Assembly Products

Results: 47


Acrylic adhesive works on various substrates, including unprepared metals Publish date: March 5, 2010 Lord Corp. offers Maxlok™, a new acrylic adhesive developed to meet the need for a process-friendly adhesive that will work on various...

Workholding system's captured screw, dowel assemblies allow quick installation Publish date: October 13, 2009 Stevens Eng. Inc. and Big Kaiser Precision Tooling Inc. have introduced the Unilock starter kit workholding system. The kit allows users to plug...

Extruded-material tube fittings aimed at oil, gas, and chemical markets Publish date: October 13, 2009 The Instrumentation Products Div. of Parker Hannifin has developed a production process for its A-LOK® tube fittings based on stainless steel...

Remote compliance device corrects alignment errors in assembly applications Publish date: March 11, 2008 The Compensator, a remote center of compliance (RCC) device from ATI Industrial Automation, is designed to correct alignment errors with...

Pierce units are self-equalizing Publish date: August 8, 2006 Aries Eng. Co. Inc. offers the HyperPierce® self-equalizing press unit for high-production piercing and assembly. It incorporates...

Servo-press workstations can be customized Publish date: September 11, 2007 Promess Inc. has introduced a line of customizable servo-press workstations, based on the company's electromechanical assembly press (EMAP),...

Impact riveter sets solid rivets up to 7/16 in. diameter Publish date: September 12, 2006 Orbitform has introduced the HP2000 hydrapneumatic impact riveter. The 20-ton-capacity riveter available with up to a 24-in. throat autofeeds and...

Fastening process smooths, folds material into seamless, solid form Publish date: October 11, 2005 Orbitform has developed a new metal forming and joining process, Rollerforming, that uses multiple rollers mounted on a rotating spindle to gently...

Air press suitable for manual, semiautomatic assembly Publish date: August 8, 2006 AIM Joraco has introduced a direct air press to complement its Toggle-Aire® pneumatic presses for assembling bushings, posts, inserts, and...

Indexer performs assembly, inspection at up to 1,600 parts per hour Publish date: April 11, 2006 The Toggle-Aire® multistation indexer from AIM Joraco is pneumatically operated and programmable logic-controlled to perform parts assembly...

Heavy-duty turntables available in cast iron, stainless steel Publish date: July 11, 2006 SKF® Linear Motion & Precision Technologies has introduced its heavy-duty turntables operation in work and assembly stations, welding tables,...

Adhesive is alternative to welding on galvanized metals Publish date: January 10, 2006 Devcon offers its Flex Welder FC (fast cure) methacrylate adhesive and Dev-Thane 5 urethane adhesive as alternatives to welding on galvanized,...

Crimping machines accommodate both small and large assemblies Publish date: January 12, 2010 Lillbacka Powerco has introduced the Finn-Power 120 UC and 140 UC crimping machines for tube and pipe, hose assemblies, and other fastening and...

Heavy-duty shop press has adjustable hand winch for bed-height change, daylight control Publish date: December 16, 2008 Phoenix Hydraulic Presses recently produced a 25-ton, heavy-duty H-frame shop press to assemble spring-loaded cylinders. The press features an...

Clamps provide enhanced ergonomics, holding power Publish date: January 9, 2007 DE-STA-CO's Horizontal Handle Hold-Down Action Clamps (models 2013, 2017, 2027, and 2037) deliver 60 percent more holding capacity than the legacy...

Vertical-handle clamps save space Publish date: November 7, 2006 Vertical-handle hold-down action clamps from De-Sta-Co allow users to save space without compromising holding capacity. Available in 2002, 2007,...

Robot vision system option available Publish date: September 12, 2006 FANUC Robotics America has introduced the i RVision™ integrated robot vision option for the company's R-J3iC controller. The ready-to-use...

Robot handles welding, assembly, material handling Publish date: May 9, 2006 FANUC Robotics North America Inc. has introduced the R-2000iB multipurpose, intelligent robot that handles welding, assembly, part transfer,...

Cordless hammer drill designed for heavy-duty applications Publish date: July 13, 2004 Metabo Corp. has introduced the SBP 18 Plus cordless hammer drill for heavy-duty applications. The tool is suitable for a variety of materials,...

Fasteners designed for thin metal parts requiring repeatable pivoting, hinging action Publish date: December 16, 2008 PEM® SpotFast® fasteners, paired with a specially designed wave washer, allow attachment of two thin metal parts in applications requiring...

Automatic fastener installation press allows quick tool changes Publish date: May 13, 2008 The PEMSERTER® Series 2000® automatic press accommodates a dual-bowl option and QX™ turret tool system to allow quick changes...

Fastener-installation press introduced Publish date: January 15, 2008 The new PEMSERTER® series 3000™l automatic fastener-installation press has been introduced by PennEngineering. According to the...

Press manually installs self-clinching fasteners Publish date: May 8, 2007 The PEMSERTER® Series 4® manual press can install self-clinching fasteners in applications in which automated systems would be...

Fastener-installation press system enhanced Publish date: August 8, 2006 The upgraded PEMSERTER® Series 2000® automatic fastener-installation press system from PennEngineering® installs all types of...

Self-clinching threaded standoffs allow installation close to edges Publish date: February 7, 2006 PEM® type DSOS self-clinching threaded standoffs from PennEngineering® can be installed close to edges in thin metal sheet and offer a...

In-die fastener-feeding system installs nuts, studs, standoffs Publish date: November 8, 2005 The PEMSERTER® in-die fastener-feeding system from PennEngineering® Fastening Technologies, which consists of die tooling,...

Self-locking nuts install close to edge in thin sheets Publish date: August 9, 2005 PEM® self-locking nuts from PennEngineering® enable permanent installation close to edges in metal sheets as thin as 0.036 in. (0.91 mm)....

All-metal floating panel nuts position, spin freely Publish date: May 4, 2004 PennEngineering® Fastening Technologies offers PEM® floating panel nuts designed to position and spin freely upon installation into any...

Assembly press designed for short bed, large-stroke, daylight applications Publish date: April 15, 2008 Beckwood Press Co. manufactures an assembly press, designed for a short bed requirement, for large-stroke and daylight applications. The press,...

Vacuum lifter operable from any overhead hoist Publish date: October 14, 2008 Anver Corp. manufactures a compact, air-powered vacuum lifter that can be operated from any overhead hoist and features an adjustable pad...

Fastener designed for prepainted metal Publish date: July 11, 2006 AKH Inc. has introduced the painted FAS-NER® that allows fastener insertion into prepainted metal. The color is matched to the color of the...

Standard pin clamp enhanced Publish date: August 7, 2007 Humphrey Products Co., working with Japanese partner Koganei, has added a vanadium carbide coating to the pin on its standard pin clamp and...

Electromechanical NC joining module allows close spacing on assembly line Publish date: January 12, 2010 Kistler has developed the Type 2152B electromechanical NC joining module for applications such as press fitting valve seat rings and valve guides....

Nut sensors available in toughened and standard duty versions Publish date: December 15, 2009 Norgren Automation Solutions has introduced NAS nut sensors in toughened and standard-duty versions for M5, M6, M8, M10, and M12 nuts. The nut...

Pneumatic drill provides less than 0.0006-in. T.I.R., 0.0008-in. repeatability on depths Publish date: December 15, 2009 Sugino Corp. has introduced portable pneumatic drilling units designed for the aerospace industry. The Pneucon Selfeeder™ is designed to...

Structural blind rivets, two-piece lockbolts suitable for heavy-duty assembly Publish date: December 16, 2008 Alcoa Fastening Systems' line of Huck fasteners includes a range of structural blind rivets and two-piece lockbolts for heavy-duty assembly...

Electromechanical NC systems accommodate various force-displacement-monitored press-fitting, joining tasks Publish date: September 16, 2008 Kistler's NCFH electromechanical NC joining modules, such as Type 2151B, are compact systems designed for a variety of...

Digital arc stud welding equipment offers enhanced SPC documentation Publish date: June 17, 2008 The Smart Weld™ line of digital arc stud welding equipment is available from Image Industries with advanced data management for SPC...

Captive screw fasteners function as slam-to-close latches Publish date: May 13, 2008 The 1-035SL Captive-Joiner 9.5 Snap-Line from Dirak Inc. is a new technology for fastening sheet metal panels. The captive screw is designed for...

Wire thread inserts eliminate need to account for tangs Publish date: February 12, 2008 Spiralock says that, in independent tests, bolts installed into the company's Drive Notch (DN™) wire thread inserts showed no loss of...

Rivet machine designed for delicate applications Publish date: September 11, 2007 AIM Joraco offers a line of delicate rivet machines based on its standard line of Toggle-Aire® presses. The machine is a fully pneumatic...

Hydra-pneumatic cylinder offers high-speed, all power-stoke operation Publish date: January 9, 2007 AEC/Hypercyl's HZ series hydra-pneumatic cylinders offers a power-stroke operation for various assembly clamping, piercing, metalworking,...

Blind rivet fastener joins 1/8- to 7/8-in.-thick assemblies Publish date: November 7, 2006 Huck Fasteners' HuckLok™ blind rivet fastener provides a �-in. grip range for joining a range of assemblies from truck bodies to HVAC....

Adhesives bond aluminum, steel, galvanized metals to substrate Publish date: August 8, 2006 Henkel Corp. offers seven kinds of its Loctite® Speedbonder™ structural adhesive that bonds aluminum, steel, and galvanized metals to a...

Strain sensor uses piezoelectric elements Publish date: August 8, 2006 The Force/Torque Div. of PCB® Piezotronics Inc. has introduced M240 ICP® strain sensors that use piezoelectric sensing elements to...

Screwdriver features pushbutton, self-storing, interchangeable bits Publish date: August 10, 2004 Ready Products Inc. has introduced the Retract-A-Bit self-storing screwdriver system that features pushbutton changeable bits. Because the bits...

Modular machine guard assembles, reconfigures with hand tools Publish date: April 8, 2004 80/20 Inc.'s modular T-slotted aluminum extrusions can be assembled and reconfigured with hand tools for machine guarding applications. The T-slot...

Advertising Information