The FABRICATORSTAMPING JournalPractical Welding TodayTube & Pipe Journalthefabricator.comCanadian Industry ManufacturingGreen ManufacturerPWT TVTPJ TV

 
Shop Strategies Tech Cell - Products
Home \ Shop Strategies \ Products

Shop Strategies Products

Results: 50

Workholding pins available in 10- to 25-mm diameters

Published: May 19, 2013
Tech Cell: Shop Strategies

J.W. Winco Inc. offers series GN 6322 workholding pins in metric sizes. The RoHS-compliant pins are inserted into bores for positioning, with...

Blast machine made for heavy-duty operations

Published: May 14, 2013
Tech Cell: Shop Strategies, Finishing

Viking Blast & Wash Systems has released the model 1200 tumble belt blast machine. The 12-cu.-ft. machine incorporates changes to the...

Valves, fittings offer control in demanding environments

Published: May 14, 2013
Tech Cell: Shop Strategies, Tube and Pipe Fabrication

To service surface and subsea installation, process instrumentation and controls, chemical injection, and testing equipment applications,...

Power range expanded on medium-voltage drive

Published: May 9, 2013
Tech Cell: Shop Strategies

The ACS 2000 active front-end drive from ABB is available with power capabilities up to 3,000 HP for general-purpose applications. It is...

Vacuum cups withstand hot forming temps

Published: May 9, 2013
Tech Cell: Materials Handling, Shop Strategies

Bilsing Automation North America has introduced the WF2 series black vacuum cups, designed to withstand the high-temperature environment of...

Demo tool management system introduced

Published: April 11, 2013
Tech Cell: Shop Strategies

Kennametal Inc. has expanded its ToolBOSS™ tool management system. The new Flex Unit is a smaller, portable demo unit that the manufacturer...

Workbench's cantilever design provides more leg room

Published: April 10, 2013
Tech Cell: Shop Strategies

IAC Industries has introduced the 930 and 940 Pro Series adjustable-height workbenches. Both series incorporate a cantilever support system,...

Electric lift trucks hold up to 4,000-lb. loads

Published: April 10, 2013
Tech Cell: Shop Strategies

Nissan Forklift Corp. has introduced the TX series three-wheel, AC-powered lift trucks. They are available in 3,000-, 3,500-, and 4,000-lb....

Battery-powered scissor lift places loads at convenient height

Published: April 9, 2013
Tech Cell: Materials Handling, Shop Strategies

XBP series portable electric scissor lifts are available from Presto Lifts Inc. The battery-powered tables lift and lower at the touch of a...

Dust collector hoppers fit low-profile applications

Published: April 9, 2013
Tech Cell: Shop Strategies, Safety

Camfil APC has introduced two new dust collector hoppers for use in constrained-space applications. Depending on the model, the low-profile...

Fieldbus encoders feature hollow-shaft design

Published: April 9, 2013
Tech Cell: Shop Strategies

Heidenhain offers the ECN/EQN 400 series rotary encoders with Profibus and Profinet interfaces for use in manufacturing and process automation....

Workbench, storage systems are customizable

Published: April 8, 2013
Tech Cell: Shop Strategies

The MCS aluminum framework system from HepcoMotion® lets users customize workbench and storage systems from standard elements. Visitors to...

OPC server retrieves production data from shop floor

Published: April 4, 2013
Tech Cell: Shop Strategies

FANUC FA America has introduced FASOPC for retrieval of CNC machine production data. The OPC server is designed for getting machine...

Seating pins also function as feet

Published: April 3, 2013
Tech Cell: Shop Strategies

J.W. Winco Inc. offers series GN 6321.1 seating pins in metric sizes. The RoHS-compliant seating pins are fabricated of tempered, hardened steel....

Compact palletizer frees up space

Published: April 1, 2013
Tech Cell: Automation and Robotics, Shop Strategies

QComp Technologies Inc. has introduced the QComp 5G palletizer. Its compact, modular design frees up floor space, allowing users to stack bags,...

Temperature indicators available in more than 100 temperature ratings

Published: March 25, 2013
Tech Cell: Shop Strategies

Tempilstik°® temperature indicators from LA-CO Industries Inc. make marks that melt within 1 percent of their rated temperatures, according...

Picosecond laser designed for high-throughput processing

Published: March 21, 2013
Tech Cell: Shop Strategies

Coherent Inc. has introduced the Talisker 1000 series ultrafast industrial laser. The high-power picosecond laser is designed for...

Dry vacuum holds 110 gallons

Published: March 21, 2013
Tech Cell: Shop Strategies, Safety

Exair has introduced the 110-gal. Premium Heavy Duty Dry Vac™ system, an industrial-duty vacuum cleaner designed to vacuum high volumes of...

Laser marking systems work with Windows-based software

Published: March 19, 2013
Tech Cell: Shop Strategies

MB Metal Technologies LLC offers TYKMA® laser marking systems and software for identification and traceability of parts of almost any material,...

Downdraft table contributes to healthy environment

Published: March 14, 2013
Tech Cell: Safety, Shop Strategies

Denray downdraft tables help protect workers from smoke, fumes, and particles generated during grinding, welding, or sanding operations. They...

Structural adhesives serve as alternative to mechanical fasteners

Published: March 14, 2013
Tech Cell: For Engineers, Shop Strategies

Fabrico offers structural adhesives in liquid and tape formats. The adhesives are designed for bonding and joining applications with loads up to...

Aqueous cleaning system meets aerospace cleanliness standards

Published: March 13, 2013
Tech Cell: Finishing, Shop Strategies

MecWash Systems has introduced the Midi, an automatic, customizable, self-contained aqueous cleaning system that meets aerospace cleanliness...

MRP system designed for fabrication industry

Published: March 5, 2013
Tech Cell: CAD/CAM Software, For Engineers, Shop Strategies

SigmaTEK Systems has introduced SigmaMRP™. Developed for the specific requirements of the fabrication industry, the manufacturing resource...

Collection arm removes dusts, fumes at the source

Published: February 26, 2013
Tech Cell: Shop Strategies

Airflow Systems Inc. offers the E-Z Arm® high-flow series of contaminant extractor arms for source-point collection and removal of dusts,...

Low-pressure nozzles nearly drip-free

Published: February 26, 2013
Tech Cell: Shop Strategies

Industrial Innovations offers patented Z-Nozzles, designed to be 99.5 percent drip-free to help eliminate waste in lubricant application. The...

Nozzle design increases dust collector cleaning velocity to supersonic flow

Published: February 26, 2013
Tech Cell: Shop Strategies

Scientific Dust Collectors has introduced the next generation of nozzle cleaning technology for reverse-pulse-jet dust collectors. It uses...

Programmable safety controller offers integrated safety system

Published: February 18, 2013
Tech Cell: Safety, Shop Strategies

Tapeswitch Corp. has released the new PCU programmable safety controller. It offers a fully integrated safety system that unifies the...

Brush-on blackener serves as quick fix for scratched black oxided parts

Published: February 18, 2013
Tech Cell: Finishing, Shop Strategies

PRESTO BLACK® BST4 brush-on liquid from Birchwood® Technologies is an instant-acting cold blackener for all iron and nonstainless steels....

Electronic pressure switch suitable for hostile environments

Published: February 12, 2013
Tech Cell: For Engineers, Shop Strategies

SOR Inc. has introduced an electronic pressure switch that offers supplemental continuous output of either 4 to 20 mA or 1 to 5 VDC. The 805QS...

3-D welding table converts to any desired configuration

Published: February 12, 2013
Tech Cell: For Engineers, Shop Strategies

Kemper America offers a new 3-D welding table for single production pieces or series production. The table converts into any desired configuration...

Marking machines designed to integrate into automation systems

Published: February 11, 2013
Tech Cell: Shop Strategies

I-Mark™ I-Series (Integration) dot peen and silent-scribe marking systems from Columbia Marking Tools (CMT) are designed for integration...

Marking heads help fabricators meet auto industry traceability demands

Published: February 8, 2013
Tech Cell: Shop Strategies

Technifor, business entity of Gravotech Group, offers the XF510 series of marking heads for identification and traceability in the auto...

Stretch wrapping machines available

Published: February 8, 2013
Tech Cell: Shop Strategies

ITW Muller offers two stretch wrapping machines. The Octopus S series is an automatic rotary ring stretch wrapper. Featuring a load...

Coolant recycling systems available for 2,500 to 10,000 gal.

Published: February 8, 2013
Tech Cell: Shop Strategies

The Eriez® HydroFlow® line of coolant recycling systems can recycle any water-miscible fluid, minimizing or eliminating disposal and...

Cost estimating tool allows costing updates across entire product lines

Published: February 8, 2013
Tech Cell: Shop Strategies

eTurboTools Inc. has released eTurboQuote, a cloud-based cost-estimating development tool for small to medium-sized job shops, tool and die shops,...

Robotic blast system designed for coating workcells

Published: January 30, 2013
Tech Cell: Shop Strategies

Guyson Corp. has designed and built a 7-axis robotic grit-blast machine configured for precision roughening of component surfaces in a...

Low-profile fan changes perceptible temps by 5 to 15 degrees

Published: January 29, 2013
Tech Cell: Shop Strategies

MacroAir has introduced the AirElite fan. It features a 0.5-HP motor, onboard electronics, and fully integrated control system. The housing...

Industrial washer includes wash, phosphatizing sections

Published: January 28, 2013
Tech Cell: Finishing, Shop Strategies

Viking Blast & Wash Systems has released the MRW 4830 wash and phosphatizing system. The washer has a 48-in.-tall by 30-in.-wide wash...

Coolant sump cleaner/dispenser mounted on electric truck for mobility

Published: January 28, 2013
Tech Cell: Shop Strategies

Cecor has introduced the model CP50-200/200CB5 coolant sump cleaner/dispenser for coolant recycling programs in large metal machining...

Cleaner brings contaminants to surface

Published: January 24, 2013
Tech Cell: Shop Strategies

Aero Clean SLC from Chemtool Inc. is a water-based, pH-neutral cleaner that uses specialty surfactant systems for cleaning all aluminum alloys, as...

Updates made to dust, fume collectors

Published: January 22, 2013
Tech Cell: Safety, Shop Strategies

Camfil Farr APC has announced updates to its Gold Series® cartridge dust and fume collectors. The line features a number of design changes and...

Wheels roll smoothly with loads up to 7,200 lbs.

Published: January 22, 2013
Tech Cell: Materials Handling, Shop Strategies

New Ultralast™ wheels from Hamilton Caster are built to handle heavy loads with continuous, high-speed use. The industrial wheels are made...

Impact sensor monitors equipment performance

Published: January 22, 2013
Tech Cell: Testing and Measuring, Shop Strategies

PHD Inc. has introduced the PHD series KG impact sensor for monitoring equipment performance. It attaches to any piece of equipment that has...

Monitoring system connects a few machines or worldwide facilities

Published: January 22, 2013
Tech Cell: Shop Strategies, For Engineers

Syscon Intl. has introduced MT Focus®, a monitoring system for new and legacy machine tools. It connects machines through the universal language...

Eco-friendly cleaning agent added to new solvent products

Published: January 21, 2013
Tech Cell: Shop Strategies, Finishing

Walter Surface Technologies (WST) has developed an ecofriendly product for heavy-duty industrial cleaning. Nature Boost is an additive derived...

Portable radios suitable for manufacturing environments

Published: January 21, 2013
Tech Cell: Shop Strategies

PT series portable radios from Ritron Inc. are suitable for two-way radio use in manufacturing environments, processing facilities,...

Manufacturing software replaces paper-based process with MES digitization

Published: January 17, 2013
Tech Cell: For Engineers, Shop Strategies

GE Intelligent Platforms has introduced advanced manufacturing software to help increase production speed and more tightly control quality....

Conveyor drive features compact design

Published: January 9, 2013
Tech Cell: Shop Strategies, Materials Handling

The new 2200 series Mid Drive belt conveyor platform from Dorner Mfg. frees up the motor and mounts from both ends of the conveyor, creating...

Bar code tracking software designed for fabricators

Published: January 7, 2013
Tech Cell: Shop Strategies

Dynamic Systems Inc. has announced the launch of the CheckMate ERP software suite, based on the company's manufacturing suite with modules...

Plasma cutters added to cost estimating software library

Published: January 4, 2013
Tech Cell: Shop Strategies, For Engineers, Plasma Cutting

MTI Systems has added high-definition plasma cutting machines to its Costimator® cost estimating software library, offering updates and laser...