Thermal Dynamics
Recent Content on The Fabricator for Thermal Dynamics
-
- From The Fabricator
Plasma systems can be connected to double cutting output
Thermal Dynamics Automation’s new UC series high-precision automated plasma power supplies offer cutting power from 130 to 800 amps for piercing mild steel up to 2 in.
-
- From The Fabricator
UC series plasma power supplies from Thermal Dynamics can be connected to double cutting output
Thermal Dynamics Automation’s new UC series of automated plasma power supplies features four models offering cutting power from 130 to 800 amps for piercing mild steel up to 50 mm and stainless steel up to 100 mm.
-
- From The Fabricator
Rethinking what plasma cutting can do for metal fabricators
Advances in plasma cutting technology have the potential to make life easier for metal fabricators and service centers that cut a lot of thick ferrous and nonferrous materials. Here are some questions that can help plate processors understand what plasma cutting technology has to offer.
-
- From The Fabricator
Thermal Dynamics Automation’s Ultra-Cut 130 XT plasma cutting system cuts 3/4-in. steel at 52 IPM
Thermal Dynamics Automation has introduced the Ultra-Cut 130 XT high-precision plasma power source and new 130-amp XT torch and consumables. With a cutting output of 130 amps at 100% duty cycle, the system is designed for piercing and cutting 3/4-in. steel, stainless, and aluminum. Compared to the...
-
- From The Fabricator
Thermal Dynamics announces upgrades to 400-amp cutting system
Thermal Dynamics Automation has upgraded its 400-amp plasma cutting system—featuring Ultra-Cut 400 XT high-precision power source, XT torch with QuickPierce consumables, and iCNC Performance Controller—to reduce piercing time by up to 40% on mild steel thicknesses from 1.25 to 2.0 in....
-
- From The Fabricator
Thermal Dynamics Cutmaster 40 plasma cutter cuts steel up to ½ in. thick
Thermal Dynamics®, an ESAB brand, offers the Cutmaster® 40 manual plasma cutting system. The 22-lb. unit uses 115- to 230-V primary power and delivers a rated output of 40 amps at 40% duty cycle. On 230-V primary, it delivers a recommended cut and pierce capacity on 1/2-in. steel and can sever...
-
- From The Fabricator
An edge up on plasma cut quality
Precision plasma cutting has come a long way, and the technology that helps create the process’s clean, almost glassy edge—with little to no taper or edge rounding—continues to get better.
-
- From The Fabricator
Plasma cutter offers high power-to-weight ratio
Thermal Dynamics®, an ESAB brand, has unveiled its new Cutmaster™ 60i hand-held air plasma cutting system. According to the company, the system provides the industry’s highest power-to-weight ratio in its class. It also incorporates an oversized digital interface. New functions include a gas...
High-precision plasma system automates Chromalox’s cutting, beveling processes
Chromalox, a manufacturer of industrial heating systems, relied on skilled workers do quite a few manual processes, especially cutting and beveling. As the supply of people with this skill slowly dried up, the company realized that it would need to invest in an automated system. It chose an Ultra-Cut 400 XT plasma power supply from Thermal Dynamics (Victor) and coupled it to a 6-axis CNC pipe-handling system from Watts Specialties Inc.
-
- From The Fabricator
90-degree manual plasma cutting torch released
Thermal Dynamics has announced the release of the 90-degree 1Torch. It uses the same 30 consumables as the 75-degree model to cover the spectrum of manual plasma cutting and gouging from 20 amps through 120 amps. Designed as a replacement torch, it can be combined with an adapter to allow for...
-
- From The Fabricator
Cutting, gouging system works on 1 1/2 –in. metal
Thermal Dynamics® has introduced its CUTMASTER™ 151 air plasma cutting and gouging system, a 100-amp unit that cuts on a range of metal up to 1 in. thick. The system is suitable for heavy fabrication, maintenance, and manufacturing environments that deal with thick plate, such as scrap...