Senior Editor
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
The end of the steel price decline might be near
The softening of demand in the manufacturing sector puts a new focus on steel supply activities
- By Michael Cowden
- UPDATED July 19, 2022
- July 19, 2022
Let’s get the bad news out of the way.
I usually start with steel prices and lead times. But I’d like to start with demand this time, because, Houston, we have a problem.
About 40% of people responding to the last survey from the Steel Market Update (SMU) reported decreasing demand. That’s the highest reading we’ve seen in our surveys since the outset of the pandemic in spring 2020.
I have been saying for the first six months of this year that stable demand was the sauce that made volatile steel prices palatable. That’s no longer the case. Only 54% report that demand is stable, and only a small minority says it is increasing (see Figure 1).
Also, we’ve done some initial calculations, and it looks like this feedback on demand might actually affect lead times. In other words, lead times are an advanced indicator of price moves, and people’s feelings about demand might be an advanced indicator of lead times.
Why do I find that worrisome? Go back to summer 2020 (see Figure 2). We had prices in the $400s/ton then, but almost everyone was reporting that demand was stable or improving. Also, lead times were steadily extending even as prices continued to fall to a low of $440/ton in August of that year.
Based on those occurrences, you could already have concluded in late August or early September 2020 that things were going to change if you were tracking some of our non-price data closely. Demand was improving and lead times were extending, which meant that prices in the $400s/ton clearly were about to increase.
This summer, the reverse is true. Look at lead times (see Figure 3).
SMU’s hot-rolled lead times averaged four weeks in our last survey, the shortest they have been since mid-February. That’s also down from a 2022 peak of 5.8 weeks in April. Sources tell us that three weeks is becoming more and more common as mills struggle to fill order books.
We’ve seen similar trends for other products, even for plate—which has had relatively stable pricing compared to hot-rolled coil (HRC). The expectation is that prices will continue to move lower. As a result, respondents to our surveys keep adjusting their price forecasts lower from one survey to the next.
Port Chaos Easing?
It’s not just steel prices where we’re seeing cause for concern. Remember the chaos everyone experienced late last year and early this year with congested ports, the driver shortage, and the lack of warehouse space?
Some of those issues are still with us. Bringing in a cargo of galvanized steel from abroad? Good luck finding indoor warehouse space for that. Trying to send steel out to the West Coast via rail? Your carrier might ask you to find a truck instead.
But chaos at ports appears to be easing. For instance, the International Longshore & Warehouse Union, which represents 22,000 dock workers at 29 West Coast ports, put out a press release noting that union members at the ports of Los Angeles and Long Beach, the posterchild for port congestion, cleared more cargo in June than in any month in the port’s 115-year history.
Remember that chaos is not all bad. It means there is a lot of volume to move. Volume means money and economic activity.
A Sliver of a Silver Lining for the Mills
What is the silver lining here for the steel industry? It’s perhaps that the rate of steel price declines has slowed. Our HRC price was down $190/ton from mid-June to mid-July. That’s 28% less than the $265/ton drop from mid-May to mid-June.
Put another way, HRC prices hit a post-Russia-invasion-of-Ukraine peak of $1,480/ton in mid to late April. They were $910/ton in our last check of the market in mid-July. That’s a decline of $47.5/ton a week.
There is this notion that mills will draw a line in the sand at $800/ton or maybe $750/ton. Pick your number. Perhaps they will do that with idlings, reduced output, or extended maintenance outages. These are typical levers to pull to try to buy time. They can help to reduce supply, but they don’t do much to stimulate demand.
Still, I suggest keeping an eye not only on where and when prices will hit bottom but also on when lead times and prices might start rebounding. Why? Well, on a very basic level, you can’t continue to see price declines of about $50/ton per week for a whole lot longer before you’re at or near the cost of production.
Also, as I’ve written before, steel is famous for its recency bias. When prices are going up, we think they’ll go up forever, and when prices are falling, we tend to think better days will never come. The thing is, they do—even if it’s hard to predict when.
In the meantime, good luck out there, and I hope to see some of you soon at our Steel Summit in Atlanta.
Steel Market Update Events
SMU’s Steel Summit, the biggest annual steel gathering of its kind in North America, is happening Aug. 22-24 in Atlanta at the Georgia International Convention Center. There is a free tram between the airport and the convention center, so getting to the event is about as easy as it gets.
About 1,200 decisionmakers from the sheet and plate industries are expected to attend. Some nearby hotels are already sold out, so register soon if you haven’t already.
If you register, you’ll have access to our discounted room blocks. You can do that here.
For more information about SMU in general or to sign up for a free trial subscription, email info@steelmarketupdate.com.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Michael Cowden
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
USS Midway’s tuition-free welding program a win-win
San Diego landmark becomes floating classroom for student welders
K&S celebrates 50 years in business
Guiding metal fabrication’s automation transformation
Increasing revenue by applying production concepts to sales and marketing
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY