of PennEngineering's...

PennEngineering names global product manager-new products

Published: October 14, 2008
Tech Cell: Assembly

PennEngineering®, Danboro, Pa., has promoted Jay McKenna to the newly created position of global product manager-new products. McKenna directs...

Peddinghaus event focuses on technology, industry partnerships

Published: August 12, 2008
Tech Cell: Assembly, Materials Handling, Punching, Sawing

Peddinghaus Corp. has announced plans to open its facility in Bradley, Ill., from Sept. 24-27 for its Oktoberfest 2008 event. The event celebrates...

Bosch Rexroth to acquire fluid filter manufacturer

Published: May 15, 2008
Tech Cell: Assembly, Automation and Robotics

Bosch Rexroth, Hoffman Estates, Ill., a provider of drive and control technologies from mechanics, hydraulics, and pneumatics to electronics and...

Genesee Group/NY Inc. changes name, organizational status

Published: April 15, 2008
Tech Cell: Assembly, Press Technology, Tool and Die

The Genesee Group/NY Inc., West Henrietta, N.Y., a contract manufacturer of metal components and assemblies for various industries, recently...

Bazz Houston acquires Connor Mfg. Services de Mexico

Published: April 15, 2008
Tech Cell: Assembly, Press Technology, Tool and Die

The Bazz Houston Co., Garden Grove, Calif., has purchased Connor Mfg. Services de Mexico. The two companies are completely integrated, and Bazz...

Balluff names business development support specialist

Published: April 15, 2008
Tech Cell: Assembly, Automation and Robotics

Balluff, Florence, Ky., has named Drew Stevens as business development support specialist for metal forming. Stevens, who directs the company's...

Jacobson Mfg. – Tiffin acquires Horizon Technology Group's Ohio location

Published: January 15, 2008
Tech Cell: Assembly

Jacobson Mfg. – Tiffin LLC, Medina, Ohio, an affiliate of Continental/Midland, Jacobson Mfg., MSD Stamping, and Minuteman Distribution, has...

Bayloff appoints CEO

Published: January 15, 2008
Tech Cell: Assembly, Finishing, Tool and Die

Bayloff Stamped Products, a third-generation, family-owned automotive stamping company, has appointed Tom Carey as CEO and president. Carey...

FABTECH hosts 31,000 visitors, covers 461,627 sq. ft.

Published: January 15, 2008
Tech Cell: Aluminum Welding, Arc Welding, Assembly, Bending, CAD/CAM Software, Coil Processing, Consumables, Cutting and Weld Prep, Finishing, Folding, Hydroforming, Laser Cutting, Laser Welding, Materials Handling, Oxyfuel Cutting, Power Tools, Plasma Cutting, Press Feeding, Press Technology, Punching, Repair and Field Welding, Resistance Welding, Automation and Robotics, Roll Forming, Safety, Sawing, Shearing, Shop Management, Testing and Measuring, Tool and Die, Tube and Pipe Fabrication, Tube and Pipe Production, Waterjet Cutting, Welding Inspection

The 2007 FABTECH® International & AWS Welding Show at McCormick Place in Chicago hosted more exhibiting companies and covered more exhibit...

PennEngineering files complaints against fastener manufacturers

Published: December 11, 2007
Tech Cell: Assembly

PennEngineering®, Danboro, Pa., has served complaints on six fastener manufacturers that attended the National Industrial Fastener Show/West...

FABTECH Intl. & AWS Welding Show returns to Chicago

Published: October 9, 2007
Tech Cell: Aluminum Welding, Arc Welding, Assembly, Bending, CAD/CAM Software, Coil Processing, Consumables, Cutting and Weld Prep, Finishing, Folding, Hydroforming, Laser Cutting, Laser Welding, Materials Handling, Oxyfuel Cutting, Power Tools, Plasma Cutting, Press Feeding, Press Technology, Punching, Automation and Robotics, Roll Forming, Safety, Sawing, Shearing, Shop Management, Testing and Measuring, Tool and Die, Tube and Pipe Fabrication, Tube and Pipe Production, Waterjet Cutting

The 2007 FABTECH® International & AWS Welding Show, the largest North American showcase of metal forming, fabricating, stamping, tube and...

ATI Industrial Automation opens new Detroit office

Published: October 9, 2007
Tech Cell: Assembly, Finishing, Metals/Materials, Automation and Robotics

ATI Industrial Automation, Apex, N.C., a developer of robotic peripheral equipment, recently opened a new office in Orion Township, Mich., near...

Misumi USA Inc. names president, expands marketing management team

Published: October 9, 2007
Tech Cell: Assembly, Testing and Measuring

Misumi USA Inc., Schaumburg, Ill., has appointed Masanori Suzuki as president. Previously Suzuki served as general manager of the strategic...

LAI named on Inc.list of fastest-growing companies

Published: October 9, 2007
Tech Cell: Assembly, Bending, Laser Cutting, Tube and Pipe Fabrication

Inc. Magazine named LAI Intl. Inc., Scottsdale, Ariz., a provider of contract manufacturing services, to its inaugural list of the 5,000...

Barnes Aerospace expands operations

Published: September 11, 2007
Tech Cell: Arc Welding, Assembly, Laser Cutting, Waterjet Cutting

Barnes Aerospace, Windsor, Conn., a division of Barnes Group Inc., has expanded its large fabrication operations in Ogden, Utah, with a...

BTD Manufacturing acquires Pro Engineering

Published: August 7, 2007
Tech Cell: Arc Welding, Assembly, Finishing, Press Technology

BTD Manufacturing Inc., Detroit Lakes, Minn., has acquired Pro Engineering, Minneapolis. The transaction involved an exchange of cash for assets....

Fastener Fair Stuttgart offers networking opportunities

Published: July 10, 2007
Tech Cell: Assembly

More than 350 exhibitors from 36 countries plan to host visitors at Fastener Fair Stuttgart 2007. The two-day event opens Sept. 19 at 9 a.m. at...

Bosch Rexroth launches new Web site

Published: May 8, 2007
Tech Cell: Assembly, Materials Handling, For Engineers

Bosch Rexroth has launched a new Web site intended to help automotive companies and their suppliers improve productivity, reliability, and...

PennEngineering hires global vice president, sales/marketing

Published: May 8, 2007
Tech Cell: Assembly

PennEngineering® has appointed Chris Marx as global vice president of sales and marketing. In his new position, Marx oversees the company's...

Textron names interim president/CEO

Published: December 12, 2006
Tech Cell: Assembly

Textron Inc., Troy, Mich., has named Joseph Gray as interim president and CEO for Textron Fastening Systems (TFS), which has been rebranded as...

ITW Red Head names engineering manager

Published: December 12, 2006
Tech Cell: Assembly

ITW Red Head, Wood Dale, Ill., has hired Bill Dubon as engineering manager. Dubon leads the product development process and engineering...