The WELDER
The real world for welding professionals
This bold bimonthly magazine from the people who publish The FABRICATOR® features the top-quality editorial and innovative graphic design readers worldwide have come to expect from us. The WELDER was created to fill a void in the industry for hands-on information, real-world applications, and down-to-earth advice for welders, both hobbyists and professionals. No other welding magazine fills the need for this kind of practical information, and subscriptions are free to qualified welding professionals in North America.
2135 Point Blvd
Elgin, IL 60123
Phone: 815-399-8700
Fax: 815-484-7700
Sales Contact
Jim Gorzek
Sales Manager
Email: jimg@thefabricator.com
Recent Content on The Fabricator for The WELDER
-
- From The Welder
PWTV: Plasma Cutting Tools Overview
Jim Colt of Hypertherm discusses different options for cutting tools, machines, ratings for various processes, and pierce/production ratings.
-
- From The Welder
PWTV: Plasma Cutting Fume Venting Overview
From Harper College in Palatine, IL - Jim Colt of Hypertherm discusses the various ways to control fumes in your cutting operation.
-
- From The Welder
PWTV: Plasma Cutting Duty Cycles Overview
From the metal fabrication labs at Harper College, Jim Colt of Hypertherm gives an overview of plasma cutting duty cycles; environmental factors, capabilities, and other things to consider.
-
- From The Welder
PWTV: Plasma Cutting Consumables Overview
Jim Colt, of Hypertherm, discusses air plasma torches, machine torches, the differences between them and the rate of wear for various consumables.
-
- From The Welder
PWTV: An Introduction to Shop Automation
Samantha Noland from nexAir provides a brief overview on the benefits of automation in a shop environment.
-
- From The Welder
PWTV: Shielding Gas Function
Samantha Noland of nexAir provides a brief overview of the physics of welding gases.
-
- From The Welder
PWTV: Handling Gas Cylinders Safely
Gas cylinders can pose a huge safety risk if they are cared for and/or handled improperly. Samantha Noland of nexAir outlines a few best practices to make sure you are handling your cylinders safely.
-
- From The Welder
PWTV: GMAW Pulsed-Spray
Todd Bridigum, welding instructor at Minneapolis Community and Technical College, and author of, "How to Weld," tackles the basics behind pulsed-spray transfer mode.
-
- From The Welder
PWTV: GMAW Aluminum
Todd Bridigum, welding instructor at Minneapolis Community and Technical College, and author of, "How to Weld," explains the art of aluminum GMAW.
-
- From The Welder
PWTV: Aluminum Welding Principles
Todd Bridigum, welding instructor at Minneapolis Community and Technical College and author of, “How to Weld,” provides an overview of the various principles behind welding aluminum successfully.
-
- From The Welder
PWTV: Aluminum TIG welding
In this episode, Todd Bridigum, welding instructor at Minneapolis Community and Technical College and author of, “How to Weld,” focuses specifically on aluminum TIG welding.
-
- From The Welder
PWTV: Highlights of FABTECH 2013
Weren't able to attend FABTECH® 2013? Here is just a sample of the welding exhibitors who had new products on display.
-
- From The Welder
PWTV: Artist Gallery: Joe Mongan, Metalscapes
This PWTv Webisode highlights Roscoe, Ill. metal artist Joe Mongan, Metalscapes LLC, who discovered a creative streak that he never knew existed … until recently.
-
- From The Welder
PWTV: Tips on Plasma Cutting
In this Practical Welding Television webisode, learn how to improve your Plasma Cutting skills.
-
- From The Welder
PWTV: Artist Gallery: Joe Mongan Demonstrates Gouging
This Practical Welding Television webisode highlights Roscoe, Ill. metal artist and repair welder Joe Mongan, Metalscapes LLC, who takes us through a job that requires gouging.