- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 229
- From The Fabricator
Stability system improves lift truck load balance
- Mar 2, 2017
- Materials Handling
- Product Release
Stärke Material Handling Group has introduced a continuous stability system as a standard feature in its LiftMaxx line of industrial lift equipment. This system improves load balance and counteracts the destabilizing influences of uneven surfaces, small debris, and lateral momentum to help reduce...
- From The Fabricator
Siphon-fed spray nozzle coats, cools, treats, and paints
- Mar 2, 2017
- Shop Management
- Product Release
Exair’s new 1/2 NPT siphon-fed atomizing spray nozzle atomizes a variety of fluids in a round spray pattern where no liquid pressure is available and heavy application of liquid is needed. This corrosion-resistant, type 303SS nozzle draws liquid into the airstream and mixes it internally while...
- From The Fabricator
X-ray system inspects welds in pipeline segments
- Mar 1, 2017
- Testing and Measuring
- Product Release
VisiConsult X-ray Systems & Solutions GmbH has developed a new system for pipeline weld inspection that incorporates new, high-tech materials for digital flat panels. Instead of using a massive steel boom, it employs a carbon fiber tube that weighs less than 220 lbs. and uses a cooling system on...
- From The Fabricator
Brochure details press feed equipment
- Mar 1, 2017
- Bending and Forming
- Product Release
Dallas Industries has released a corporate brochure featuring its coil handling and press feeding equipment and controls for the stamping industry. One section is devoted to the company’s conventional press feed lineup that can handle coil weights to 60,000 lbs. and widths up to 84 in., as well...
- From The Fabricator
Simulation software includes new pressure welding module
- Feb 28, 2017
- Bending and Forming
- Product Release
Simufact Eng., an MSC Software company, offers Simufact Forming 14 simulation software. It features a newly developed graphical user interface that simplifies the modeling and evaluation of the simulation results (preprocessing and postprocessing). A new pressure welding module enables the...
- From The Fabricator
Misting system helps relieve heat stress
- Feb 28, 2017
- Shop Management
- Product Release
Ergodyne has introduced the SHAX® 6095 misting system, which delivers an extra-fine mist for cooling off workers on hot, humid days. The pressurized system is portable and requires no battery or electrical power source; it can either be manually filled up and pumped or fastened to a hose. Eight...
- From The Fabricator
Scanner measures objects with challenging surfaces
- Feb 28, 2017
- Testing and Measuring
- Product Release
Hexagon Mfg. Intelligence has introduced new laser scanning technology for the portable Romer Absolute Arm SI series CMM. The RS4 scanner offers new optics and electronics with a scan rate nearly 60 percent faster than the previous model. The fully integrated scanner is optimized for measuring...
- From The Fabricator
Personal unit delivers OSHA-compliant grade D breathable air
- Feb 27, 2017
- Safety
- Product Release
Martech Services Co. offers the model P-20 personal air breathing unit. According to the company, when the unit is used with the existing filtered compressed air supply, it provides grade D breathable air for a proper NIOSH-approved respirator. With the provided 54-in. tool air hose assembly, it...
- From The Fabricator
Simulation software takes stamping from feasibility to validation
- Feb 27, 2017
- Bending and Forming
- Product Release
ESI Group has released PAM-STAMP 2017 simulation software for sheet metal forming. The program covers cold, warm, and hot forming processes and most special processes for all types of metallic materials. It offers management of progressive, transfer, and line dies, as well as tool surface design....
- From The Fabricator
Load-stabilized hoist transports loads quickly
- Feb 27, 2017
- Materials Handling
- Product Release
Engineered Material Handling (EMH) has introduced the model LS load-stabilized hoist for transporting loads quickly and securely. Its rope tensioning design and reeving configuration help reduce load swing, even during quick starts and stops. Suitable for handling steel coil and mesh, the hoist is...
- From The Fabricator
Point-of-use panel maintains purity in nitrogen, CO2 incubators
- Feb 24, 2017
- Shop Management
- Product Release
CONCOA has introduced the 55S series high-purity, point-of-use panel, designed to provide pressure control and isolation in CO2 and nitrogen incubator applications. The panel offers final line pressure control and individual isolation for up to four streams of CO2 and nitrogen, allowing it to...
- From The Fabricator
Four-gas monitor offers two-year run-time
- Feb 23, 2017
- Testing and Measuring
- Product Release
Honeywell has introduced the BW Clip4, a four-gas, portable monitor that can operate continuously for two years without the need to change sensors or charge batteries, the company states. Suitable for oil and gas, wastewater, heavy manufacturing, and confined-space applications, the unit stays on...
- From The Fabricator
Brochure highlights eight manufacturing technologies
- Feb 23, 2017
- Shop Management
- Product Release
Amada Miyachi America has published a brochure that features its eight manufacturing technology systems, focusing on their capabilities and typical applications. The literature also details how the firm’s applications laboratory experts employ a sample qualification process to help determine the...
- From The Welder
Angle grinder delivers 20 percent more power
- Feb 22, 2017
- Cutting and Weld Prep
- Product Release
Fuji Air Tools has launched the FA-70 series of 7-in. angle grinders with 1,800-W, 2.4-HP output, which the company says is 20 percent higher than alternative grinders in the same class. The grinders, which can be used on various materials, are suitable for heavy-duty applications performed in...
- From The Fabricator
Shearing system package introduced
- Feb 21, 2017
- Shearing
- Product Release
COMEQ Inc. has announced the availability of the Primeline shearing system package. Swing-beam shears are available for materials up to ¾ in. thick and 20 ft. long. The shearing system features adjustable rake angle with a low cutting angle for processing thin material. When the operator inputs a...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas