Consumables Products

Results: 63


Nickel electrode resists crevice corrosion, pitting Publish date: March 5, 2010 Select-Arc Inc. has introduced a gas-shielded, flux-cored, nickel-based electrode designed to resist crevice corrosion and pitting. SelectAlloy...

Metalworking fluid works with cast and wrought-iron aluminum alloys, stainless steels, titanium, and high nickel alloys Publish date: February 9, 2010 Chemetall has introduced Tech-Cool® 35052, a premium-grade, chlorine EP-activated, heavy-duty, semisynthetic metalworking fluid designed for...

Flashback arrester designed for medium gas consumption requirements Publish date: October 13, 2009 Witt-Gastechnik offers 85-20, a flashback arrester for medium gas consumption requirements in gas welding, cutting, and burning applications. It...

Proportional mixer designed for single press Publish date: October 9, 2007 Industrial Innovations Inc. has added the Pro Mix I to its line of proportional mixers. Designed for manufacturers that mix and distribute...

Aluminum filler metals meet AWS Specification A5.10 Publish date: May 12, 2009 Hobart Brothers has added two new lines of aluminum solid welding wires and GTAW cut lengths to its McKay® brand of filler metals. The company...

Flux-cored wire intended for general purpose welding, repairs Publish date: December 16, 2008 Hobart Brothers offers the Fabshield® 23 self-shielded, flux-cored welding wire for general purpose welding and repairs on thin gauge mild or...

Hardsurfacing wires are impact, abrasion resistant Publish date: September 16, 2008 Designed to provide impact and abrasion resistance, Hobart Brothers McKay® VertiWear® 600 and VertiWear® AP hardsurfacing wires help...

Metal-cored welding wires reduce silicon deposits Publish date: April 15, 2008 Hobart Brothers offers Tri-Mark® Metalloy Vantage™ and Metalloy Vantage Ni1 gas-shielded, metal-cored wires. The wires include patented...

Recyclable 900-lb. welding wire drum reduces downtime Publish date: February 12, 2008 Hobart Brothers has introduced a 900-lb. recyclable drum for metal-cored welding wire, intended to reduce downtime associated with drum...

Stick electrode protection system blocks moisture Publish date: November 7, 2006 The Hobart® P-PAK from Hobart Brothers blocks moisture that can lead to stick electrode damage. It is available in 3/32-, 1/8-, or 5/32-in....

Covered electrode welds nickel-copper alloys Publish date: August 7, 2007 Arcos Industries LLC offers 9N10, a covered electrode used primarily to weld nickel-copper alloys to themselves and to steel. It is also used for...

Stainless steel electrodes weld high-strength steels Publish date: July 14, 2009 Arcos Industries LLC offers bare wire and covered stainless steel electrodes, designed for welding stainless steels to mild steels and for welding...

Stainless steel electrodes manufactured for high-temperature welding Publish date: December 16, 2008 Arcos Industries LLC offers Arcos 310 bare-wire and covered stainless steel electrodes, which are manufactured for high-temperature welding...

Stainless steel electrodes designed for high-temperature welding Publish date: September 16, 2008 Arcos Industries LLC offers new bare and covered stainless steel electrodes, Arcos 16/8/2, which are manufactured for high-temperature welding...

Bare, covered electrodes meet military, nuclear application specifications Publish date: August 12, 2008 Arcos Industries LLC manufactures a line of bare and covered welding electrodes. The company's range of consumables includes high-alloy, stainless...

High-nickel alloy intended for welding in corrosive environments Publish date: March 11, 2008 Arcos Industries LLC has introduced the bare-wire and covered-electrode versions of Arcos 59, which is intended primarily for welding in corrosive...

High-nickel alloy intended for GTAW, GMAW, submerged arc welding Publish date: October 9, 2007 Arcos Industries LLC has introduced the bare-wire and covered-electrode versions of the Arcos 617 high-nickel alloy, used primarily to weld...

Electrode resists salt water corrosion Publish date: May 8, 2007 Arco Industries LLC copper-nickel alloy electrode 813 exhibits high corrosion resistance, especially against salt water, the company says. The...

Fluid mixer automatically mixes 250 gal. continuously Publish date: October 11, 2005 The SSM-300 shear static mixer from Industrial Fluid Systems automatically mixes 250-gal. batches of fluid continuously with little to no user...

Aluminum inert gas piping system has push-to-fit connectors Publish date: August 10, 2004 Praxair offers an aluminum pipe system that delivers argon, nitrogen, and argon/CO2 mixtures to the point of use. It features push-to-fit instant...

Tungsten electrodes available for GTAW, PAW Publish date: January 11, 2005 Process Welding Systems offers tungsten electrodes for GTAW and PAW. Available in thoriated, ceriated, and lanthanated types, the electrodes are...

GMAW systems incorporate new guns, consumables Publish date: March 7, 2006 Miller Electric Mfg. Co. has integrated Bernard Q®-Guns with Centerfire™ consumables on most of its industrial wire feeder products and...

Wire feeder has improved duty cycle Publish date: March 8, 2005 Miller Electric Mfg. Co. has introduced its SuitCase™ X-TREME™ 12VS voltage-sensing wire feeder. Compared to the previous model, the...

Lubricants developed for AHSS Publish date: June 17, 2008 Metal Mates has introduced a new line of water-based lubricants that have been engineered for use on advanced high-strength steels (AHSS) and...

Welding nozzles, gasless parts introduced for welding at high amperages Publish date: April 15, 2008 Bernard has introduced a line of heavy-duty and gasless Centerfire™ components, designed to help reduce operator downtime and improve weld...

Conversion adapters, gas diffusers work with most GMAW guns Publish date: May 8, 2007 Bernard offers conversion adapters and gas diffusers that fit its Centerfire™ contact tips and nozzles to all major GMAW gun brands. The...

GMAW products designed to enhance productivity Publish date: October 11, 2005 Bernard® Welding Equipment's Centerfire™ gas diffusers, contact tips, and nozzles work together to improve productivity in GMAW...

Drawing compound developed for high-heat applications Publish date: December 13, 2005 Houghton Intl. offers its Houghto-Draw® V-2000 drawing compound, a vegetable oil-based product for high-heat applications such as transfer and...

Mixing station reduces fluid handling, transportation Publish date: July 10, 2007 Unist Inc. has announced production of a series of mixing stations for blending and dispensing cutting and forming fluids. The Manual Mixing...

System uniformly lubricates material top and bottom Publish date: November 8, 2005 Unist Inc. offers it's uni-Roller® positive-displacement coil stock lubrication system for coating coil and blank stock in metal stamping,...

Reconditioning system for welding gas cylinders removes contaminants Publish date: October 14, 2008 Viking Blast & Wash Systems' welding gas cylinder reconditioning system, the GC440, removes rust, enamel paint, and other surface contaminants...

Submerged arc flux designed for spiral pipe seam welding Publish date: June 9, 2009 Lincoln Electric has introduced Lincolnweld® SPX80 submerged arc flux, designed for ID and OD submerged arc spiral pipe seam welding. The flux...

Low-hydrogen stick electrode designed for flat, horizontal position structural fabricating Publish date: January 13, 2009 Lincoln Electric offers the Excalibur® 7028 low-hydrogen stick electrode, designed for structural fabricators working in the flat and...

Wire feeder designed for high-production shops Publish date: June 8, 2004 The Lincoln Electric Co. offers the LF-72 industrial wire feeder for high-production shops. The feeder features the company’s patented...

Wires designed for welding stainless steel Publish date: September 13, 2005 Designed for use with 75 percent argon/25 percent CO2 or 100 percent CO2 shielding gases, Hobart Brothers' McKay® ChromaWeld™...

Wire has deoxiders Publish date: February 8, 2005 Hobart Brothers has formulated its FabCO® RXR, an AWS E70T-1 tubular wire with added deoxidizers to allow operators to weld through rust, mill...

Flux-cored wires designed for hard-surfacing applications Publish date: January 11, 2005 Hobart Brothers offers its McKay® VertiWear® 600 and AP gas-shielded flux-cored hard-surfacing wires. Designed for surfacing mild- and...

Carousel stores up to five high-pressure gas bottles Publish date: April 15, 2008 Alabama Laser Technologies' gas bottle storage carousel securely stores up to five high-pressure gas bottles. The company says this eliminates the...

Brazing alloys, solders, fluxes suitable for various HVAC applications Publish date: April 15, 2008 TurboTorch's Viper line includes brazing alloys, solders, and fluxes for various applications. The line includes five brazing rod alloys, five...

Electrodes designed for tubular welding Publish date: August 12, 2008 Select-Arc Inc. manufactures tubular welding electrodes. The company's line of welding wires comprises flux-cored and metal-cored products,...

Hardsurfacing electrodes have extended wear life Publish date: March 11, 2008 Select-Arc Inc. has introduced two complex carbide hardsurfacing electrodes designed to extend wear life by 33 percent over standard chromium...

Stainless steel electrodes designed for elevated travel speed butt, lap, fillet welds Publish date: January 15, 2008 Select-Arc Inc. has introduced two gas-shielded metal-cored, stainless steel electrodes designed for making butt, lap, and fillet welds at...

Metal-cored electrodes designed for stainless steel Publish date: December 13, 2005 Select-Arc Inc. has added three ferritic metal-cored, composite electrodes, the Select 409C, Select 409C-Cb, and Select 409C-Ti, to its stainless...

Two plasma consumable kits introduced Publish date: January 12, 2010 Hypertherm has introduced two consumable kits for its Powermax systems. The all-in-one kit is for hand-held cutting and contains up to four...

Plasma system electrodes designed for extended life Publish date: October 14, 2008 Hypertherm has introduced SilverPlus® electrodes for its HyPerformance® family of systems. Designed to extend electrode life, the...

275-amp plasma cutting consumables introduced Publish date: August 12, 2008 Hypertherm's Centricut brand has announced the availability of 275-amp consumables for InnerLogic (Kaliburn) ProLine 2260 and FineLine 260...

150-amp set added to consumable line Publish date: January 15, 2008 Hypertherm has added a 150-amp consumable set to its Centricut® brand Innerlogic Proline2200 consumable line. The consumables feature...

Reels designed for twin gas welding hose Publish date: September 14, 2004 Hannay N400 series gas welding reels are designed for twin gas welding hose. The reel handles ¼-in. or 3/8-in. oxygen/gas dual hose in...

SAW flux packaging for high-production applications introduced Publish date: January 12, 2010 ESAB Welding & Cutting Products has introduced the BigBag for delivering flux for high-production SAW applications. The woven polypropylene bag,...

Flux-cored wires suitable for less experienced welders Publish date: September 11, 2007 ESAB Welding & Cutting Products has introduced the Dual Shield X series of flux-cored wires. The wires are designed to be more forgiving than...

Tungsten grinder provides consistent tip geometry Publish date: November 8, 2005 Diamond Ground Products offers its DGP-3-V2 grinding system that provides ground arc welding electrodes cut to length with consistent tip geometry...

Gas delivery system works with 12-packs, liquid cylinders Publish date: January 10, 2006 The 622 gas delivery system from CONCOA has a single-body design suited for start-up of 12 packs or liquid cylinders. The dome-loaded seat enables...

Oxyfuel cutting replacement tips offered Publish date: February 12, 2008 American Torch Tip Co. manufactures a line of replacement parts for Messer Vadura 1210A and 1215A oxyfuel cutting tips. Suitable for automated...

Tubular hardfacing electrode combats wear in heavy industry Publish date: September 9, 2009 Rankin Industries' Rantube, a large diameter tubular hardfacing electrode, combats part wear in heavy industry caused by severe abrasion, erosion,...

Storage, dispensing system designed for corrosive chemicals, abrasive fluids Publish date: September 9, 2009 The IFH Group now offers a Special Product Package version of its fluid storage and dispensing system for lubricant storage. The package is...

Lubricant system generates no fluid waste or staining, reduces mist, smoke Publish date: June 9, 2009 The ChilAire™ Lite lubricant system from Cool Clean Technologies is suitable for use in operations that normally are run dry, such as...

Biodegradable lubricant does not evaporate Publish date: August 12, 2008 Camie-Campbell has released B-404, an all-purpose, biodegradable lubricant that is part of the company's Tom's Secret Formula line. The lubricant...

Welding wire drum cart handles up to 1,000-lb. containers Publish date: May 13, 2008 The Kinetic Technologies LOBOY™ drum cart offers 2.3 in. of ground clearance and a low center of gravity for towing drums or boxes of...

Plasma cutting consumable line expanded Publish date: August 8, 2006 Thermacut Inc. has expanded its plasma cutting consumable product line to include direct-replacement consumables for Hypertherm® PowerMax®...

Electrodes gouge metals chemical processes cannot Publish date: August 8, 2006 Carbon arc electrodes from Weldmark physically remove metal, do not need oxidation to maintain the cut, and gouge metals that chemical processes...

Cabinets store most compressed air, gas cylinders and tanks Publish date: November 8, 2005 The Hodge Division of The Durham Mfg. Co. offers a revamped line of gas cylinder storage cabinets. The new line consists of five models of...

GTAW series includes torches, accessories, and consumables Publish date: October 11, 2005 The Legacy series of GTAW products from Weldcraft includes 9, 17, 18, 20, and 26 series torch packages, along with their supporting nozzles,...

Wire packing drums can be nested Publish date: June 8, 2004 France-based Darius Technologies has developed a new technology for packing wire in tapered (conical) drums. Empty drums can be nested by 10 or...

Advertising Information