Finishing Tech Cell - Products
Finishing Products
Results: 50
Multimode robotic blast system prepares ID, OD surfaces of hollow-shaft components
Guyson Corp. has designed and built a robotic pressure-blast machine that operates either as a seven-axis rotary table surface preparation...
|
|
Power brushes engineered for use on 4.5 in., right-angle grinders
Weiler Corp. offers wire brushes engineered for use on 4.5-in., right-angle grinders.
The 4.5-in. Mini-Roughneck stringer bead wheel...
|
|
Deburring system designed for applications requiring small footprint, portability
Abtex Corp.'s Tri-Ten U series planetary-head, return-to-operator (RTO) deburring system deburrs both sides of a part in a single pass. It is...
|
|
Small, thin-profile, Type 1 abrasive wheels debur slots, gears, stampings, castings and cleaning pipe threads
A line of small, thin-profile, Type 1 abrasive wheels for deburring slots, gears, stampings, and castings and cleaning pipe threads is available...
|
|
Coatings for iron, steel protect from corrosion
Three corrosion-protection coatings for iron and steel components are available from Birchwood Casey.
The patented TRU TEMP® process,...
|
|
Grinding wheel for aluminum leaves no unwanted residue on workpiece
The SGP Whisper-ALU reinforced grinding wheel from Pferd Inc. features a patented design that allows it to grind aggressively on aluminum and...
|
|
3-D pyramid abrasives allow finer grit sizes to remove more material
Metabo Corp. has introduced a line of pyramid-design abrasives. The new aluminum oxide abrasives feature a 3-D-structured geometric grain...
|
|
Weld cleaning brushes have enhanced safety feature
The Weiler DUALLY™ weld cleaning brush features a dual-hex nut that eliminates interference issues that might otherwise force users to...
|
|
Elastic metal-cleaning disc suitable for thin sheet metal, cleaning welds on stainless steel, auto bodywork
MAGNUM CLEAN® is an elastic disc from CS Unitec Inc. for the deep cleaning of metals. The disc removes paint, rust, scale, and oil smears,...
|
|
Weld electrocleaning system components introduced
Walter Surface Technologies has introduced new components for its Surfox weld electrocleaning system, including two types of electrolyte...
|
|
Green corrosion inhibitor introduced
Metalloid Corp. has introduced Metcor 52, a botanical, water-based corrosion inhibitor. The product serves as an alternative to oil- and...
|
|
Angle grinder delivers 2,000 W of power
Metabo Corp. offers the W2000 7-in. angle grinder. The unit delivers 2,000 W of power for cutting, grinding, and sanding applications....
|
|
Centerless deburring, polishing machines offered in both dry, wet configurations
Midwest Sandright has introduced the redesigned line of Rand-Bright centerless deburring and polishing machines to handle 0.25- to 6-in.-dia....
|
|
Bonded abrasives reinforced with fiberglass webbing for stability
Weiler Corp.'s line of Vortec Pro® bonded abrasive products are designed for general-purpose grinding and cutting applications on steel,...
|
|
Robot-tended spindle-blast machine introduced
Guyson Corp. has integrated a machine-tending robot for automatic loading and unloading of its RXS-900 rotary spindle-blast system in an...
|
|
Mounted ceramic flap wheel allows aggressive, cool grinding on stainless steel, nickel-based alloys
Grinding additives in the coating of the new Co-Cool mounted ceramic flap wheel from Pferd help prevent clogging and allow aggressive, cool...
|
|
Pipe sander/grinder helps render seams invisible
CS Unitec's Pipe-Max weld seam grinder/pipe sander helps render weld seams invisible and can produce satin to mirror finishes on stainless...
|
|
Aluminum oxide conversion coating introduced
Birchwood Casey has introduced the MICROLOK® AO, a nontoxic aluminum oxide conversion coating that is 0.000060 in. thick, silver-black in...
|
|
Quick-trim flap discs allow full use of flaps
Saint-Gobain Abrasives has introduced two new Norton quick-trim flap discs for the metal fabricating industry. Both feature a new, flexible,...
|
|
Weld cleaning brush for use on 4.5-in. minigrinders features high knot count, short trim length
Weiler Corp.'s 4.5-in. Roughneck® weld cleaning brush is designed specifically for use on 4.5-in. minigrinders. According to the...
|
|
Multitumbling batch blast machine has no pinch points
Rosler offers the RMT multitumbling batch blast machine. Using a rotary barrel design made of wear-resistant manganese steel, the unit has no...
|
|
Small footprint powder coat system designed for low energy consumption
Infratrol Mfg. offers the EcoFlex powder coat system, designed to have a small footprint and low energy consumption.
Features include an...
|
|
Right-angle abrasive discs feature engineered grain and improved resin bond system
Saint-Gobain Abrasives has introduced Norton Vortex Rapid Finish nonwoven right-angle discs for the metal fabricating industry. They feature...
|
|
Flexible abrasive wheels offer extended wear
Smooth Touch™ flexible, cotton-fiber abrasive wheels for pipe thread cleaning, polishing, and blending have been introduced by Rex-Cut...
|
|
High-volume wet blast machines clean, descale, degrease surfaces in single operation
Rosler's KS series wet blast machines come in standard machine cabinet sizes from 28 to 60 in. square with a variety of sump and media...
|
|
Tool deburrs parts on punch press
Wilson has introduced a tool that deburrs parts on the punch press. Available for TRUMPF® or thick-turret-style punch presses, the tool coins a...
|
|
Hand-operated grinder deburs laser-cut, punched parts
AM Machinery Sales Inc. has introduced the SwingGrinder for deburring laser-cut and punched parts. According to the manufacturer, the machine...
|
|
Small-part deburring machine processes both ferrous, nonferrous material
The CrossMaster DD double-disk deburring machine, offered by AM Machinery Sales, handles parts as small as the size of a quarter. The through-feed...
|
|
Cordless surface finisher usable for up to 15 minutes on one charge
The Poly PTX Accu 28V cordless longitudinal grinder from CS Unitec can be used for up to 15 min. on one charge. It is suitable for on-site use or...
|
|
Extended nose grinder finishes, polishes hard-to-access fillet welds
Metabo Corp. offers the KNSE 12-150 fillet weld grinder for finishing metals, including stainless steel. The extended-nose grinder is used for...
|
|
Metal surface sander provides 4 in. of working tool width
CGW-Camel Grinding Wheels has introduced a metal surface drum sander and flap wheel drum line for large-scale metal finishing.
The flap...
|
|
Abrasive belt machines' thermal insulation helps prevent cold air transmission to operator
Dynabrade Inc. offers Dynastraight®: portable, air-powered abrasive tools for paint and rust removal, refining before final finishing,...
|
|
Burnisher accommodates wheel diameters from 4 to 4.5 in., widths from 0.625 to 4 in.
Metabo Corp. offers the SE12-115 burnisher for finishing and polishing stainless steel and other metals.
With accessories such as an expansion...
|
|
Weld cleaning brushes feature dual-hex nuts to eliminate need for guard removal
Weiler has introduced the DUALLY™ stringer-bead brush. It features a new dual-hex nut that helps eliminate interference issues that might...
|
|
Air-powered abrasive-belt machine can be used in normally inaccessible areas
Dynabrade's Mini-Dynafile II is a lightweight, air-powered abrasive-belt machine for grinding, blending, and deburring in normally...
|
|
Pass-through wash system processes parts up to 12 in. high
Viking Blast & Wash Systems has released the new CBW 1212 pass-through wash system. This heated jet spray washer incorporates a powered,...
|
|
Deburring tool eliminates burrs, secondary operations on punched parts
Mate's new Rollerball Deburr™ tool eliminates burrs and secondary operations on punched parts. Designed to deburr mild steel, stainless...
|
|
Grinder/polisher stores, recalls 32 methods
Buehler has introduced the EcoMet® 250/300 Pro grinder/polisher with AutoMet® 250/300 power head. It can store and recall 32 methods via...
|
|
Liquid mixing, delivery system introduced
IntelliMeld™, a new dual liquid mixing and delivery system for industrial use, has been introduced by Colvin Consulting. It is designed for use...
|
|
High-gloss coatings withstand heat to 500 degrees F
Dampney Co. Inc.'s Thurmalox® 8800 series heat-resistant, high-gloss coatings provide a decorative, porcelain-like finish on metal surfaces that...
|
|
Depressed-center right-angle grinding wheel line expanded
Saint-Gobain Abrasives has expanded its line of Norton depressed-center wheels for right-angle grinding.
The Charger™ Plus and Gemini®...
|
|
Pipe sander/grinder makes weld seams invisible, produces satin to mirror finishes on various materials
For surface finishing applications on pipe and handrails, CS Unitec's new Pipe-Max combination weld seam grinder and pipe sander makes weld...
|
|
Flap, fiber disks engineered for applications from stock removal to blending
Norton has introduced a new line of Norton/Merit flap disks and fiber disks for right-angle grinding.
The SG Blaze® Plus is offered in...
|
|
Multiprocess abrasive wheels designed to eliminate frequent wheel changes
CGW-Camel Grinding Wheels has expanded its line of abrasive wheels with the introduction of its three-in-one combo wheels, which allow for...
|
|
Reduced-noise vibratory tub measures 95 in. long, 35 in. wide, and 33 in. deep
Viking Blast & Wash Systems has released the 54S vibratory tub. This 54-cu.-ft. shaker offers a tub measuring 95 in. long by 35 in. wide...
|
|
Vibratory finisher designed for quite operation
Kalamazoo Industries' model KVF3 vibratory finisher is designed for deburring, polishing, and other finishing operations requiring the gentle...
|
|
Industrial-duty buffer accommodates all sizes, shapes of workpieces
W.W. Grainger Inc. offers the Dayton 10-in., industrial-duty buffer. Designed for use with 10- and 12-in.-dia. soft cloth wheels, the...
|
|
Weld cleaning brush designed for use on 4.5-in minigrinders
Weiler Corp. has added a 4.5-in. Roughneck® to its line of stringer bead brushes. It is designed for use on 4.5-in. minigrinders for surface...
|
|
Trimmable flap disks designed for extended working life
CGW-Camel Grinding Wheels has introduced trimmable Z3 flap disks. The disk backing is designed to trim down to expose flaps for extended...
|
|
30-min. process develops 0.000060-in. black coating
Birchwood Casey offers the scratch-resistant LUMICLAD® finish. The 30-min. process develops a coating thickness of 0.000060 in. with a smooth,...
|
|
