- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 365
- From The Welder
Stud welder runs on 120-V, single-phase power
- Jul 10, 2014
- Arc Welding
- Product Release
Nelson Stud Welding has introduced the N550c Arc Charger. Its input charger system converts the 120-V wall outlet power into digitally controlled stored energy for welding studs up to 0.375 in. dia. The portable unit can run off a small 5-kW generator, allowing fastening in remote places. Its...
- From The Welder
Fume extraction gun made to be lightweight
- Jul 10, 2014
- Consumables
- Product Release
Bernard has redesigned its Clean Air™ fume extraction gun to be lighter and smaller than many standard fume extraction guns. With nearly the same dimensions as the company’s regular semiautomatic GMAW gun, it is suitable for almost any medium- to heavy-duty solid or flux-cored welding...
- From The Fabricator
Weld fume extractor made for welding on the go
- Jul 9, 2014
- Safety
- Product Release
Lincoln Electric offers the next-generation Miniflex® weld fume control system. Created for the welder on the go, the system removes and filters welding fumes wherever welding operators go, including confined and other hard-to-reach spaces. It offers a dual-filtration system made up of a...
- From The Fabricator
Diamond waterjet cutting head keeps jet stream aligned
- Jul 9, 2014
- Waterjet Cutting
- Product Release
The TRIDENT-2® diamond cutting head from Barton Intl. combines an integrated diamond design with a replaceable orifice. The precision-aligned cartridge technology helps ensure absolute alignment of the jet stream through all components of the cutting head, minimizing wear and directing maximum...
- From The Fabricator
Pneumatic 3-D part manipulators allow precise material handling
- Jul 9, 2014
- Materials Handling
- Product Release
TDA Buddy Inc.’s pneumatic 3-D part manipulators enable a single worker to perform precise material handling movements with little effort, says the company. The pneumatic manipulators can grip a part up to 400 lbs.; roll, pitch, or yaw it if necessary; hold it rigid; and place it accurately...
- From The Fabricator
Compact 3-D bender can be integrated with robotics
- Jul 9, 2014
- Bending and Forming
- Product Release
Automated Industrial Machinery Inc. (AIM) offers the AFC compact 3-D bender. The small-footprint machine requires a low investment, enabling smaller companies to bring in automation and the larger ones to offset current capacity. Features include standard slip ring technology with unlimited...
- From The Fabricator
Portable laser marker moves to the workpiece
- Jul 8, 2014
- Shop Management
- Product Release
The TruMark 5010 Mobile Marker, a portable laser marking unit from TRUMPF, will make its North American debut at IMTS. This new laser marking concept features a compact, hand-held marking head. The operator moves the laser marking unit to the workpiece, eliminating the need to move the part, and...
- From The Welder
Cross-jet design prevents sparks from contaminating focusing lens cover slide
- Jul 8, 2014
- Laser Welding
- Product Release
Prima Power Laserdyne has developed a new focusing lens assembly with a cross-jet design that maintains the compact profile of the third-generation BeamDirector®, called BD3Y. The cross-jet feature provides a high-velocity gas barrier that prevents metal sparks in the weld zone from contaminating...
- From The Fabricator
Toolkit covers brazing, cutting, welding needs
- Jul 8, 2014
- Shop Management
- Product Release
Uniweld offers The Wurks™, which includes the tools necessary to work on just about any automotive, general home maintenance, plumbing, or welding project. Available in three different styles, the all-purpose outfit is packed in a toolbox with a compartmented accessory tray. Included in every...
- From The Fabricator
Ferrous powders introduced for wear parts production
- Jul 8, 2014
- Metals/Materials
- Product Release
The NanoSteel® Co., a designer of nanostructured steel materials, has introduced a portfolio of ferrous powders designed to extend steel’s capabilities in near-net-shape wear parts for highly abrasive environments. These new alloys feature hardnesses of more than 1,400 HV, wear resistances below...
- From The Fabricator
Automatic slag removal table eliminates production interruptions
- Jul 8, 2014
- Laser Cutting
- Product Release
Koike Aronson Inc./Ransome has introduced the Klean Sweep automatic slag removal table. The self-cleaning cutting table removes slag and scrap automatically during cutting operations to help eliminate production interruptions and reduce labor costs. It can be used with various laser, oxyfuel, and...
- From The Fabricator
ERP add-on helps ensure production workers have most current document versions
- Jul 7, 2014
- Shop Management
- Product Release
Global Shop Solutions offers the Version Management System (VMS). It is an add-on to the patented Document Control™ ERP module, which attaches documents to jobs and work centers electronically. It offers several new document security features to help ensure production workers have the most...
- From The Fabricator
Fluid recycling system cleans coolant without stopping production
- Jul 7, 2014
- Shop Management
- Product Release
A new brochure from Eriez® HydroFlow® features the SumpDoc® mobile, inline fluid and recycling system. It provides quick cleaning and rejuvenation of a machine’s coolant without causing a production stoppage. The six-page brochure offers a complete overview of the equipment, its features,...
- From The Fabricator
Communication protocol offered with rotary encoder series
- Jul 7, 2014
- Shop Management
- Product Release
Leine & Linde, available in North America through Heidenhain Corp., offers the use of Siemens Drive-CLiQ communication protocol in its inductive 600 absolute rotary encoder series. The Ethernet-based protocol interfaces with Sinamics control systems. It has a speed of 100 Mbit/s and a cycle time...
- From The Fabricator
External laser scanner features high-speed, 3-D point cloud capturing capabilities
- Jul 7, 2014
- Testing and Measuring
- Product Release
Hexagon Metrology has introduced an external laser scanner for use with the new Romer Absolute Arm. The Hexagon Probe Laser 20.8 (HP-L-20.8), which replaces the CMS108 laser scanner, performs on complex surfaces and workpieces made of shiny materials such as machined, cast, stamped, and forged...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1