- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Hatch Stamping selects servo presses for single-part redesign
Global auto supplier redesigned a two-part assembly in to a single part
- May 27, 2019
- Article
- Bending and Forming
If you drive a vehicle that was made or assembled in North America, chances are it is equipped with a part or assembly manufactured by a company that started in the garage of one of three Hatch brothers 66 years ago. Today, under the leadership of President and COO Dan Craig, Hatch Stamping Co. employs more than 1,300 people and operates out of 13 manufacturing and technology centers and warehouses around the world, including in Michigan, Tennessee, Mexico, China, and Europe.
Hatch Stamping is a full-service provider to OEMs, Tier 1, and Tier 2 suppliers. The manufacturer supplies roofing, fuel, chassis, interiors, seating, and braking systems.
While its core competency is highly engineered metal stampings, the manufacturer also performs design and engineering, tool- and diemaking, prototyping, welding, assembly, and e-coating. In addition to more than 50 stamping presses, the company’s facilities house weld cells, robots, assembly cells, e-coat lines, and wire to tube forming equipment.
“Our customers are looking for innovative solutions and efficiency realization, including advanced engineering support and related services,” Craig said.
Servo Press for Simplified Setup, Slide Velocity
As Hatch Stamping’s customers requested more intricate parts, the need to have additional equipment to meet the requirements became evident. Director of Industrial Engineering Stewart Claucherty and his team considered getting another link-motion press.
In the search for the new presses, Hatch found that servo press technology had many features that were impressive and would meet its needs. In addition to simplified installation, a fully automated line was very important to Hatch, which was something servo press technology could offer.
Also, its powerful servo motor has fully programmable slide motion, as well as precise control of speed throughout the duration of the draw. Anticipation of speed and output acceleration resulting from the presses’ programmable stroke were also among the decision points.
“As we looked into the designs further, we made the decision that servo press technology would be the best option for Hatch Stamping,” Claucherty said.
Two Presses
Rather than go to the expense and time of installing one very large press, Hatch decided to go with two new AIDA DSF-N2-3000 330-ton servo presses to allow for easy and quick installation. The presses were set up side by side in the Hatch Stamping facility in Chelsea, Mich. It was necessary to have an automated shuttle system to move the parts between the two presses. The Hatch team put its engineering expertise to work to create a robust transfer system. The transfer system required the engineers to design and build all of the sensors, locators, and conveyors.
Two-part Assembly Redesigned as One
The manufacturer redesigned a two-part assembly as a single part. The company selected its new servo presses to enable it to meet its customers’ need for innovation. The simplified setup, design flexibility, latest press technology, and exceptional press delivery time led to this selection. Additionally, anticipation of speed and output acceleration because of the presses’ programmable stroke were also among the decision points.
The newly designed system has a custom control panel and feed line, which ensures parts moving from press to press through the conveyor are in the right place at the right time—stamping precision at its best! The customized system works beautifully, allowing each press to operate in a nonsynchronized fashion but also in unison.
Overall, the team is convinced that installing the two AIDA 330-ton servo presses was the best decision to meet the challenges of the redesign.
Hatch Stamping Co. is ISO 14001/IATF 16949 certified and a Ford Q1 Partner, www.hatchstamping.com
AIDA, www.aida-global.com
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY