- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 366
- From The Fabricator
Renewable, biobased solvent removes industrial-grade complex greases
- Jun 27, 2014
- Shop Management
- Product Release
Elevance Renewable Sciences Inc. has introduced Elevance Clean™ 1200, a degreasing and VOC-exempt solvent for industrial degreasing in such applications as heavy manufacturing and transportation MRO. The renewable, biobased solvent, produced from natural oils, removes industrial-grade complex...
- From The Fabricator
Soft top jaws grip hard-to-handle products without marring surfaces
- Jun 26, 2014
- Shop Management
- Product Release
Dillon Mfg. offers turned or bored soft blank top jaws to provide a smooth gripping surface that holds the workpiece snugly with no marring of the surface. Extra-wide jaws are available to provide a wider gripping surface, especially for large-diameter parts. The serrated soft top jaws are...
- From The Fabricator
Horizontal-motion conveyor moves scrap without vibration, springs
- Jun 26, 2014
- Shop Management
- Product Release
Prab Inc. has redesigned the horizontal-motion conveyor known as the Quick Return (QR). The conveyor removes scrap from a press or other cutting and stamping operations by propelling material forward gently, without vibration or springs. The drive location is flexible, allowing for an adaptive...
- From The Fabricator
Mist collector achieves 99.98 percent efficiency
- Jun 26, 2014
- Shop Management
- Product Release
MistMax™ mist collector from Micro Air Clean Air Systems is designed to achieve 99.98 percent efficiency without the use of additional HEPA filters. The patented multilayer filter design provides filter life of one to five years, depending on the application. The unit is suitable for...
- From The Welder
Fiber laser system features rotating lens for welding
- Jun 26, 2014
- Laser Welding
- Product Release
Amada offers the FLW 4-kW fiber laser system. The laser beam has a wavelength that is about one-tenth of that emitted by a conventional CO2 laser, helping to ensure high-speed results even when processing reflective materials, such as brass and copper, and combinations of dissimilar materials that...
- From The Fabricator
Coolant suitable for machining aluminum alloys
- Jun 25, 2014
- Machining
- Product Release
Wallover Oil Co. has introduced WS 8800 machining coolant. The chlorine-free, nonfoaming coolant is designed for machining and grinding of ferrous and nonferrous metals including stainless steel, titanium, cast iron, and all alloys of aluminum. A bioresistant additive controls bacteria and...
- From The Fabricator
Auto-darkening filter protects eyes in light, dark state
- Jun 25, 2014
- Safety
- Product Release
Arc One offers the Optiva® OPT-1000 Black welding helmet and OPT-2000 Flame Rider welding helmet with an inside variable auto-darkening filter. Equipped with solar-powered technology, the filter protects the user’s eyes from UV and IR rays, both in the light state (4) and dark state (9-13)....
- From The Fabricator
Air knives available up to 108 in. long
- Jun 25, 2014
- Shop Management
- Product Release
Exair has expanded its line of Long Super air knives to include a maximum length of 108 in. The company now manufactures all knives 60 in. and longer in one-piece construction to help ensure seamless airflow and decrease overall height by 0.5 in. The air knives produce a laminar sheet of airflow...
- From The Fabricator
Direct-drive waterjet pump helps minimize downtime
- Jun 25, 2014
- Waterjet Cutting
- Product Release
Flow Intl. Corp. has introduced the HyPlex® Prime direct-drive, ultrahigh-pressure waterjet pump. Combining HyperJet® intensifier pump technology with direct-drive pump efficiency, the pump is designed to increase maintenance intervals over previous models. The pump has a maximum developed...
- From The Fabricator
Sanding discs remove six times more stock than regular discs
- Jun 24, 2014
- Finishing
- Product Release
Walter Surface Technologies has updated its Coolcut XX sanding discs. They feature a blend of abrasive grains, as well as bond and cooling agents. The 4.5-, 5-, and 7-in. general-purpose sanding discs feature Cyclone™ self-sharpening grains, which provide six times more stock removal compared to...
- From The Welder
Variation of hot-wire GTAW combines two arcs into one
- Jun 24, 2014
- Arc Welding
- Product Release
TIGer technology from Polysoude is a variant of hot-wire GTAW. The basic principle involves the juxtaposition of two GTAW arcs, organized and controlled to combine into one single arc with the calorific value of the combination of both powers, but with characteristics that are unusual for such...
- From The Welder
Consumables cover plasma cutting from 50 to 200 amps
- Jun 24, 2014
- Consumables
- Product Release
Thermacut, The Cutting Company, offers a line of replacement consumables suitable for use with the HyPro 2000 ® upgrade for MAX200® and HT2000® plasma cutting systems from Hypertherm®. The product line covers cutting applications from 50 to 200 amps and material that includes mild steel,...
- From The Fabricator
Air-powered, variable-speed pencil grinder adjusts up to 60,000 RPM
- Jun 24, 2014
- Finishing
- Product Release
Dynabrade Inc. has introduced an air-powered, variable-speed pencil grinder. The tool allows the user to adjust the speed from 35,000 to 60,000 RPM to suit a variety of grinding applications. The grinder offers precision deburring, finishing, and engraving. The user sets the speed with a dial,...
- From The Fabricator
Stainless steel levelers have rubber pad options
- Jun 23, 2014
- Shop Management
- Product Release
J.W. Winco Inc. has introduced GN 340.5 stainless steel leveling mounts with tapped socket and rubber pad in inch and metric sizes. The RoHS-compliant leveling mounts feature a tapped socket of stainless steel with a shot-blast finish. They are available with two pad options: black pad inlay of...
- From The Fabricator
Optional safety equipment protects machinery users
- Jun 23, 2014
- Safety
- Product Release
MultiCam has added safety control options to its product line. New options, such as light curtains, safety mats, and laser safety eyewear, provide extra protection to the company’s router, laser, plasma, knife, waterjet, and digital finishing machines. The light curtains stop the cutting...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
- Upcoming Webcasts
Nitrogen Generation for Laser Cutting: Navigating System Design for YOUR Operation
- April 24, 2024
- Sponsored
- Presented By: Purity Gas